On Thursday 11 June 2009, Philip Webb wrote:
090611 Philip Webb wrote:
You can test this by restoring the settings in KDE,
then without rebooting check they're there in Fluxbox,
then reboot see what has happened, presumably they wb lost again.
Actually, there are 2 possibilities, at
On 12 Jun 2009, at 06:46, Graham Murray gra...@gmurray.org.uk wrote:
Norman Rieß nor...@smash-net.org writes:
What do you want to do with your accesspoint. You will need a bridge
to a wired network if you want your ap attached to that wired
network. This is quite usual though...
Without a
Hi list!
I'm thinking about buying a graphics tablet to facilitate my work with
Dia and Inkscape. The price tag should be below EUR 100.
At the moment, I'm wondering if I should go with a Wacom or an Aiptek.
Are they similarly good (bad?) supported on Linux?
Any gotchas with xorg-server-1.5.3's
Hi list!
I'm currently trying to install the Plone-CMS on my vServer. However,
for some reason, Zope and Plone just don't get together.
I've followed this howto: [1] I've also looked at other docs around the
net as well as Plone's readme.
Zope runs and I can access it. Plone is installed and
Paul Hartman schrieb:
On Thu, Jun 11, 2009 at 3:07 PM, Kelly Hiraike...@met.fsu.edu wrote:
the N270 is a single core with hyperthreading, which will apear as 2
cpus (with the same core id) in dmesg.
Ah, I forgot about hyperthreading masquerading as multiple CPUs. In
that case, Maxim can
Grant schrieb:
Leave INTERFACES blank. As you keep the networks seperated, hostapd does not
depend on any other devices.
wlan0 is initialized by hostapd. So you are good to go.
The accesspoint itself, so to say the wlan part does not have any IP adress,
at it is merely a connectionpoint for
Alexander Pilipovsky schrieb:
bn and KH, exuse me if I send not a good question, I have no many
experience yet :)
That's where all of us started on day ;-)
kh
bn schrieb:
Isn't do A if you are in situation X , because of Z the right pattern?
m.
That's only if situation x is constant and absolutely known to the one
replying. But then it might not be of any use for somebody else. Most
likely there will not be a second person with the exact same
On Friday 12 June 2009 12:48:24 KH wrote:
bn schrieb:
Isn't do A if you are in situation X , because of Z the right pattern?
m.
That's only if situation x is constant and absolutely known to the one
replying. But then it might not be of any use for somebody else. Most
likely there will
On Friday 12 June 2009, 12:58, Alan McKinnon wrote:
The original question was how big should /var be? and the correct
answer to that question is mu (google it)
If we had the output of df -h and du -sh /var/* plus a description
of what the machine actually does, some general advice could be
Leave INTERFACES blank. As you keep the networks seperated, hostapd does
not
depend on any other devices.
wlan0 is initialized by hostapd. So you are good to go.
The accesspoint itself, so to say the wlan part does not have any IP
adress,
at it is merely a connectionpoint for normal wlan
On 2009-06-12, Mark Knecht markkne...@gmail.com wrote:
Use the Gentoo specific info on the www.MythTV.org site and
you'll do fine.
At the risk of seeming a bit dim... what Gentoo specific info?
The page at http://www.mythtv.org/wiki/Linux_Distros#Gentoo has
4 links to Gentoo setup guides.
On 2009-06-12, Mike Kazantsev mk.frag...@gmail.com wrote:
But old gentoo-wiki pages were recovered from google cache and
now reside at gentoo-wiki.info.
http://www.gentoo-wiki.info/HOWTO_Setup_MythTV
http://www.gentoo-wiki.info/Category:MythTV
Bingo!
--
Grant Edwards
Is there a way to veiw the very latest packages on portage without
syncing my OS?
Harry Putnam schrieb:
Is there a way to veiw the very latest packages on portage without
syncing my OS?
http://sources.gentoo.org/viewcvs.py/gentoo-x86/
signature.asc
Description: OpenPGP digital signature
On Fri, Jun 12, 2009 at 9:29 AM, Justinjus...@j-schmitz.net wrote:
Harry Putnam schrieb:
Is there a way to veiw the very latest packages on portage without
syncing my OS?
http://sources.gentoo.org/viewcvs.py/gentoo-x86/
also http://packages.gentoo.org/
or http://gentoo-portage.com/Newest
Trying to install procmail I hit a known bug:
http://bugs.gentoo.org/show_bug.cgi?id=270551
And from emerge:
[...]
