On Monday 13 August 2007, Uwe Thiem [EMAIL PROTECTED] wrote about 'Re:
[gentoo-user] Internet bridge':
On 13 August 2007, Mateus Interciso wrote:
but since I really need Level 2 Routing, I can't afford doing
this with nat.
I beg your pardon? NATting and masquerading takes place on layer 2
On Monday 13 August 2007 21:38:18 Mateus Interciso wrote:
Now comes the tricky part, since the internet I recieve is via DHCP, and
on eth1, if I make: dhcpcd eth1, it timesout, but if I use dhclient eth1,
it works, almost, I can get an IP at least, so I've sticked with this
Others seem to have
Mateus Interciso escribió:
Hi, basically, I want to share the internet using a Bridge on a pc with
two NICS, one for internet, the other for Internal Network.
Now, I know a easiest approuch would be to use NAT, which is how I'm
doing now, but since I really need Level 2 Routing, I can't afford
Hello
On Mon, Aug 13, 2007 at 10:42:17PM +0100, Mick wrote:
Hmm, I just checked a utf-8 file after I edited it and it says:
:set encoding
encoding=latin1
I would guess your UTF-8 file has no accents, or other characters. In
other words, it can be considered pure ASCII, which means Vim can
On Mon, 13 Aug 2007 21:50:36 -0700 Grant [EMAIL PROTECTED] wrote:
Another system wants to unmerge a bunch of crucial stuff
with --depclean, including:
x11-base/xorg-x11
selected: 7.1
protected: none
omitted: none
x11-apps/xdm
selected: 1.0.5
protected: none
Hello Grant,
Another
system wants to unmerge a bunch of crucial stuff with --depclean,
including:
x11-base/xorg-x11
selected: 7.1
protected: none
omitted: none
x11-apps/xdm
selected: 1.0.5
protected: none
omitted: none
Manually put both in:
Hi!
On Mon, 13 Aug 2007 22:48:28 -0700 (PDT) Richard Broersma Jr
[EMAIL PROTECTED] wrote:
Can anyone explain or point out a link that describes the process of
adding a file type extension for syntax high-lighting?
I would like to configure vim to automatically recognize the .X68
file type
On 14 August 2007, Boyd Stephen Smith Jr. wrote:
On Monday 13 August 2007, Uwe Thiem [EMAIL PROTECTED] wrote about 'Re:
[gentoo-user] Internet bridge':
On 13 August 2007, Mateus Interciso wrote:
but since I really need Level 2 Routing, I can't afford doing
this with nat.
I beg your
Hi,
I just checked that GHC has no use flags other than doc. My first
question is: can its documentation be generated without having to
compile ghc? Shouldn't its documentation be included as a different
package? (ghc's doc use flag pulling ghc-doc as a post-installation
dependency).
Cheers,
On 13/08/07, Benno Schulenberg [EMAIL PROTECTED] wrote:
Mick wrote:
Hmm, I just checked a utf-8 file after I edited it and it says:
:set encoding
encoding=latin1
I assume this means that it was changed from utf8 to latin1
No. To see what encoding a file has, you could use 'file'.
On 14/08/07, Michal 'vorner' Vaner [EMAIL PROTECTED] wrote:
Hello
On Mon, Aug 13, 2007 at 10:42:17PM +0100, Mick wrote:
Hmm, I just checked a utf-8 file after I edited it and it says:
:set encoding
encoding=latin1
I would guess your UTF-8 file has no accents, or other characters. In
In this morning I can win the battle with expat.
