I've been running a mobile A8 quad core with a 6000 series GPU for about a
year under 3.x kernels and open source x.org drivers. Not a hiccup.
On Jul 22, 2013 3:57 PM, Alexander Puchmayr alexander.puchm...@linznet.at
wrote:
Hi there,
I'm thinking of bying a quad-core cpu, preferably an amd
I personally have this setup running on Windows on my home network. XBMC
has uPNP built in which allows streaming to or from my home theater setup
from either my Android phone or another uPNP machine on my network. It's by
far yhe easiest solution I could come up with. Even lets me stream 1080p
There is absolutely no reason why you can't use the vanilla kernel. Go
right ahead.
On Dec 24, 2012 10:08 AM, Teodor Spæren teodor.s...@hotmail.com wrote:
Hello!
I am trying to install gentoo on an old armada m700. The specs that I
think is relevant for this problem is the clocking speed of
Sure, but wouldn't compression make write operations slower? And isn't he
looking for performance?
On Aug 14, 2012 1:14 PM, Pandu Poluan pa...@poluan.info wrote:
On Aug 14, 2012 11:42 PM, Helmut Jarausch jarau...@igpm.rwth-aachen.de
wrote:
On 08/14/2012 04:07:39 AM, Adam Carter wrote:
It would figure that some in the Linux community would consider a sub 1.0
release as the birthday of a project :). Start flame mail here:
it was luck
that I got through the upgrade last time.
So looks like I'll be getting a new motherboard.
Jason Weisberger
jbdu...@gmail.com
, 2012 at 1:10 AM, Michael Mol mike...@gmail.com wrote:
On Thu, Jan 5, 2012 at 12:57 AM, Jason Weisberger jbdu...@gmail.com wrote:
Well like i said earlier, it did work that way. The final test is doing it
in X with full drivers loaded again. Then i get to kick my 9800gt off a
cliff.
Well, keep
motherboard. If not,
it's probably my card. Whether it's the PCI-E slot or northbridge
taking a dump on the motherboard is irrelevant to me, I'll just get a
new board.
I'll know by the end of this week. I can update with which way it went.
--
Jason Weisberger
jbdu...@gmail.com
. And how could I test whether it was
the processor or RAM without any current replacement parts? What
tests usually show one over the other?
--
Jason Weisberger
jbdu...@gmail.com
I would instantly agree, but backing off the unlock and oc doesn't improve
the situation. I can try text console with the onboard graphics and see
what happens.
Yeah, it never occurred to me that even when i was in console compiling
stuff that i was using a 1280x1024 vesa or nouveau framebuffer each time.
That will be first thing when i get home.
On Jan 4, 2012 3:52 PM, Mark Knecht markkne...@gmail.com wrote:
On Wed, Jan 4, 2012 at 12:42 PM, Jason
Sorry for the delayed response on the result, but i decided to do a
makeopts -j1 while i was at it. Compile has been going on for two hours.
Shoot me :)
Oh yeah, I hear you on the head scratching, believe me.
Well so far on the built in card I have managed to compile chromium -j5,
which i couldn't do for the two weeks prior. Same build, so i know it
wasn't an upstream or ebuild problem. Damn.
Next step is to get X running again and do it one
that it's up and running, I'm recompiling chromium from inside
gnome 3 with -j5 and I'll report in tomorrow morning.
On Wed, Jan 4, 2012 at 8:52 PM, Dale rdalek1...@gmail.com wrote:
Jason Weisberger wrote:
Oh yeah, I hear you on the head scratching, believe me.
Well so far on the built in card I
Well like i said earlier, it did work that way. The final test is doing it
in X with full drivers loaded again. Then i get to kick my 9800gt off a
cliff.
Check to make sure the driver is compatible with your nv9x chipset. I'm
your xorg log it doesn't show that one as being supported.
On Jan 2, 2012 10:14 AM, . ivd...@gmail.com wrote:
Hi there!
I can't run Xorg with Nouveau.
I use gentoo-sources without proprietary BLOBs (gentoo-libre).
? Is there a piece of software I'm missing on
my system to enable the cancellation?