In file included from formail.c:25:
formisc.h:20: error: conflicting types for 'getline'
/usr/include/stdio.h:651: error: previous declaration of 'getline'
was here
Florian Philipp schrieb:
Hi list!
I'm currently trying to install the Plone-CMS on my vServer. However,
for some reason, Zope and Plone just don't get together.
I've followed this howto: [1] I've also looked at other docs around the
net as well as Plone's readme.
Zope runs and I can
Florian Philipp schrieb:
Florian Philipp schrieb:
Hi list!
I'm currently trying to install the Plone-CMS on my vServer. However,
for some reason, Zope and Plone just don't get together.
I've followed this howto: [1] I've also looked at other docs around the
net as well as Plone's readme.
Grant schrieb:
Leave INTERFACES blank. As you keep the networks seperated, hostapd does
not
depend on any other devices.
wlan0 is initialized by hostapd. So you are good to go.
The accesspoint itself, so to say the wlan part does not have any IP
adress,
at it is merely a connectionpoint for
Leave INTERFACES blank. As you keep the networks seperated, hostapd
does
not
depend on any other devices.
wlan0 is initialized by hostapd. So you are good to go.
The accesspoint itself, so to say the wlan part does not have any IP
adress,
at it is merely a connectionpoint for normal wlan
On 12 Jun 2009, at 14:17, Grant wrote:
...
wlan0 in master mode does _not_ have an IP adress. So far eth0 is
the only
ip adress your device has.
If you do not spezify a local ip adress on eth1, you will not have
any local
ip adress.
I'm very confused. I've been running wlan0 in master
On 12 Jun 2009, at 16:38, Grant wrote:
...
OK, thank you Norman. The reason I'm trying to switch (this is my
third serious attempt) is some kind of a bug that crashes the system
when SMP is enabled and the madwifi driver is in master mode. I've
been running without SMP, but I could really use
I'm just now learning how to compile and install manually. I
installed makemkv-1.4.1 manually and now I found an ebuild so I'd like
to install the latest version via the ebuild, but I get:
# make uninstall
make: *** No rule to make target `uninstall'. Stop.
The makefile doesn't mention
Etaoin Shrdlu wrote:
On Friday 12 June 2009, 12:58, Alan McKinnon wrote:
The original question was how big should /var be? and the correct
answer to that question is mu (google it)
If we had the output of df -h and du -sh /var/* plus a description
of what the machine actually does, some
On 12 Jun 2009, at 15:40, Paul Hartman wrote:
On Fri, Jun 12, 2009 at 9:29 AM, Justinjus...@j-schmitz.net wrote:
Harry Putnam schrieb:
Is there a way to veiw the very latest packages on portage without
syncing my OS?
http://sources.gentoo.org/viewcvs.py/gentoo-x86/
also
On Fri, Jun 12, 2009 at 11:02 AM, Grantemailgr...@gmail.com wrote:
I'm just now learning how to compile and install manually. I
installed makemkv-1.4.1 manually and now I found an ebuild so I'd like
to install the latest version via the ebuild, but I get:
# make uninstall
make: *** No rule
Grant emailgr...@gmail.com writes:
I'm just now learning how to compile and install manually. I
installed makemkv-1.4.1 manually and now I found an ebuild so I'd like
to install the latest version via the ebuild, but I get:
# make uninstall
make: *** No rule to make target `uninstall'.
Stroller strol...@stellar.eclipse.co.uk writes:
It's not really clear why you're asking, or why you're unable to sync.
If the PC has no internet connection, for instance, security updates
are unimportant.
Thanks for the tips... no it was something totally mundane.
I wanted to see if anything
Stroller schrieb:
On 12 Jun 2009, at 16:38, Grant wrote:
...
