Hello every one, it´s beeing a long time since my last post.
I am having a little problem with my /usr partition, I had a /usr
partition of 3.0GB in a production server that is almost full ( 500MB
remaining ) the portage distfiles is located on other disk (
/home/portage ) and I do not know what
you just have to rerun grub setup.
On 10/30/06, James [EMAIL PROTECTED] wrote:
Hello,
Usually when installing a portable, I leeave the windows and resize the disk
space to set up gentoo as the second OS with grub..
On one portable, The windows XP was a pain so I nuked it and got gentoo
I am looking for c/c++ IDE
On 9/2/06, Remy Blank [EMAIL PROTECTED] wrote:
Allan Spagnol Comar wrote:
I am changing development from window to linux now, it took a long
time but I finally convince my boss to change, what I was holpping to
know is if there is any nice development IDE
Hi all,
I was hopping that some one know how I can let users ( not root )
mount samba share ( windows machines ). When I use root all work, when
I try if not a superuser it says that only root can mount
any clues ?
thanks, Allan
--
An application asked:
Requires Windows 9x, NT4 or better,
so
I am having a problem with my internet gateway, if I need to reboot it
it loses the route add commands that I did.
What I want to know is if there is any way to do this at boot, like route add
route add -net 10.8.0.0 netmask 255.255.255.0 gw 210.200.1.230
thanks, and sorry for the stupid
Hi all on the list; thanks for attention. I need to use fake RAID
because of windows ( I had incresed in 80% the performance of windows
because of the fake raid :) ). I know linux software RAID is good, and
I had already used on a box running just linux, but I really need to
use dual boot on this
Hi I use a A8N-E, with nvidia raid controler 2 segate SATA disks
working at RAID-0 ( sttriping ), I had installed gentoo base system
and grub successfully, but at boot time with kernel 2.6.16 it cannot
find device on /dev/mapper and with kernel 2.6.15-r1 it has a kernel
panic saiyng it can´t find
ok, I will keep it in one thread, but last one got killed or it look
like .. :(
in advance sorry.
On 6/26/06, Bo Ørsted Andresen [EMAIL PROTECTED] wrote:
On Monday 26 June 2006 14:24, Allan Spagnol Comar wrote:
Hi all on the list; thanks for attention.
For the future when you want more
/nv_xxx10 reiserfs /usr
/dev/mapper/nv_xxx11 reiserfs /home
My kernel configuration worked with 1 SATA drive on nvidia; it stop
working when I tried the RAID
On 6/26/06, Francesco Talamona [EMAIL PROTECTED] wrote:
On Monday 26 June 2006 20:28, Allan Spagnol Comar wrote:
Hi I use a A8N-E
I got:
title=gentoo linux 2.6.15-r1
root (hd0,4)
kernel=/vmlinuz-2.6.15-gentoo-r1 root=/dev/ram0 init=/linuxrc
real_root=/dev/mapper/nv_xxx7 dodmraid
initrd /initrd
On 6/26/06, Richard Fish [EMAIL PROTECTED] wrote:
On 6/26/06, Allan Spagnol Comar [EMAIL PROTECTED] wrote:
I tryed to dmraid
Good afternoon list.
I am trying now for 8 days to make nvidia RAID works on gentoo
systems; I pass trhought all stages, I had difficult make live cd
works, then after it works I have to use the hard way to make grub
install after all that I thought it was every thing cool and I
would be
Hi David, I will try downgrade the kernel, I will let you know if works.
On 6/22/06, David Helstroom [EMAIL PROTECTED] wrote:
David Helstroom wrote:
Allan Spagnol Comar wrote:
when I boot the systems ask for real_root /dev/mapper/nv_ device
I found the issue lay with Linux kernel 2.6.16
Hi list,
I have been trying for 5 days now to install a gentoo system on a
nvidia mother board with fake raid, I already have a windows system on
the machine that needs the raid and I want to install gentoo on it.
I have followed instructions on
no, I do not have a separated boot partition because I just have 2
disks with the raid, so I cannot have the separated boot partition.
But the boot starts and initrd and linuxrc are loaded ( apparently ).
On 6/21/06, Rumen Yotov [EMAIL PROTECTED] wrote:
Allan Spagnol Comar wrote:
Hi list,
I
:
On Wednesday 21 June 2006 18:34, Allan Spagnol Comar wrote:
no, I do not have a separated boot partition because I just have 2
disks with the raid, so I cannot have the separated boot partition.