I did this , maybe help someonelse :
emerge --sync
emerge --update --deep world
(failed)
revdep-rebuid -X
(failed , gtk+)
emerge gettext
emerge XML-Parser
emerge fontconfig
emerge cairo
emerge pango
revdep-rebuild -X
revdep-rebuild -X
(all the
Am Dienstag 14 August 2007 01:59:22 schrieb Elyahou ITTAH:
When I load the alsa-modules snd-hda-intel, i have this error:
FATAL: Error inserting snd_hda_intel
(/lib/modules/2.6.22-gentoo-r2/misc/pci/hda/snd-hda-intel.ko): Invalid
module format
In the dmesg :
snd_hda_intel: version magic
I have compile the modules from the alsa-driver- because my sound
chipset cause some problems ( Realtek ALC 268) In the kernel config I
actually changed in processor type from PENTIUM to CORE
How i can can fix this now ?
2007/8/14, Florian Philipp [EMAIL PROTECTED]:
Am Dienstag 14 August
2007/8/14, Elyahou ITTAH [EMAIL PROTECTED]:
I have compile the modules from the alsa-driver- because my sound
chipset cause some problems ( Realtek ALC 268) In the kernel config I
actually changed in processor type from PENTIUM to CORE
How i can can fix this now ?
2007/8/14, Florian
On Tuesday 14 August 2007 01:59:22 Elyahou ITTAH wrote:
When I load the alsa-modules snd-hda-intel, i have this error:
FATAL: Error inserting snd_hda_intel
(/lib/modules/2.6.22-gentoo-r2/misc/pci/hda/snd-hda-intel.ko): Invalid
module format
In the dmesg :
snd_hda_intel: version magic
On Tue, 14 Aug 2007 08:11:13 +0200, Abraham Marín Pérez wrote:
Mateus Interciso escribió:
Hi, basically, I want to share the internet using a Bridge on a pc with
two NICS, one for internet, the other for Internal Network. Now, I know
a easiest approuch would be to use NAT, which is how I'm
(Sorry for resend, but it looks like this msg didn't reach the list.)
At Mon, 13 Aug 2007 21:15:20 -0400 Dan Cowsill [EMAIL PROTECTED] wrote:
Wow. Well, contrary to my expectations, my system (after emerge
-uDNav world) exhibits every one of the problems that you had. At
least you can take
On Tuesday 14 August 2007, Mateus Interciso wrote:
I need a level 2 routing, beacause of the damn IP Phone we have at the
office.
Here's the deal, first we had a win2003 server, doing the bridge, all
worked, then we decided to put a linux box as a firewall and dhcp
server, for this I've made
Ignore what other folks are saying about NATting - if you don't want
to do it that way, then don't. I don't think there's any need to. My
ISP gives me a static /28 subnet of 8 IP addreses (5 usable) wiht my
ADSL connection - if I genuinely want to allocate one of these
properly to a
Hi,
On Mon, 13 Aug 2007 19:38:18 + (UTC) Mateus Interciso
[EMAIL PROTECTED] wrote:
Hi, basically, I want to share the internet using a Bridge on a pc
with two NICS, one for internet, the other for Internal Network.
Uhm, yeah, I'd like a bridge to the internet, too. To bad the internet
is
On Tue, 14 Aug 2007 15:44:37 +0200, Hans-Werner Hilse wrote:
Hi,
On Mon, 13 Aug 2007 19:38:18 + (UTC) Mateus Interciso
[EMAIL PROTECTED] wrote:
Hi, basically, I want to share the internet using a Bridge on a pc with
two NICS, one for internet, the other for Internal Network.
Uhm,
--- Renat Golubchyk [EMAIL PROTECTED] wrote:
Hi!
On Mon, 13 Aug 2007 22:48:28 -0700 (PDT) Richard Broersma Jr
[EMAIL PROTECTED] wrote:
Can anyone explain or point out a link that describes the process of
adding a file type extension for syntax high-lighting?
I would like to
On 8/13/07, Allan Gottlieb [EMAIL PROTECTED] wrote:
I updated to the new gnome. After battling the expat problem, I was
able to get a clean emerge and an empty revdep-rebuild (with Bo's
help).
But gnome is broken on this system (others have reported similar
problems).