OK, thank you Norman. The reason I'm trying to switch (this is my
third serious attempt) is some kind of a bug that crashes the system
when SMP is enabled and the madwifi driver is in master mode. I've
been running without SMP, but
Harry Putnam wrote:
Stroller strol...@stellar.eclipse.co.uk writes:
It's not really clear why you're asking, or why you're unable to sync.
If the PC has no internet connection, for instance, security updates
are unimportant.
Thanks for the tips... no it was something totally
I'm having some weirdness with my '/' mount. Here's the line from /etc/fstab:
douglas ~ # grep 'md3' /etc/fstab
/dev/md3 / ext4 noatime,journal_checksum,defaults 0 1
Yet, the output of mount shows:
douglas ~ # mount
rootfs on / type rootfs (rw)
/dev/root on / type ext4
Dale rdalek1...@gmail.com writes:
You could always sync then do a emerge -uv procmail. then it would only
upgrade procmail and any friends that need to be updated. That would
mostly likely miss most of the other updates that you are wanting to
skip for the moment.
yeah... its a thought...
On Fri, Jun 12, 2009 at 11:28 AM, Doug Hunleyd...@hunley.homeip.net wrote:
I'm having some weirdness with my '/' mount. Here's the line from /etc/fstab:
douglas ~ # grep 'md3' /etc/fstab
/dev/md3 / ext4 noatime,journal_checksum,defaults 0 1
Yet, the output of mount shows:
douglas ~
On Fri, Jun 12, 2009 at 12:41, Paul
Hartmanpaul.hartman+gen...@gmail.com wrote:
I think your root is mounted before fstab comes into play... You may
want to look into the rootflags option in your grub kernel
commandline for passing the mount options for your root partition.
That jives with
On Fri, Jun 12, 2009 at 9:07 AM, Strollerstrol...@stellar.eclipse.co.uk wrote:
On 12 Jun 2009, at 15:40, Paul Hartman wrote:
On Fri, Jun 12, 2009 at 9:29 AM, Justinjus...@j-schmitz.net wrote:
Harry Putnam schrieb:
Is there a way to veiw the very latest packages on portage without
syncing
On 06/12/2009 07:44 PM, Doug Hunley wrote:
On Fri, Jun 12, 2009 at 12:41, Paul
Hartmanpaul.hartman+gen...@gmail.com wrote:
I think your root is mounted before fstab comes into play... You may
want to look into the rootflags option in your grub kernel
commandline for passing the mount options
Hi group,
I've read references here and in other forums to building packages on
a desktop PC and installing them on a note/netbook remotely as a way
of relieving stress on the smaller machine.
Can someone point me to the documentation or howto? I can't seem to
come up with the proper google
I'm just now learning how to compile and install manually. I
installed makemkv-1.4.1 manually and now I found an ebuild so I'd like
to install the latest version via the ebuild, but I get:
# make uninstall
make: *** No rule to make target `uninstall'. Stop.
The makefile doesn't mention
On Fri, 12 Jun 2009 09:45:27 -0700
Mark Knecht markkne...@gmail.com wrote:
I've wanted a way to do something like this for a long time. One
problem with the way portage works with ( I guess) rsync or whatever
it uses is that when someone decides to remove a package from portage
that I'm
Paul Hartman wrote:
On Thu, Jun 11, 2009 at 11:45 AM, Mike Kazantsevmk.frag...@gmail.com wrote:
So, my question: Is there a way to tell depclean to never remove *any*
version of gentoo-sources?
That's where portage-2.2 sets find another use.
Just add following set to
Hi group,
Following the LVM2 gentoo doc I have in fstab:
...
/dev/vg/tmp /tmp ext2 noatime 0 2
...
But also(suggested by the eee forum):
...
#shm/dev/shmtmpfs nodev,nosuid,noexec 0 0
tmpfs /tmptmpfs defaults,noatime,mode=1777 0 0
Is this legal?
On Fri, Jun 12, 2009 at 16:45, Maxim Wexlermaxim.wex...@gmail.com wrote:
Hi group,
Following the LVM2 gentoo doc I have in fstab:
...
/dev/vg/tmp /tmp ext2 noatime 0 2
...