Thanks!
Jason Weisberger
--
Jason Weisberger
jbdu...@gmail.com
was done on the
ALSA or Pulseaudio level, so which driver(s) are being used for the
cards should be irrelevant. However, I could be wrong.
--
Jason Weisberger
jbdu...@gmail.com
How are you listening to the audio? Headphones, speakers, telephone?
I'm using speakers and an external usb microphone at the moment. As I
said, this same setup works perfectly in Windows 7. I'm sure that if I
were to connect a headset the issue would go away, but that still doesn't
explain
Can you hear yourself through the speakers when talking into the
microphone? If yes, that means you need to disable the loopback in
alsamixer.
Noise cancellation doesn't seem to work
at all.
Noise cancellation doesn't have anything to do with that. You're
thinking of echo cancellation.
Another option is to use a small USB sound device. My headphones came
with one, for example. They can be really nice for reducing electrical
noise in the capture channel, too.
They also occasionally crop up where you might not expect them. I
picked up an HP 'travel' USB hub some time back,
Still looks like loopback is active. Try to find a slider called
Capture in alsamixer and mute it. There might also be a setting called
input which can be set to i2c, i2s, mix, etc. Play with these. I had
the same problem with a Soundblaster Live 24-bit, and the problem was that
it was set
in there.
--
Jason Weisberger
jbdu...@gmail.com
Well I now have it all completely working and dumped my findings here:
http://en.gentoo-wiki.com/wiki/HOWTO_Gnome_3
Hopefully it helps the next person coming to Gnome 3 from a fresh install.
On Sat, Dec 3, 2011 at 12:10 PM, Jason Weisberger jbdu...@gmail.com wrote:
I was getting that error
with introspection in :3.
So I think I finally figured out all my problems, I'll get home
tonight after work and give it a try. Hopefully someone will Google
this list and find this helpful, if not confusing.
On Dec 3, 2011 10:50 AM, walt w41...@gmail.com wrote:
On 12/02/2011 07:37 PM, Jason Weisberger wrote
:
On 12/01/2011 06:13 PM, Jason Weisberger wrote:
From a fresh install, upgrading from Gnome 2.26, I'm trying to install
gnome 3.2.2, but getting nowhere fast.
I stopped using Gentoo back before slots became common, so maybe I'm
missing something as far as that goes.
jbdubbspc jbdubbs # emerge
-0500, Jason Weisberger wrote:
Removing pygobject didn't help that block for some reason Which
doesn't make sense And clutter isn't on my system.
Why would both of those packages be slotted as :2 if one isn't on my
system and I only have one instance of pygobject?
Run emerge
scheduled for merge)
(x11-themes/gnome-icon-theme-3.0.0::gentoo, installed) pulled in by
(no parents that aren't satisfied by other packages in this slot)
Insert hand in shape of gun up mouth, pull imaginary trigger (thumb)
On Fri, Dec 2, 2011 at 9:09 PM, Jason Weisberger jbdu...@gmail.com
introspection block so I can install it?
On Fri, Dec 2, 2011 at 10:15 PM, Jason Weisberger jbdu...@gmail.com wrote:
Ok, worked through some of it, but pretty badly.
pygobject:2 needs -introspection to be able to slot :2 and :3 on the same
system. Ok done. However gnome 3's fallback mode gnome
From a fresh install, upgrading from Gnome 2.26, I'm trying to install
gnome 3.2.2, but getting nowhere fast. I stopped using Gentoo back before
slots became common, so maybe I'm missing something as far as that goes.
Thanks in advance guys/gals!
Jason Weisberger
jbdubbspc jbdubbs # emerge -pv
Correction, Gnome 3.2.1
--
Jason Weisberger
jbdu...@gmail.com
I've had mine for a while now, so I wouldn't be surprised if 1.5 was the
correct voltage for your sticks. Double check the manufacturer's website to
be sure.