In my case basically
Hello,
I own an IBM Thinkpad T60 with an integrated fingerprint reader. Now
when I follow the configuration guide of this site:
http://thomasgersdorf.com/linux/index.php/Gentoo_Linux_on_IBM_ThinkPad_T60#Fingerprint_reader
I get following errormessage:
When I execute the following command: emerge
Hello,
I own an IBM Thinkpad T60 with an integrated fingerprint reader. Now
when I follow the configuration guide of this site:
http://thomasgersdorf.com/linux/index.php/Gentoo_Linux_on_IBM_ThinkPad_T60#Fingerprint_reader
I get following errormessage:
When I execute the following command: emerge
Hi,
On Tue, 14 Aug 2007 13:53:51 + (UTC) Mateus Interciso
[EMAIL PROTECTED] wrote:
Ok, so my ISP gives my just one IP, as it you have already guessed,
and yes, probably I did mixed up a lot of stuff, and I'm terrible
sorry for this.
Oh, that's just fine for me, it's probably yourself
Hello the.real.kabel,
When I execute the following command: emerge -av bioapi tfm-fingerprint
pam_bioapi
Completed installing bioapi-1.2.2 into
/var/tmp/portage/sys-auth/bioapi-1.2.2/image/
--- ACCESS VIOLATION SUMMARY
---
LOG FILE =
On Tue, 14 Aug 2007 16:32:20 +0200, Hans-Werner Hilse wrote:
Hi,
On Tue, 14 Aug 2007 13:53:51 + (UTC) Mateus Interciso
[EMAIL PROTECTED] wrote:
Ok, so my ISP gives my just one IP, as it you have already guessed, and
yes, probably I did mixed up a lot of stuff, and I'm terrible sorry
Neil Bothwick schrieb:
Hello the.real.kabel,
When I execute the following command: emerge -av bioapi tfm-fingerprint
pam_bioapi
Completed installing bioapi-1.2.2 into
/var/tmp/portage/sys-auth/bioapi-1.2.2/image/
--- ACCESS VIOLATION
On 8/14/07, Dan Cowsill [EMAIL PROTECTED] wrote:
On 8/13/07, Allan Gottlieb [EMAIL PROTECTED] wrote:
I updated to the new gnome. After battling the expat problem, I was
able to get a clean emerge and an empty revdep-rebuild (with Bo's
help).
But gnome is broken on this system (others
Three of my systems are having package management trouble. One of the
systems does this after revdep-rebuild:
All ebuilds that could satisfy =sys-devel/gcc-4.1.1 have been masked.
# ls -ld /etc/make.profile
lrwxrwxrwx 1 root root 56 Oct 1 2006 /etc/make.profile -
Another system wants to unmerge a bunch of crucial stuff
with --depclean, including:
x11-base/xorg-x11
selected: 7.1
protected: none
omitted: none
x11-apps/xdm
selected: 1.0.5
protected: none
omitted: none
Manually put both in:
On Tuesday 14 August 2007, Iván Pérez Domínguez
[EMAIL PROTECTED] wrote about '[gentoo-user] GHC and
documentation':
Shouldn't its documentation be included as a different
package?
That may be the way Debian does things, but gentoo does not split
documentation, header files, or debug
Hello Grant,
Shouldn't gdm depend on xdm though?
In the same way that vim depends on emacs. gdm and xdm (also kdm) are
different programs to fdo the same basic job, there's no reason for one
to depend on the other.
Do I need xorg-x11 on a typical desktop system? My laptop doesn't
seem to
Hi list!
I just switched from my old mail address to Gmail (Googlemail here in Germany,
but basically the same). Now I don't receive my own messages to the list
anymore. At first I thought the list was filtering them out but now someone
responded to one of my posts.
Is Gmail filtering these
On Tuesday 14 August 2007, Florian Philipp [EMAIL PROTECTED]
wrote about '[gentoo-user] OT: Receiving your own emails':
Is Gmail filtering these messages or what's going on?
They are received, and I think they are even stored but, gmail doesn't show
your own mails to you by default. I'm not
Shouldn't gdm depend on xdm though?