But also(suggested by the eee forum):
...
#shm /dev/shm tmpfs nodev,nosuid,noexec 0 0
On Friday 12 June 2009 18:05:29 Dale wrote:
Alan's point is, there is no way for us to know that. Example, I
sometimes use http-replicator on my machine which is placed in /var.
Therefore, that alone could need 2 to 3GBs. If you use ccache, then add
some more. Also, doesn't portage use
On Fri, Jun 12, 2009 at 14:08, Maxim Wexlermaxim.wex...@gmail.com wrote:
Hi group,
I've read references here and in other forums to building packages on
a desktop PC and installing them on a note/netbook remotely as a way
of relieving stress on the smaller machine.
Can someone point me to
I'm really sorry to keep beating on this portage stuff and I guess I
must be something of a dimwit since I find just about anything to do
with portage and emerge that is outside `emerge -flags whatever'
to be really hard to catch on to, even though (and shouldn't admit
this) I've been running
Am Freitag 12 Juni 2009 21:54:45 schrieb Daniel da Veiga:
Is this legal? Mounting two things at the same place?
AFAIK, no.
Yes. However, unless you do union mounts, you'll only see what's mounted last.
Bye...
Dirk
signature.asc
Description: This is a digitally signed message
On 12 Jun 2009, at 20:59, Harry Putnam wrote:
...
For something like this it seems way overkill to have a separate
custom /usr/local/portage where I build my own. Especially since I
find that whole process difficult and way overkill for this problem.
Further its something that will almost
Hi
As I'm still on KDE 3.X, I've got several package updates, but most of them
are blocking each other:
[blocks B ] kde-base/kcontrol:3.5 (kde-base/kcontrol:3.5 is blocking
kde-base/kdebase-3.5.9-r4)
[blocks B ] kde-base/kicker:3.5 (kde-base/kicker:3.5 is blocking
Am Freitag 12 Juni 2009 21:56:04 schrieb Alan McKinnon:
There's a few guidlelines one can give (but only a few). The variables tend
to be large than the amounts with guidelines though.
/var/tmp/portage should be at least 1G on a modern system, 6G+ if building
mozilla stuff and OOo is
OK, thank you Norman. The reason I'm trying to switch (this is my
third serious attempt) is some kind of a bug that crashes the system
when SMP is enabled and the madwifi driver is in master mode. I've
been running without SMP, but I could really use the extra power.
That's interesting. I
Am Freitag 12 Juni 2009 22:24:26 schrieb Francisco Ares:
It looks like there's some issue in some packages being 3.5.10 and all the
rest being 3.5.9, but I have no keywords set in
/etc/portage/packages.keywords - perhaps I should.
Partly. It seems to be a mix of split ebuilds and monolithic
On Fri, 12 Jun 2009 14:59:53 -0500
Harry Putnam rea...@newsguy.com wrote:
Isn't there a simple way to introduce the sed run in procmail sources
during emerge?
man 1 ebuild
ebuild /usr/portage/mail-filter/procmail configure
(do-some-sed-in-/var/tmp)
ebuild
Mike Kazantsev wrote:
On Fri, 12 Jun 2009 15:11:07 -0400
David da...@pythontoo.com wrote:
What would I add to /etc/portage/sets.conf to exclude gcc from depclean?
thanks
I'd add these to sets:
[gcc-preserve]
class = portage.sets.shell.CommandOutputSet
command =
Stroller strol...@stellar.eclipse.co.uk writes:
But if you consider it a hassle, just mask the buggy version of
procmail forget about the problem.
Thanks... I thought of something like that but then noticed there's only
one version available in portage.
At that point I downloaded the
Am Freitag 12 Juni 2009 22:45:49 schrieb Francisco Ares:
And how do I tell if an ebuild is monolithic or not?
The monolithic ones install larger parts of KDE, and usually have the same
names as the original source packages offered at KDE.org.