On Feb 28, 2011 2:06 AM, Dale rdalek1...@gmail.com wrote:
Jason Weisberger wrote:
I actually have 4 gigs of gskill DDR 3 1600 and from
I actually have 4 gigs of gskill DDR 3 1600 and from experience I can tell
you that the stock voltage on those chips is set too low. The company
actually recommends that you use 1.9 volts while most motherboards will
default to 1.5 or 1.6. Double check this however, because I know they were
As he said in the previous message, there are almost never changelogs for
microcode updates.
I do, however, have to disagree with *never* disabling microcode updates.
If I recall properly, the AMD Phenom II 720 was able to be unlocked to 4
cores via a misconfiguration that enabled it with ACC.
...@googlemail.com
wrote:
On Monday 17 January 2011 15:13:54 Jason Weisberger wrote:
As he said in the previous message, there are almost never changelogs for
microcode updates.
I do, however, have to disagree with *never* disabling microcode updates.
If I recall properly, the AMD Phenom II 720
I second that. Gentoo probably isn't working because you have a custom
pppoe networking configuration. The others are built with a standard dhcp
configuration. Wipe your custom stuff and all will be well.
On Dec 16, 2010 6:29 PM, Paul Hartman
Couple of things to note:
The geforce 210 is not even powerful enough to do 1080p blueray playback.
Might want to consider a minor upgrade if you are going to do anything
entertainment-wise on this system.
Consider doing the ddr 3 system for longevity. If you do end up getting the
ddr 2
From what I see, update newuse deep world is NOT pulling it back in. That's
the bug.
On May 17, 2009 6:26 PM, Daniel Pielmeier daniel.pielme...@googlemail.com
wrote:
Daniel Iliev schrieb am 18.05.2009 00:16:
Hi,Would anybody, please, confirm the following behavior before I
file a report
You should have two different ethernet ports on that motherboard, the
primary one should use forcedeth, the secondary should use the new marvell
yukon phy driver, make sure those are compiled into your running kernel.
On Mar 18, 2009 2:41 PM, Neil Bothwick n...@digimed.co.uk wrote:
On Wed, 18
An interesting project that has come up is called Crossover Chromium, which
is a specially packaged version of Chrome and Wine, but yeah in the meantime
Konqueror does a pretty good job even if it does render slightly differently
on my system.
On Feb 14, 2009 11:11 PM, Joshua Murphy
not just have to recompile your kernel, but your entire system with
the new cflags for it to work interchangeably.
Jason Weisberger
On 2/5/07, Daevid Vincent [EMAIL PROTECTED] wrote:
I have a VMWare Workstation image of Gentoo Linux that I transfer between
my
desktop and my notebook (for LAMP
case, under Audio, Output Plugin Preferences for either of these
plugins will let you select a card arbitrarily.
-Daniel
*This .sig left intentionally blank*
--
gentoo-user@gentoo.org mailing list
--
Jason Weisberger
[EMAIL PROTECTED]
the w4l installer.On 11/5/06,
Michael Sullivan [EMAIL PROTECTED] wrote:
Does anybody know what happened to Win4Lin in portage?The packageitself seems to be masked, and sys-kernel/win4lin-sources is completelygone...--gentoo-user@gentoo.org
mailing list-- Jason Weisberger[EMAIL PROTECTED]
it out.
On 11/2/06, oskar kapala [EMAIL PROTECTED] wrote:
Jason Weisberger wrote: The composite extension is not necessary for AIGLX or XGL.Leaving it disabled is fine.Follow the directions at http://gentoo-wiki.com/HOWTO_AIGLX
for more information.Thanks,Actually I did follow that howto. Well, after
drivers don't support dri for r400 chipsetsi.e. aiglx doesn't work for the xpress 200m :(i've read somewhere that xorg is working on dri for r300 r400 chipsets. we have to be patient.
best regards robert--gentoo-user@gentoo.org mailing list-- Jason Weisberger
[EMAIL PROTECTED]
Kasthuriarachchi [EMAIL PROTECTED] wrote:
Dear all,I jest install the Gentoo using 2006.1 with genkernel, i'm using usb mouse. but mouse is moving very slowly. when i'm execute programms using keybord. that software working fast. but mouse moving horrible. please help me one this matter.