In the same way that vim depends on emacs. gdm and xdm (also kdm) are
different programs to fdo the same basic job, there's no reason for one
to depend on the other.
I didn't know that, thanks.
Do I need xorg-x11 on a typical desktop system? My laptop
Hi Florian,
Unfortunately yes, this is problem of Gmail. Switch to other SMTP
service and you will receive your own messages.
Tuesday, August 14, 2007, 6:54:16 PM, you wrote:
Hi list!
I just switched from my old mail address to Gmail (Googlemail here in Germany,
but basically the same).
I have recompiled all the modules and i have the same errors...
2007/8/14, Naga [EMAIL PROTECTED]:
On Tuesday 14 August 2007 01:59:22 Elyahou ITTAH wrote:
When I load the alsa-modules snd-hda-intel, i have this error:
FATAL: Error inserting snd_hda_intel
On Tue, 14 Aug 2007 08:55:05 -0700 Grant [EMAIL PROTECTED] wrote:
Do I need xorg-x11 on a typical desktop system? My laptop doesn't
seem to think it is installed at all:
Probably because it isn't, because you don't need it.
Ok, what does xorg-x11 do?
It's meta package that installs
Do I need xorg-x11 on a typical desktop system? My laptop doesn't
seem to think it is installed at all:
Probably because it isn't, because you don't need it.
Ok, what does xorg-x11 do?
It's meta package that installs xorg-server and some basic X11
stuff. Look into the ebuild
Am Dienstag 14 August 2007 18:02:01 schrieb Boyd Stephen Smith Jr.:
On Tuesday 14 August 2007, Florian Philipp [EMAIL PROTECTED]
wrote about '[gentoo-user] OT: Receiving your own emails':
Is Gmail filtering these messages or what's going on?
They are received, and I think they are even
Hi!
I just thought I should give reiserfs3.6 a chance and converted my laptop's
root to it. I've done the following:
1. boot from Gentoo's live cd
2. start sshd and set root password
3. mount root and boot
4. mount their mount point on my desktop via sshfs
5. create a tar ball
6. unmount
On Tuesday 14 August 2007 17:18:13 Grant wrote:
Three of my systems are having package management trouble. One of
the systems does this after revdep-rebuild:
All ebuilds that could satisfy =sys-devel/gcc-4.1.1 have been
masked.
# ls -ld /etc/make.profile
On Tuesday 14 August 2007 19:59:30 Robert Cernansky wrote:
('kernel_linux' is some internal USE flag which is probably automatically
set if you are using linux kernel).
It's set by your profile via USE_EXPAND (KERNEL=linux).
--
Bo Andresen
signature.asc
Description: This is a digitally
Am Dienstag 14 August 2007 19:59:58 schrieben Sie:
Hi!
I just thought I should give reiserfs3.6 a chance and converted my laptop's
root to it. I've done the following:
1. boot from Gentoo's live cd
2. start sshd and set root password
3. mount root and boot
4. mount their mount point on my
Mick wrote:
Or, I leave Vim encoding alone and run export LANG=en_GB.UTF-8
and Vim will use that.
Did I get this right?
Precisely. But why don't you just try it and see how it behaves?
PS. What I am not entirely sure about is where is the locale set
for my system?
When it's not set
Three of my systems are having package management trouble. One of
the systems does this after revdep-rebuild:
All ebuilds that could satisfy =sys-devel/gcc-4.1.1 have been
masked.
# ls -ld /etc/make.profile
lrwxrwxrwx 1 root root 56 Oct 1 2006
('kernel_linux' is some internal USE flag which is probably automatically
set if you are using linux kernel).
It's set by your profile via USE_EXPAND (KERNEL=linux).
Then why does --depclean want to remove madwifi-ng?