The split ebuilds, well, split those packages into
Mike Kazantsev mk.frag...@gmail.com writes:
On Fri, 12 Jun 2009 14:59:53 -0500
Harry Putnam rea...@newsguy.com wrote:
Isn't there a simple way to introduce the sed run in procmail sources
during emerge?
man 1 ebuild
ebuild /usr/portage/mail-filter/procmail configure
Harry Putnam wrote:
Dale rdalek1...@gmail.com writes:
You could always sync then do a emerge -uv procmail. then it would only
upgrade procmail and any friends that need to be updated. That would
mostly likely miss most of the other updates that you are wanting to
skip for the moment.
Mike Kazantsev mk.frag...@gmail.com writes:
man 1 ebuild
ebuild /usr/portage/mail-filter/procmail configure
(do-some-sed-in-/var/tmp)
ebuild /usr/portage/mail-filter/procmail merge
Many thanks for the tips... and hugely usefull.
But:
Yikes I may have jumped the gun thinking I was
Dale rdalek1...@gmail.com writes:
I was thinking about NOT doing the emerge -u world part. That would
skip updating everything that has updates applied on your system. Doing
just a emerge -u procmail would only update procmail and the
dependencies if any are needed.
Keep in mind, you can
On Fri, Jun 12, 2009 at 13:45, Mark Knechtmarkkne...@gmail.com wrote:
On Fri, Jun 12, 2009 at 9:07 AM, Strollerstrol...@stellar.eclipse.co.uk
wrote:
On 12 Jun 2009, at 15:40, Paul Hartman wrote:
On Fri, Jun 12, 2009 at 9:29 AM, Justinjus...@j-schmitz.net wrote:
Harry Putnam schrieb:
Is
On 6/12/09, Daniel da Veiga danieldave...@gmail.com wrote:
On Fri, Jun 12, 2009 at 16:45, Maxim Wexlermaxim.wex...@gmail.com wrote:
Hi group,
Following the LVM2 gentoo doc I have in fstab:
...
/dev/vg/tmp /tmp ext2 noatime 0 2
...
But also(suggested by the eee forum):
...
On 6/12/09, Mike Kazantsev mk.frag...@gmail.com wrote:
On Fri, 12 Jun 2009 13:45:04 -0600
Maxim Wexler maxim.wex...@gmail.com wrote:
#shm /dev/shmtmpfs nodev,nosuid,noexec 0 0
I wonder, what's the rationale behind commenting out shm?
Good question. I was given to understand
On Friday 12 June 2009, Stroller wrote:
At that time the only other 802.11g driver that did master mode was, I
think, Prism54 and it was a little difficult to get hold of cards
featuring that chipset (consequently I got into the side-business of
selling them, and probably have 20 left
When I use the medium quality libsamplerate resampler with mpd, my CPU
is around 15% and all is well. When I try to use the best quality
resampler, the CPU stays around 99% and the sound frequently falls
apart. Can I give mpd CPU priority?
- Grant
On Fri, 2009-06-12 at 16:22 -0500, Harry Putnam wrote:
i486-pc-linux-gnu-gcc -O2 -march=i486 -pipe -fno-inline-functions2
-march=i486 -pipe -fno-inline-functions _autotst.c -o _autotst -Wl,-O1
cc1: error: unrecognized command line option -fno-inline-functions2
What do put in your CFLAGS
Arttu V. arttu...@gmail.com writes:
On Fri, 2009-06-12 at 16:22 -0500, Harry Putnam wrote:
i486-pc-linux-gnu-gcc -O2 -march=i486 -pipe -fno-inline-functions2
-march=i486 -pipe -fno-inline-functions _autotst.c -o _autotst
-Wl,-O1 cc1: error: unrecognized command line option
Thanks a lot!
Francisco
On Fri, Jun 12, 2009 at 5:58 PM, Dirk Heinrichs dirk.heinri...@online.dewrote:
Am Freitag 12 Juni 2009 22:45:49 schrieb Francisco Ares:
And how do I tell if an ebuild is monolithic or not?
The monolithic ones install larger parts of KDE, and usually have the same
On Fri, 2009-06-12 at 18:39 -0500, Harry Putnam wrote:
Here is what is in there right now.. apparently from the stage3
pulled down during install a few days ago.
CFLAGS=-O2 -march=i486 -pipe
CXXFLAGS=-O2 -march=i486 -pipe
CHOST=i486-pc-linux-gnu
Is there a reason to use i486 stage3?
