Somehow one of my hard drives got a raid header on it, causing it to
start automatically sometimes when not needed. It's on /dev/hda, my
main system disk, which is not RAID at all. Running mdadm -E /dev/hda I
get:
---
phoenix alan # mdadm -E /dev/hda
/dev/hda:
On Sunday 25 March 2007, Alan [EMAIL PROTECTED] wrote about '[gentoo-user]
getting rid of raid header':
Somehow one of my hard drives got a raid header on it, causing it to
start automatically sometimes when not needed. It's on /dev/hda, my
main system disk, which is not RAID at all. Running
Neil Bothwick [EMAIL PROTECTED] writes:
On Sat, 24 Mar 2007 04:29:25 -0400, [EMAIL PROTECTED] wrote:
You can also make this change permanent by adding
=mail-mta/sendmail-8.14.0
to /etc/portage.package.mask
Neil was the above a typo? Or is it correct that using greater than
Hi,
I have an instance of hardened sources using selinux as a webserver.
2.6.16 is running fine however 2.6.18-r6 boots up, but it's terribly slow
and won't allow any network connection. I compiled the new kernel with
the old .config using make oldconfig and there weren't many new sec-
config
Hi. I have a strange problem with a small card reader I use for
certain types of memory cards such as low voltage sd cards. I have
used this in that other operating systems and the card is seen by that
other system and even another Linux distribution I used to use, but
when I insert the reader
Hi list,
I wanted to know whether it's planned to add TiLP2 to the portage tree
any time soon. I read http://bugs.gentoo.org/show_bug.cgi?id=109220 and
http://bugs.gentoo.org/show_bug.cgi?id=112985, however the last updates
were about 5 months ago.
I'm asking because I would like to be able to
Dale wrote:
Well, I will know soon enough. The bank itself will be changing to
this mess in a few days. If it doesn't work, I'll just call customer
service to find out my balance because it will be much faster than
trying to get it on the internet. This is if I can get in at all.
Right
On Sunday 25 Mar 2007 7:06:33 pm Dale wrote:
That said, I don't like using Konqueror as a web browser. How do I get
Seamonkey to either not ID itself or something so this will work? I
looked in preferences and I can't find anything in there to change.
You can always try installing user
Abhay Kedia wrote:
On Sunday 25 Mar 2007 7:06:33 pm Dale wrote:
That said, I don't like using Konqueror as a web browser. How do I get
Seamonkey to either not ID itself or something so this will work? I
looked in preferences and I can't find anything in there to change.
You can
Hello,
I've got a big problem...I can't compile anything or install software.
Reason : last week I need to emerge the new gcc 4.1.1. I made this
without to follow the gentoo tutorialSince, I can't compile because
I get an error concercing C++ (not found!).
Today, I would like to retrieve a
On Saturday 24 March 2007 06:30:58 Dale wrote:
You may want to either sync again or run emerge --metadata one. I seem
to recall running into this and it can't update the database without
that link being correct. The metadata part should fix it.
Not necessary. I just recreated
Arnaud FARINE wrote:
Hello,
I've got a big problem...I can't compile anything or install software.
Reason : last week I need to emerge the new gcc 4.1.1. I made this
without to follow the gentoo tutorialSince, I can't compile
because I get an error concercing C++ (not found!).
Today, I
This may be a silly question, but I am trying to understand if Maya is free
for Linux - despite it being a commercial product.
The License page says that we should go to http://www.aliaswavefront.com/spar
to register, but the link is dead.
What do you know about this package and the license
On Sun, Mar 25, 2007 at 04:03:32AM -0500, Boyd Stephen Smith Jr. wrote:
On Sunday 25 March 2007, Alan [EMAIL PROTECTED] wrote about '[gentoo-user]
getting rid of raid header':
Somehow one of my hard drives got a raid header on it, causing it to
start automatically sometimes when not needed.
Mick wrote:
This may be a silly question, but I am trying to understand if Maya is free
for Linux - despite it being a commercial product.
The License page says that we should go to http://www.aliaswavefront.com/spar
to register, but the link is dead.
What do you know about this package and
-Original Message-
From: Zac Medico [mailto:[EMAIL PROTECTED]
The problem is that portage-2.1.2.2 will automatically exclude the
digest files during sync. In order to make the sync compatible with
portage-2.0.x, you can override the PORTAGE_RSYNC_OPTS variable
that's defined in
I just emerged gparted-0.3.3, and find a couple of things I don't
understand. As there seems to be no documentation (even on
SourceForge), I'm asking here.
1) It complains about being unable to open /dev/nbd1 throught
/dev/nbd16; I have no idea what these are.
2) There is a warning sign and a
Bo Ørsted Andresen wrote:
emerge --metadata is completely unrelated. You are probably speaking of one
of
the issues at http://www.gentoo.org/proj/en/portage/doc/common-problems.xml
See `man emerge` to see what --metadata does...
I just know it fixed it. I was told on the forums to
Hello list,
After a recent sync I get
Invalid atom in /usr/portage/profiles/package.mask:
=media-video/ffmpeg-0.4.9-p20070325
anytime I issue an emerge command.