# equery depends madwifi-ng
[ Searching for packages depending on
Hello Florian Philipp,
3. mount root and boot
4. mount their mount point on my desktop via sshfs
5. create a tar ball
6. unmount everything, create reiserfs, remount everything
7. extract tar ball, edit fstab
8. reboot
Now I have the following problem: If I boot, the kernel starts
On Tuesday 14 August 2007 18.39.22 Elyahou ITTAH wrote:
I have recompiled all the modules and i have the same errors...
_and_ the kernel? If so I have no more ideas.
2007/8/14, Naga [EMAIL PROTECTED]:
On Tuesday 14 August 2007 01:59:22 Elyahou ITTAH wrote:
[...]
snd_hda_intel: version
On Mon, 13 Aug 2007 13:32:04 -0700
Joshua Doll [EMAIL PROTECTED] wrote:
Bo Ørsted Andresen wrote:
On Monday 13 August 2007 21:43:03 Joshua Doll wrote:
I find the easiest solution is to link /usr/lib/libexpat.so.1.5.2 to
/usr/lib/libexpat.so.0, but I don't think that's the right of
On Tuesday 14 August 2007 20:28:27 Grant wrote:
('kernel_linux' is some internal USE flag which is probably
automatically set if you are using linux kernel).
It's set by your profile via USE_EXPAND (KERNEL=linux).
Then why does --depclean want to remove madwifi-ng?
# equery depends
On Tuesday 14 August 2007 20:22:37 Grant wrote:
[SNIP]
My mistake. That system used this profile:
/usr/portage/profiles/hardened/x86/2.6
[SNIP]
Quite the contrary. The hardened is incompatible with gcc 4.x. Thus
=sys-devel/gcc-4* is masked in all profiles under hardened. Since you
On 14/08/07, Florian Philipp [EMAIL PROTECTED] wrote:
Am Dienstag 14 August 2007 18:02:01 schrieb Boyd Stephen Smith Jr.:
On Tuesday 14 August 2007, Florian Philipp [EMAIL PROTECTED]
wrote about '[gentoo-user] OT: Receiving your own emails':
Is Gmail filtering these messages or what's
Am Dienstag 14 August 2007 20:37:59 schrieb Neil Bothwick:
Hello Florian Philipp,
3. mount root and boot
4. mount their mount point on my desktop via sshfs
5. create a tar ball
6. unmount everything, create reiserfs, remount everything
7. extract tar ball, edit fstab
8. reboot
On 8/14/07, Michael Higgins [EMAIL PROTECTED] wrote:
Anyway, it seems like there's a problem resolving emerge order I think
you must emerge -u expat, then XML-Parser, then revdep-rebuild, then auDNv
world.
Perhaps forcing rebuild of XML-Parser and gettext after updating expat would
be
Hi,
On Tue, 14 Aug 2007 14:48:30 + (UTC)
Mateus Interciso [EMAIL PROTECTED] wrote:
Ok, thanks a lot, this for sure cleared a lot of troubles I was having on
my head.
:-) The thing is, the more deeper you look into things, the more you
get aware that they are more simple than you thought.
Am Dienstag 14 August 2007 21:41:09 schrieben Sie:
Am Dienstag 14 August 2007 21:23:54 schrieben Sie:
Am Dienstag 14 August 2007 20:37:59 schrieb Neil Bothwick:
Hello Florian Philipp,
3. mount root and boot
4. mount their mount point on my desktop via sshfs
5. create a tar
At Tue, 14 Aug 2007 10:49:56 -0400 Dan Cowsill [EMAIL PROTECTED] wrote:
An interesting development: I removed my user from the system and
deleted his home folder. After that, I made the user again and tried
logging in. I got a whole bunch of configuration errors... But I
don't understand
I also had gnome working fine, then one day it failed for no apparent
reason, I hadn't emerged anything for a bit that I recall.
I did emerge unmerge nautilus and then emerge nautilus which seemed
to to do the trick for me. why? voodoo. why nautilus and not some
other component? IIRC
\o/ I finally installed the alsa-driver 1.0.14 withs patches files and I now
have the sound.