But the boot starts and initrd and linuxrc are loaded ( apparently ).
Why not? Can you explain
Hi List
I am pretending to make a building host for slow host, I got and AMD
64x2 machine that I want to use to build gentoo systems to a i686
desktop machine and a i686 gateway
I was reading today on gentto wiki this article :
http://gentoo-wiki.com/HOWTO_Create_A_Build_Host
is there
Hi all,
I am trying to let a samba mount on my fstab withopu success,
I got :
//csdc/EngSoftware /mnt/engsoftsmbfs
username=commodity\\allan,noauto0 0
ont fstab, if I try to mount /mnt/engsoft, it asks the password and
could not complit the mount.
if I do mount -t smbfs
no, it doesn´t work, any more clues ?
On 5/23/06, Norman Rieß [EMAIL PROTECTED] wrote:
Hi all,
I am trying to let a samba mount on my fstab withopu success,
I got :
//csdc/EngSoftware /mnt/engsoftsmbfs
username=commodity\\allan,noauto0 0
ont fstab, if I try to
nice, the bar thing solved the problem with samba, I had never used
cifs, is it better ? in what things it is better then smbfs ?
thanks all for the atention, Allan
On 5/23/06, Richard Fish [EMAIL PROTECTED] wrote:
On 5/23/06, Allan Spagnol Comar [EMAIL PROTECTED] wrote:
//csdc/EngSoftware
thanks for the explanation. And what about samba project ? it doesn´t use SMB ?
On 5/23/06, Richard Fish [EMAIL PROTECTED] wrote:
On 5/23/06, Allan Spagnol Comar [EMAIL PROTECTED] wrote:
nice, the bar thing solved the problem with samba, I had never used
cifs, is it better ? in what things
hi norman, the problem was the two bars at the
username=commodity\\allan changed to commodity\allan solved the
problem
thanks.
On 5/23/06, Norman Rieß [EMAIL PROTECTED] wrote:
Allan Spagnol Comar schrieb:
no, it doesn´t work, any more clues ?
Well you could tell, what exactly does
Maybe this is a stupid question for the list, but I was wondering
about and try some search at google and I don´t find the reason why
gentoo hasn´t /etc/sysconfig folder .
some one on the list could enlight me !!! show me where to look and
the reasons that this directory doesn´t exists.
thanks, Justin I was hoping for an answer like that
On 5/23/06, Justin Findlay [EMAIL PROTECTED] wrote:
On 5/23/06, Allan Spagnol Comar [EMAIL PROTECTED] wrote:
Maybe this is a stupid question for the list, but I was wondering
about and try some search at google and I don´t find
xmms is working what is not working is the gnome sound events
but I will check xmms.
On 5/17/06, Kurt Guenther [EMAIL PROTECTED] wrote:
I'm not sure this is your problem, but XMMS uses OSS by default, so you
need to use the preferences to change it to ALSA.
--Kurt
Allan Spagnol
Hi everyone,
I am experiencing a real odd thing, I configured my kernel to alsa for
NVIDIA AC'97 sound card, the sound options had beeing done well since
cat /proc/asound/cards returns:
0 [CK804 ]: NFORCE - NVidia CK804
NVidia CK804 with ALC850 at 0xda003000, irq 11
I thought that anyone on the list could help me find out the problem,
give me a hint to where I can find the solution, maybe I was wrong
On 5/14/06, Allan Spagnol Comar [EMAIL PROTECTED] wrote:
Hi everyone,
I am experiencing a real odd thing, I configured my kernel to alsa for
NVIDIA AC
Hi everyone,
I am experiencing a real odd thing, I configured my kernel to alsa for
NVIDIA AC'97 sound card, the sound options had beeing done well since
cat /proc/asound/cards returns:
0 [CK804 ]: NFORCE - NVidia CK804
NVidia CK804 with ALC850 at 0xda003000, irq 11
Hi List,
I was wondering if someone could show me where to look information to
enable DRI/GLX on a ATI X300 PCI Express video board.
I was wanting to test some 3d games, but without enableing DRi is just
impossible.
Thanks, Allan
--
An application asked:
Requeires Windows 9x, NT4 or better,
so
thanks for the explanation.