I wonder whether this is particular to my system.
Thanks,
--
Valmor
--
gentoo-user@gentoo.org mailing list
Am Sonntag, den 25.03.2007, 15:38 -0400 schrieb de Almeida, Valmor F.:
Hello list,
After a recent sync I get
Invalid atom in /usr/portage/profiles/package.mask:
=media-video/ffmpeg-0.4.9-p20070325
anytime I issue an emerge command.
I wonder whether this is particular to my system.
-Original Message-
From: Marc Joliet [mailto:[EMAIL PROTECTED]
Am Sonntag, den 25.03.2007, 15:38 -0400 schrieb de Almeida, Valmor F.:
I wonder whether this is particular to my system.
That would likely be - as a quick eix ffmpeg -v showed - that the
entry should look like this:
In news:[EMAIL PROTECTED],
Marc Joliet [EMAIL PROTECTED] wrote:
Am Sonntag, den 25.03.2007, 15:38 -0400 schrieb de Almeida, Valmor F.:
After a recent sync I get
Invalid atom in /usr/portage/profiles/package.mask:
=media-video/ffmpeg-0.4.9-p20070325
anytime I issue an emerge
On Sunday 25 March 2007, Kevin O'Gorman [EMAIL PROTECTED] wrote
about '[gentoo-user] Questions about gparted':
1) It complains about being unable to open /dev/nbd1 throught (sic)
/dev/nbd16; I have no idea what these are.
Block devices exposed by the 'nbd' module. The nbd module allows block
Konstantinos Agouros wrote:
I have an instance of hardened sources using selinux as a
webserver. 2.6.16 is running fine however 2.6.18-r6 boots up, but
it's terribly slow
The 2.6.18 kernel was slow for me too (normal gentoo-sources), not
terribly, but noticeably sluggish. You might try
On Sunday 25 March 2007, Alan [EMAIL PROTECTED] wrote about 'Re:
[gentoo-user] getting rid of raid header':
On Sun, Mar 25, 2007 at 04:03:32AM -0500, Boyd Stephen Smith Jr. wrote:
On Sunday 25 March 2007, Alan [EMAIL PROTECTED] wrote about
'[gentoo-user]
getting rid of raid header':
-Original Message-
From: Marc Joliet [mailto:[EMAIL PROTECTED]
Maybe I'm putting too much thought to it and making a big deal over a
trivial typo.
See previous e-mail from Q on this list. It is a bug. I just did a
new emerge --sync and fixed.
Thanks,
--
Valmor
--
Hello,
I anyone else bumping into this message after a recent emerge --sync
followed by system and world update?
!!! A file listed in the Manifest could not be found:
/usr/portage/net-fs/nfs-utils/files/nfs.confd.old
emerge system will complete but not emerge world.
There isn't a bug filed
Hi All,
I changed the CPU on an old box from a PIII 600MHz to a PIII 733MHz. Then
updated the box and sys-apps/microcode-ctl-1.15 was installed. Since then
it's been coming up with errors:
===
# /etc/init.d/microcode_ctl restart
* Caching service
In message [EMAIL PROTECTED], de Almeida, Valmor F. wrote:
I anyone else bumping into this message after a recent emerge --sync
followed by system and world update?
Yes, I got this message this afternoon.
--
Regards
Dave [RLU#314465]
==
-Original Message-
From: news [mailto:[EMAIL PROTECTED] On Behalf Of Q
See http://bugs.gentoo.org/show_bug.cgi?id=172200. I filed the bug
earlier today, and lu_zero has taken ownership, so hopefully it will
be
resolved soon.
I did a recent emerge --sync and the problem has been
On Sun, 2007-03-25 at 18:05 -0400, de Almeida, Valmor F. wrote:
Hello,
I anyone else bumping into this message after a recent emerge --sync
followed by system and world update?
!!! A file listed in the Manifest could not be found:
/usr/portage/net-fs/nfs-utils/files/nfs.confd.old
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
de Almeida, Valmor F. wrote:
!!! A file listed in the Manifest could not be found:
/usr/portage/net-fs/nfs-utils/files/nfs.confd.old
http://bugs.gentoo.org/show_bug.cgi?id=172231
Now on my other boxes I proceeded with an emerge --sync to sync the
-Original Message-
From: Zac Medico [mailto:[EMAIL PROTECTED]
de Almeida, Valmor F. wrote:
!!! A file listed in the Manifest could not be found:
/usr/portage/net-fs/nfs-utils/files/nfs.confd.old
http://bugs.gentoo.org/show_bug.cgi?id=172231
The bug has been fixed.
The
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
de Almeida, Valmor F. wrote:
Now that my rsync local server has been upgraded to portage 2.1.2.2,
should I still keep
PORTAGE_RSYNC_OPTS=--recursive --links --safe-links --perms --times
--compress --force --whole-file --delete --delete-after
Try emailing your bank? It may be that their website uses some sort of Windows
script via MSIE (which I am led to believe allows sites to do stuff with your
local machine, I know at work if I open the intranet in MSIE it knows who I am
from my NT logon, but in firefox I have to enter username
35 matches
Mail list logo