Thx for all
2007/8/14, Naga Toro [EMAIL PROTECTED]:
On Tuesday 14 August 2007 18.39.22 Elyahou ITTAH wrote:
I have recompiled all the modules and i have the same errors...
_and_ the kernel? If so I
When i wan't to mount my windows partition ( AHCI NTFS ) with ntfs3g i got
this error:
# ntfs-3g /dev/sda1 /mnt/windows/
$LogFile indicates unclean shutdown (0, 0)
Failed to mount '/dev/sda1': Operation not supported
Mount is denied because NTFS is marked to be in use. Choose one action:
Choice
Em Terça 14 Agosto 2007 18:50, Elyahou ITTAH escreveu:
When i wan't to mount my windows partition ( AHCI NTFS ) with ntfs3g i got
this error:
# ntfs-3g /dev/sda1 /mnt/windows/
$LogFile indicates unclean shutdown (0, 0)
Failed to mount '/dev/sda1': Operation not supported
Mount is denied
On 14 Aug 2007, at 22:50, Elyahou ITTAH wrote:
When i wan't to mount my windows partition ( AHCI NTFS ) with
ntfs3g i got this error:
# ntfs-3g /dev/sda1 /mnt/windows/
$LogFile indicates unclean shutdown (0, 0)
Failed to mount '/dev/sda1': Operation not supported
Mount is denied because
Florian Philipp wrote:
Am Dienstag 14 August 2007 20:37:59 schrieb Neil Bothwick:
Hello Florian Philipp,
3. mount root and boot
4. mount their mount point on my desktop via sshfs
5. create a tar ball
6. unmount everything, create reiserfs, remount everything
7. extract tar ball, edit fstab
8.
At Tue, 14 Aug 2007 20:20:07 + (UTC) Thufir [EMAIL PROTECTED] wrote:
I also had gnome working fine, then one day it failed for no apparent
reason, I hadn't emerged anything for a bit that I recall.
I did emerge unmerge nautilus and then emerge nautilus which seemed
to to do the trick
Allan Gottlieb wrote:
I created a new user testgot with the same uid as gottlieb
and it works. There must be something in my config (and yours) that
is bad for the old user.
I can balance my checkbook with the new user so the panic is gone, but
something needs to be fixed somewhere.
Try
At Wed, 15 Aug 2007 01:27:57 +0200 Markus Schönhaber [EMAIL PROTECTED] wrote:
Allan Gottlieb wrote:
I created a new user testgot with the same uid as gottlieb
and it works. There must be something in my config (and yours) that
is bad for the old user.
I can balance my checkbook with the
On Tue, 2007-08-14 at 02:04 +, James wrote:
Now on to converting them to Mpeg4-avc (h.264).
I would be interested in seeing the command line (or program options)
that you settle on for this process. I was using mencoder and ffmpeg a
while back to do similar things, and I found most of
One DVB card? How do you manage? I have one dual-tuner card and one
single tuner card in my mythbox!
hardware encoding / decoding. The biggest thing that slows my box down is
mysql.
On 8/9/07, Thierry de Coulon [EMAIL PROTECTED] wrote:
On Thursday, 9. August 2007, Eric Martin wrote:
I
On Mon, 2007-08-13 at 11:29 +0100, Stroller wrote:
I don't believe that's the case for video cameras, which usually use
firewire for video transfer.
I have a customer who bought a DV camcorder with a USB socket it
transpired that this socket was only capable of transferring photos
On Mon, 2007-08-13 at 08:02 +0200, Andreas Niederl wrote:
Hi,
Iain Buchanan wrote:
so I ran `revdep-rebuild --library=libstdc++.so.6` but that got stuck on
eix:
src/eix: /usr/lib/gcc/i686-pc-linux-gnu/3.4.6/libstdc++.so.6: version
`CXXABI_1.3.1' not found (required by src/eix)
Hi all,
How to check emerge-webrsync is working download ?
Thanks,
kitti
--
[EMAIL PROTECTED] mailing list
75 matches
Mail list logo