On 5/5/06, Daniel da Veiga [EMAIL PROTECTED] wrote:
On 5/4/06, Allan Spagnol Comar [EMAIL PROTECTED] wrote:
Hi list,
I am instaling a new gentoo box with x86, and I have a doubt about
instaling xorg, I know that 7.0 is masked but almost getting stable,
and I
Hi, I am having a strange behavior on a gentoo x86 fresh install. Iam
trying to emerge gnome and I have the following message at top of
emerge -pv gnome
[blocks B ] virtual/xft (is blocking x11-base/xorg-x11-6.8.2-r7)
Don´t have a clue of what is happening and could not found nothing at
on this would be great.
Sincerely,
Christopher
On 5/4/06, Allan Spagnol Comar [EMAIL PROTECTED] wrote:
Hi, I am having a strange behavior on a gentoo x86 fresh install. Iam
trying to emerge gnome and I have the following message at top of
emerge -pv gnome
[blocks B ] virtual/xft
Hi, I have had a similar problem, and it was about the disk and
partition numering. When I configured grub, it seems to me that SATA
disk was disk 0, but when botting it was disk 1, I saw you try some
combination of numbers, but, you are sure about partition number ? it
was in fack at first
Hi all in the list,
I was wondering if some one can help me with that, I am try to put to
work a simple file share with samba where I will share a folder to any
one, and one folder have to autenticate users at pam
I try it like that:
[global]
workgroup = COMMODITY
netbios name =
= /home/sandbox
public = no
valid users = @sandbox
write list = @sandbox
On 4/7/06, Allan Spagnol Comar [EMAIL PROTECTED] wrote:
Hi all in the list,
I was wondering if some one can help me with that, I am try to put to
work a simple file share with samba where I
autentication on sandbox have worked, but, mp3 folder still block the
users .
have a clue ?
On 4/7/06, Michael Crute [EMAIL PROTECTED] wrote:
On 4/7/06, Allan Spagnol Comar [EMAIL PROTECTED] wrote:
Hi all in the list,
I was wondering if some one can help me with that, I am try to put
Hi all, I am about to update my gentoo box and I do not want that the
mantisbt package be upgraded. I would like to do it with more
attention after I had upgrade my system.
I had put =www-apps/mantisbt-1.0.0 ~x86 on my package.keywords file
and it still wants to upgrade mantis to 1.0.1 version.
if I put it will continue to try to upgrade instaled version 1.0.0
to 1.0.1 how can I maintain 1.0.0 instead of upgrading to 1.0.1 when I
do a emerge -pDu world. Sorry if I do not point myself cleared
On 4/6/06, Graham Murray [EMAIL PROTECTED] wrote:
Allan Spagnol Comar [EMAIL PROTECTED] writes
Hi list wise guys, I am trying to run emerge --metadata on a fresh
installed gentoo box and all I am receiving is segmentation fault
What Can I do, I can not emerge the rest of the systems I have to use
because emerge stops with segmentation fault every time .. :(
--
An application asked:
yes mike, I had, when it was rebuild the metadata after --sync it
crashs the first time.
now I am in trouble with my instalation.
On 3/23/06, Michael Crute [EMAIL PROTECTED] wrote:
On 3/23/06, Allan Spagnol Comar [EMAIL PROTECTED] wrote:
Hi list wise guys, I am trying to run emerge
thank you again
On 3/22/06, Nick Rout [EMAIL PROTECTED] wrote:
On Tue, 21 Mar 2006 22:38:44 -0300
Allan Spagnol Comar wrote:
thank you all guys, how can I discover masked versions ? just on package
site ?
thanks again for atention, Allan
To reiterate: There are some masked
Hi I was reading the bug report 114915 at gentoo bugzilla and it
mentions a patch to ebuid, I had downloaded the patch but I don't have
any clue about how can I apply it to current ebuid.
I had searched gentoo wiki and found nothing. Does some gentle soul
can help me with this stupid question ?
Hi, I don't know where should I post this kind of message, but I need
to use lilypond as one of my working tools. I got stunned when I saw
today that lilypond version available at portage tree is 2.0.3
the latest stable version is 2.6.5 and 2.0.3 is extreme old.
Is there a reason that
also find
the reason for later versions not being marked stable. The usual reason
however is lack of developers.
This aspect of gentoo is getting worse and worse. This is an
observation. not a complaint.
On Tue, 21 Mar 2006 19:44:21 -0300
Allan Spagnol Comar wrote:
Hi, I don't know where
Hi Jason,
I am suposing somethings here, but i guess that when you upgraded
apache the first time you lost your /etc/conf.d/apache file, so PHP
wasn enabled, when you downgrade it you unmerge it before ? if you
don, try it first and the emerge apache.