ThanksSuranga
-- Jason
+ scroller mouse wasn't detected too. So I copied my old xorg.conf. I really think xorg configuration should be more user friendly. Woking X
is crucial for not getting newbies scared. ;-)-- Jason Weisberger[EMAIL PROTECTED]
or two :)Thanks!-- Jason Weisberger[EMAIL PROTECTED]
Martins,The problem just seemed to disappear I did a few kernel upgrades since this thread, and it never seemed to kick in again. I've also switched to reiser 4, but that was recently, so I guess I'm not really sure where the problem was. I'm still using ck sources without problems now.
Jason
my workaround to this point.
Any ideas?-- Jason Weisberger[EMAIL PROTECTED]
Emulate3ButtonsnoEndSectionThanks a lot for all of the responses :-)jules--
gentoo-user@gentoo.org mailing list-- Jason Weisberger[EMAIL PROTECTED]
You'll need to use the usb-audio driver either from the alsa-drivers package or the kernel you're running. For complete instructions including how to set up your system for multiple sound devices, visit
http://gentoo-wiki.com/HOWTO_ALSA_Complete_%28includes_dmix%29Jason Weisberger[EMAIL
), the next time I try to boot to it, it'll be fine. Then it seems it'll do it all over again completely at random. Ideas?-- Jason Weisberger
[EMAIL PROTECTED]
PROTECTED] wrote:
Jason Weisberger wrote: Odd problemit seems as if almost completely at random, my boot process will stop at Mounting Local Filesystems.. for no reason.It will freeze there until you restart the computer.If
I boot a Live CD and mount the volume or run an fsck.ext3 on it (which
that correct for my M-Audio Delta 1010 sound card?--Phil SextonMy Home Page:
http://fancypiper.info/Free tunes: ftp://fancypiper.info/Naomi's Fancy: http://www.naomisfancy.net/Our 2nd CD:
http://www.cdbaby.com/naomisfancy/--gentoo-user@gentoo.org mailing list-- Jason Weisberger
[EMAIL PROTECTED]
:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200](rev a1)Which Driver would I choose for this nvidia card?
James--gentoo-user@gentoo.org mailing list-- Jason Weisberger
[EMAIL PROTECTED]
I believe that missing keyword stuff can be unmasked if you put x11-libs/libdrm - in your package.keywords. This is just a guess, but I think it should work. This isn't a fix, you should probably file a bugzilla report on it, as nothing in the package database should be without a keyword.
-- Jason
Well, the back/forward buttons on my logitech mx700 don't work, but that's a relatively minor thing. Those mouse buttons will work fine with a little configuration:
http://www.gentoo-wiki.com/HOWTO_Advanced_Mouse-- Jason Weisberger[EMAIL PROTECTED]
Bo,Gotcha, I didn't realize it was an overlay. Thanks for the input.On 7/1/06, Bo Ørsted Andresen [EMAIL PROTECTED]
wrote:On Saturday 01 July 2006 17:32, Jason Weisberger wrote: I believe that missing keyword stuff can be unmasked if you put
x11-libs/libdrm - in your package.keywords
if it isunstable or if it has
bugs. Please, help me.--Best regards,Daniel--gentoo-user@gentoo.org mailing list-- Jason Weisberger
[EMAIL PROTECTED]
spending hours taking minutes-- Jason Weisberger[EMAIL PROTECTED]
4?Thanks for the help.Sorry my rig was such a pest.It happens.Dale:-):-)--
gentoo-user@gentoo.org mailing list-- Jason Weisberger[EMAIL PROTECTED]
]localhost jbdubbs # /usr/kde/3.5/bin/kdedFATAL: DCOP communication problem!
AbortedSo problem still exists.On 6/27/06, Martins Steinbergs [EMAIL PROTECTED] wrote:
On Tuesday 27 June 2006 06:31, Teresa and Dale wrote: Jason Weisberger wrote: List, Here's a new one.I ended up hard booting my system
Martins,My bad, it did work perfect after I restarted KDE and X. Thanks for all your help!-- Jason Weisberger[EMAIL PROTECTED]
an error:KDE Media Manager not running!I guess there's something wrong with dcop, but I can't figure out what to do about it. I'm sure that people who keep beer FAR away from keyboards like smart people would know what to do :)
-- Jason Weisberger[EMAIL PROTECTED]
.