On Fri, Jun 12, 2009 at 1:08 PM, Maxim Wexlermaxim.wex...@gmail.com wrote:
Hi group,
I've read references here and in other forums to building packages on
a desktop PC and installing them on a note/netbook remotely as a way
of relieving stress on the smaller machine.
Can someone point me to
On Fri, Jun 12, 2009 at 18:46, Maxim Wexlermaxim.wex...@gmail.com wrote:
On 6/12/09, Daniel da Veiga danieldave...@gmail.com wrote:
On Fri, Jun 12, 2009 at 16:45, Maxim Wexlermaxim.wex...@gmail.com wrote:
Hi group,
Following the LVM2 gentoo doc I have in fstab:
...
/dev/vg/tmp /tmp
On Fri, Jun 12, 2009 at 5:52 PM, Maxim Wexlermaxim.wex...@gmail.com wrote:
On 6/12/09, Mike Kazantsev mk.frag...@gmail.com wrote:
On Fri, 12 Jun 2009 13:45:04 -0600
Maxim Wexler maxim.wex...@gmail.com wrote:
#shm /dev/shm tmpfs nodev,nosuid,noexec 0 0
I wonder, what's the
090612 Mick wrote:
I've rebooted twice with same kernel (gentoo-2.6.29-r5)
and the settings seem to have stuck.
Not sure what I've done differently before to cause the settings to be lost.
No changes of kernel here (same as yours).
I've experimented with the same experience as you :
(1) (with
Further steps reveal something re the problem:
(8) reboot: restart KDE: ok; (9) restart FB: Krusader 'open with' ok
(yes, these repeat steps 6-7 in the previous msg);
(10) reboot: restart FB : try Krusader: Cannot talk to klauncher !
(click to close msg box) when Krusader starts, 'open
Yet another step reveals the locus of the problem here at least:
(11) try to run 'klauncher' from CLI : must be started by Kdeinit;
(12) restart in KDE, fix Krusader + Apwal ;
(13) reboot restart FB but without 'kdeinit ' in ~/.xinitrc :
Krusader 'open with' ok !
So my problem seems to lie
I don't know if it is from kernel 2.6.30 or if something else changed,
but my keyboard does not behave as normal. It seems like the key up
signal from the previous key is causing the repeat of the current key
to get interrupted. This happens everywhere, not only in X, but in
console as well.
For
On Fri, 12 Jun 2009 21:52:20 -0400
Joshua Murphy poiso...@gmail.com wrote:
On Fri, Jun 12, 2009 at 5:52 PM, Maxim Wexlermaxim.wex...@gmail.com wrote:
On 6/12/09, Mike Kazantsev mk.frag...@gmail.com wrote:
On Fri, 12 Jun 2009 13:45:04 -0600
Maxim Wexler maxim.wex...@gmail.com wrote:
On Fri, 12 Jun 2009 16:02:00 -0700
Grant emailgr...@gmail.com wrote:
When I use the medium quality libsamplerate resampler with mpd, my CPU
is around 15% and all is well. When I try to use the best quality
resampler, the CPU stays around 99% and the sound frequently falls
apart. Can I give
When I use the medium quality libsamplerate resampler with mpd, my CPU
is around 15% and all is well. When I try to use the best quality
resampler, the CPU stays around 99% and the sound frequently falls
apart. Can I give mpd CPU priority?
Yes, it's usually done via nice/renice commands:
On Fri, 12 Jun 2009 21:45:02 -0700
Grant emailgr...@gmail.com wrote:
renice -20 -p `pgrep mpd`
but my Athlon 2.2Ghz still can't handle it for more than a few
seconds. I don't have SMP enabled because of a bug in madwifi, and
I'm hoping when I get that fixed I'll be able to run the best
I'm having a strange problem on my Q6600 that cropped up starting with
the 2.6.29 series of the kernel, and is still present in 2.6.30.
Essentially, at all times, I have four nice 19 processes running, which
for the sake of this post, we'll call dnetc. All four cores are
utilized. At this
81 matches
Mail list logo