Good luck, Allan
On 3/14/06, Jason Ausmus
Thank you Boris, the forum topic has solved my problem.
On 2/28/06, Boris Fersing [EMAIL PROTECTED] wrote:
2006/2/28, Allan Spagnol Comar [EMAIL PROTECTED]:
Hi all, I am trying to emerge xscreensaver and I am having the following
error:
Hi,
libtool: link: `/usr/lib64/libGL.la
Hi all, I am trying to emerge xscreensaver and I am having the following error:
libtool: link: `/usr/lib64/libGL.la' is not a valid libtool archive
make[2]: *** [jiv] Error 1
make[2]: *** Waiting for unfinished jobs
x86_64-pc-linux-gnu-gcc -O3 -march=k8 -pipe -msse3 -mmmx -m3dnow -W
-Wall
if you are a gnome person, Anjuta is cool, no dependencies and no adds
to project !
On 2/24/06, Rafael Bugajewski [EMAIL PROTECTED] wrote:
Robert Leibl wrote:
ps: you said you wanted a class browser, so i will not do the use vim
sermon.
vim can also have a class browser plugin :P
--
It helps, thanks !!!
On 2/21/06, Mattias Merilai [EMAIL PROTECTED] wrote:
Allan Spagnol Comar wrote:
Hi all, I am having a bit of trouble trying to save alsamixer
settings. I had tried every little thing I know and could make it to
work, if I reboot my system alsamixer settings go all
Hi all, I am having a bit of trouble trying to save alsamixer
settings. I had tried every little thing I know and could make it to
work, if I reboot my system alsamixer settings go all to mute :(
Anyone have a clue about it ?
--
An application asked:
Requeires Windows 9x, NT4 or better,
so I´ve
[EMAIL PROTECTED] wrote:
i noticed that the system still freezes sometime i guess it's a kernel
problem maybe?
i think xorg 7.0 has DRI support for this videocard but why is it still
masked
On 2/15/06, Allan Spagnol Comar [EMAIL PROTECTED] wrote:
I can try that . and then I
:39 -0200, Allan Spagnol Comar wrote:
I am using 2.6.15-r4, and 8.22.15 ati driver
can some thing with frame buffer ?
what framebuffer are you using? vesafg, vesafb-tng, or one of the
kernel ati-framebuffers?
(you could try this command)
$ grep FB /usr/src/linux/.config
I can try that . and then I will tell you.
On 2/15/06, Ghaith Hachem [EMAIL PROTECTED] wrote:
it worked for me after i installed the lastest ati drivers they were masked
On 2/15/06, Allan Spagnol Comar [EMAIL PROTECTED] wrote:
I am using gcc, I am suspecting now that it has a conflict
Hi Gentoo-List, I am having a bit of a problem with my gentoo box
running as a gateway/proxy.
I am trying to update it and I my box without my concern want to
emerge xorg ( snip )
emerge -pvDu world returns:
[blocks B ] app-text/xpdf-3.01-r4 (is blocking app-text/poppler-0.5.0-r4)
[ebuild
thank you guys, problem solved !!!
On 2/14/06, Nagatoro [EMAIL PROTECTED] wrote:
Allan Spagnol Comar wrote:
Hi Gentoo-List, I am having a bit of a problem with my gentoo box
running as a gateway/proxy.
I am trying to update it and I my box without my concern want to
emerge xorg ( snip
I will try change the file and I got in touch about what happens
On 2/12/06, Harm Geerts [EMAIL PROTECTED] wrote:
On Monday 13 February 2006 03:26, Allan Spagnol Comar wrote:
Hi all,
I had installed lm_sensors and kernel modules, now when I run sensors
command I got:
monstro
Hi all, I am running my box on a AMD64 with an ATI X300 pci express video board.
I don´t know if here is the place to ask for it but my problem is with
the video board module distributed by ATI, when I use the module the
xorg works correctly but if I change to text mode I can not return to
I am using 2.6.15-r4, and 8.22.15 ati driver
can some thing with frame buffer ?
On 2/13/06, Iain Buchanan [EMAIL PROTECTED] wrote:
On Mon, 2006-02-13 at 12:09 -0300, Allan Spagnol Comar wrote:
Hi all, I am running my box on a AMD64 with an ATI X300 pci express video
board.
I don´t
Well it works, thanks !!!
On 2/13/06, Allan Spagnol Comar [EMAIL PROTECTED] wrote:
I will try change the file and I got in touch about what happens
On 2/12/06, Harm Geerts [EMAIL PROTECTED] wrote:
On Monday 13 February 2006 03:26, Allan Spagnol Comar wrote:
Hi all,
I had installed
Hi all,
I had installed lm_sensors and kernel modules, now when I run sensors
command I got:
monstro ~ # sensors
it8712-isa-0290
Adapter: ISA adapter
VCore 1: +1.41 V (min = +1.42 V, max = +1.57 V) ALARM
VCore 2: +0.00 V (min = +2.40 V, max = +2.61 V) ALARM
+3.3V: +6.53 V (min
Hi all, I am having a real strange problem on a fresh install, I had
used a stage3 tarball from internet and when I try to emerge syslog-ng
I got this error
checking for C compiler default output...configure: error: C compiler
cannot create executables
See config.log for more details.
I had a
thak you all. now I really understand what about PAM and LDAP.
On 1/13/06, John Jolet [EMAIL PROTECTED] wrote:
On Jan 13, 2006, at 2:37 PM, Jose Gonzalez Gomez wrote:
2006/1/13, John Jolet [EMAIL PROTECTED]:
On Jan 13, 2006, at 11:45 AM, Allan Spagnol Comar wrote:
thanks. I believe
Hi, I don´t know if this is a valid question, or I am making a big
mess, but I was wondering witch autentication method is better, ldap
or pam. I would like to know too if is possible to use bouth.
thanks.
--
An application asked:
Requeires Windows 9x, NT4 or better,
so I´ve installed Linux
--
thanks. I believe I am starting to understand this.
I was seeing that ldap can authenticate in a lot of types, like ,
databases, files, and PAM do some things like that too or am I
wrong ?
On 1/13/06, John Jolet [EMAIL PROTECTED] wrote:
On Jan 13, 2006, at 11:03 AM, Allan Spagnol Comar
Hi all, I am having a big trouble, I reboot my box after an update of
the kernel, then I see apache2 do not come up. try to startit by hand
and got
Syntax error on line 275 of /etc/apache2/httpd.conf:
Cannot load /usr/lib/apache2/modules/libphp4.so into server:
Hi all; I had upgraded my system and I can not make my php4 to work
with apache2.
it initializes mod_php but it can not open .php files. in
/etc/conf/apache2 the option -D PHP4 is setted
what more should I do ?
thanks, Allan
--
An application asked:
Requeires Windows 9x, NT4 or better,
browser tries to download .php file.
On 12/26/05, Robin [EMAIL PROTECTED] wrote:
Check this out.
http://gentoo-wiki.com/Apache_Modules_mod_php
It may help you..
As well exactly what error are you getting ?
On 12/26/05, Allan Spagnol Comar [EMAIL PROTECTED] wrote:
Hi all; I had
All that was on the link I had try to do. still same error.
On 12/26/05, Allan Spagnol Comar [EMAIL PROTECTED] wrote:
browser tries to download .php file.
On 12/26/05, Robin [EMAIL PROTECTED] wrote:
Check this out.
http://gentoo-wiki.com/Apache_Modules_mod_php
It may help you
thanks I will try google.
On 12/22/05, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
Allan Spagnol Comar [EMAIL PROTECTED] writes:
I was holping to find snacc ( that is a gnu tool for ASN.1 ) on
portage tree. How can I find this file on portage tree if it exists ?
Look at emege man page
I was holping to find snacc ( that is a gnu tool for ASN.1 ) on
portage tree. How can I find this file on portage tree if it exists ?
thanks, Allan
--
An application asked:
Requeires Windows 9x, NT4 or better,
so I´ve installed Linux
--
gentoo-user@gentoo.org mailing list
Where Do I do a bug report
I received this a moment ago when I run emerge --sync.
Updating Portage cache: 88%!!! Cannot resolve a virtual package
name to an ebuild.
!!! This is a bug, please report it. (virtual/x11-6.8)
don´t know where to post it
--
An application asked:
Requeires Windows
thanks All
On 12/20/05, Dale [EMAIL PROTECTED] wrote:
Allan Spagnol Comar wrote:
Where Do I do a bug report
I received this a moment ago when I run emerge --sync.
Updating Portage cache: 88%!!! Cannot resolve a virtual package
name to an ebuild.
!!! This is a bug, please report
thanks.
On 12/16/05, Paweł Madej [EMAIL PROTECTED] wrote:
Allan Spagnol Comar wrote:
Thanks all for the answers until now;
What i am looking for is to backup 3 servers, and a critical issue
workstation.
I think that you should test Bacula. that is very scalable app to backup
from
Hi list,
I am having a real strange problem on my gateway/firewall;
I am using it sharing internet with iptables. masquerating ips; from
all my internal network I can access internet; from my gateway I can
access the internal network, but when I try from the gateway reach
external network I
Good day Gentoo List !!!
Some one knows where I can find some good material about backuping linux boxes ?
thanks, Allan
--
An application asked:
Requeires Windows 9x, NT4 or better,
so I´ve installed Linux
--
gentoo-user@gentoo.org mailing list
Thanks all for the answers until now;
What i am looking for is to backup 3 servers, and a critical issue workstation.
I have a storage working with samba, so my bakups will go to this
samba server. I would like to make some diff bakups to save storage
space
:)
thanks again all of you
Hi gentoo list !!!
I am using iptables 1.2.11-r3 and iptables init.d script doesn´t do
it´s work; had run '/etc/init.d/iptables save' and 'rc-update add
iptables default' but, when the system boots it does not restore the
iptables rules some one could help me with that !!!
thanks, Allan
--
Hi I was pretending to emerge emacs to check dependencies and I got
amazed when I saw this:
# emerge -p emacs
[ebuild N] media-libs/giflib-4.1.4
[ebuild N] dev-libs/libIDL-0.8.6
[ebuild N] gnome-base/orbit-2.12.3
[ebuild N] gnome-base/libbonobo-2.10.1
[ebuild N]
cool; that solved the problem really well; I am changing my use flags
to -X -kde -gnome -motif so I got no more such problems, and I
thinking to rebuild my system
thanks alot again Erik.
On 12/1/05, Erik Haider Forsén [EMAIL PROTECTED] wrote:
Allan Spagnol Comar [EMAIL PROTECTED] writes
, you setup your own .in-addr.arpa files for the
192.169.0.0/16 subnets that you use.
On Mon, 14 Nov 2005, Allan Spagnol Comar wrote:
still the problem
[EMAIL PROTECTED] ~ $ host 210.200.1.230
Host 230.1.200.210.in-addr.arpa not found: 3(NXDOMAIN)
[EMAIL PROTECTED] ~ $ host 210.200.1.232
Hi all, is there a way to enable one user to control one service on
gentoo box ???
I am asking because I had an user that administrate a nagios system
and he needs to reload, restart, stop, start the system
thanks
--
An application asked:
Requeires Windows 9x, NT4 or better,
so I´ve
There is another way besides sudo ? to do that ? allowing some user to
change the runningscript
On 11/14/05, Allan Spagnol Comar [EMAIL PROTECTED] wrote:
Thanks, I am not using sudo at time, still think it got some security
issues but I will read some more material
On 11/14/05, Haim
Hi All, I am having a little problem with my DNS server; I using a DNS
server at 210.200.1.230;
when I do nslookup dnsserver.com.br it returns 210.200.1.230
when I try nslookup 192.168.0.2 it return ** server can't find
230.1.200.210.in-addr.arpa: NXDOMAIN
does someone have a clue about what is
still the problem
[EMAIL PROTECTED] ~ $ host 210.200.1.230
Host 230.1.200.210.in-addr.arpa not found: 3(NXDOMAIN)
[EMAIL PROTECTED] ~ $ host 210.200.1.232
232.1.200.210.in-addr.arpa domain name pointer shakan.commodity.com.br.
and seems to me that both shakan.eng.com.br and thewho.eng.com.br is
Thanks, I am not using sudo at time, still think it got some security
issues but I will read some more material
On 11/14/05, Haim Ashkenazi [EMAIL PROTECTED] wrote:
On Mon, 2005-11-14 at 07:50 -0300, Allan Spagnol Comar wrote:
Hi all, is there a way to enable one user to control one
#!/bin/sh
#
blah=`pwd`/blah
echo $blah
output:
/home/thor/tmp/blah
holpe it helps.
On 11/11/05, Peper [EMAIL PROTECTED] wrote:
Hello,
I have a var $blah=' `pwd`/blah ' (extra spaces for clearer reading), how can
i change it to 'output of pwd/blah' ?
--
Best Regards,
Peper
--
Hi all, I make a mistake and need some assistence now
I had copied my /bin, /sbin, /etc, /usr, /var, /home, /tmp to
partitions that wasn´t the originals so when I make the copie I do
not remember to use -p option and now almost nothing is working
because of permitions I do not have
Hi Jules; there is a lot of documentation about masked packages on
gentoo.wiki.com and on gentoo-handbook but if you want to unmask this
package you can edit the file /etc/portage/package.keywords and insert
the line
=media-sound/alsa-driver-1.0.10 ~x86
if x86 is your machine arch ...
good luck.
/logrotate.d/syslog-ng
app-admin/syslog-ng *
bunyip ~ #
so you just need to check the file is present, install logrotate and sit
back and watch it happen.
BillK
On Wed, 2005-10-26 at 07:58 +0200, Heinz Sporn wrote:
Am Dienstag, den 25.10.2005, 17:12 -0300 schrieb Allan Spagnol Comar:
Hi All
Hi All, I was looking for explanations about syslog-ng and got stucked
I was wondering why my /var/log/messages has 2.1 GB size and if I can
reduce this size or config it better; I am using default syslog-ng
config that was emerged by gentoo instalation.
Thanks, Allan
--
thank you all guys !!!
I understand now the complex resons to always have backups and test servers
I am sorry to make such a mess at the list, it wasn´t my intantion,
thank one more time for the attention that was spend on my trouble. I
promise that in the next time I will make some more
My hole linux box has crashed
I made a system update yesterday with emerge -Du world
it update my apache, mantis, nagios, bind, mysql. today my hole
system is against me
I think in reinstall the full system has any one got a better
idea, my backups are unavailable now
ok,
apache, mysql, nagios are seams to be running ok now.
mantis - cannot autenticate users.
bind - isn´t working, when i run nslookup it got connection refused
:(
revdeprebuild has fixed mysql .
On 10/21/05, Peter Gordon [EMAIL PROTECTED] wrote:
Allan Spagnol Comar said:
My hole linux
sorry for the lack of details, I got stunned by the upgrade I had
done it a lot before and never got such impact
one of my biggest problem now is the bind. it runs but isn´t
enabled to anyone ...
On 10/21/05, Allan Spagnol Comar [EMAIL PROTECTED] wrote:
ok,
apache, mysql, nagios
One more info, udev had crashed and I have to downgrade from 7.0 to
6.8-r1 to get the system to boot
On 10/21/05, Allan Spagnol Comar [EMAIL PROTECTED] wrote:
sorry for the lack of details, I got stunned by the upgrade I had
done it a lot before and never got such impact
one of my
Allan Spagnol Comar wrote:
My hole linux box has crashed
I made a system update yesterday with emerge -Du world
it update my apache, mantis, nagios, bind, mysql. today my hole
system is against me
I think in reinstall the full system has any one got a better
idea, my
Got my named to work. problem on listen-on removed now it works
On 10/21/05, Allan Spagnol Comar [EMAIL PROTECTED] wrote:
true, doc team help with mysql upgrade.
On 10/21/05, Roy Wright [EMAIL PROTECTED] wrote:
Boot off of LiveCD, chroot, start repairing...
When I've hosed my system
mantis now :(
when I try to log I got this error:
APPLICATION ERROR #401
Database query failed. Error received from database was #1054: Unknown
column 'lost_password_in_progress_count' in 'field list' for the
query: UPDATE mantis_user_table
SET lost_password_in_progress_count=0
WHERE id='3'
sorry by the way I put it Jeff I got to angry when All my services
stop working after an ( what should be simple ) update .
this update had stop all services I got on this box, that was an web
server for nagios and mantis, and dns server for private net the
database to nagios and
Hi all, I had a doubt, I got a power loss when emerging gcc
it was almost at final, when I do a emerge --resume, it beguns all
over again so my doubt is if there a way to continue compilation
from where it stops.
thanks, Allan
--
gentoo-user@gentoo.org mailing list
thank you all, this explanations is very usefull.
On 10/19/05, Glenn Enright [EMAIL PROTECTED] wrote:
On Wed, 19 Oct 2005 19:38, Allan Spagnol Comar wrote:
Hi all, I had a doubt, I got a power loss when emerging gcc
it was almost at final, when I do a emerge --resume, it beguns all
1 - 100 of 168 matches
Mail list logo