Mike
--
Jason Weisberger
[EMAIL PROTECTED]
--
gentoo-user@gentoo.org mailing list
' 'configure' 'make' kde.eclass, line 295: Called die!!! died running emake, kde_src_compile:makeAnybody else seen this yet? Let me know if you have any ideas and if I should file a bug.
-- Jason Weisberger[EMAIL PROTECTED]
to revert back to my 3.4.5 gcc and re-emerge
system after having too many errors to warrant continuing.
Maybe I'll check back in a while, or if someone has a solution, I'd be
more than willing to listen.
--
Jason Weisberger
[EMAIL PROTECTED]
--
gentoo-user@gentoo.org mailing list
and bring this thread up again.
Thanks to everyone who responded!
--
Jason Weisberger
[EMAIL PROTECTED]
--
gentoo-user@gentoo.org mailing list
Yeah you can delete the contents of that folder no problem. It's just the leftover compiles and source, probably taking up gigabytes of space.-- Jason Weisberger
[EMAIL PROTECTED]
The official way to get around this is to install the latest VMWare any-any update. Google should find it easily.-- Jason Weisberger[EMAIL PROTECTED]
hardware mixing.On 5/22/06, Luigi Pinna
[EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-Hash: SHA1Alle 04:25, lunedì 22 maggio 2006, Jason Weisberger ha scritto: There could be a couple of things causing this.Do you have ALSA's OSS Emulation properly configured.If you do, you should
This may be a stupid question, but is your USB support enabled in your kernel? Certain types of support are not enabled by default. If you like, send your laptop model and make so I can see which type you'll need to compile in.
Also, I assume you're using UDEV?-- Jason Weisberger[EMAIL PROTECTED]
There could be a couple of things causing this. Do you have ALSA's OSS Emulation properly configured. If you do, you should be able to hear sound when you #echo /dev/rand /dev/dsp . If /dev/dsp isn't working, please refer to the Gentoo Wiki article on setting up ALSA properly for OSS Emulation.
?
___Novo Yahoo! Messenger com voz: Instale agora e faça ligações de graça.http://br.messenger.yahoo.com/--
gentoo-user@gentoo.org mailing list-- Jason Weisberger[EMAIL PROTECTED]
the sound card audigy se with gentoo?
--Roberto ZandonatiGPG-Fingerprint: 577F CC47 AAD7 A5B9 12D7F10D 89F8 3BA6 5CA8 58D5GPG-Keynumber: 0x5CA858D5--gentoo-user@gentoo.org mailing list
-- Jason Weisberger[EMAIL PROTECTED]
+++ D+ G e* h- !r !y= END GCv3.12 --gentoo-user@gentoo.org
mailing list-- Jason Weisberger[EMAIL PROTECTED]
with skype and
gentoo :)If I can get it working properly that'd be one less reason to use windows :)-Thufir--gentoo-user@gentoo.org mailing list
-- Jason Weisberger[EMAIL PROTECTED]
!!! (no error message)
!!! If you need support, post the topmost build error, NOT this status message.
This is preventing me from doing a full upgrade. Any ideas?-- Jason Weisberger[EMAIL PROTECTED]
Weisberger [EMAIL PROTECTED]
wrote:This is preventing me from doing a full upgrade. Any ideas?Please post the output of:emerge --infoemerge -pv dev-libs/apr-Richard--
gentoo-user@gentoo.org mailing list-- Jason Weisberger[EMAIL PROTECTED]
config, and none of them map properly to the forward and back thumb buttons like they used to on my MX1000 or my G5.
If you have Buttons 8 in xorg.conf, it won't run without a 12 button config..odd, eh?Ideas?-- Jason Weisberger[EMAIL PROTECTED]
), but surely any work on the directx backend will have some effect
on things like draw speed and rendering. So there's hope from that endas well.In any case, hope this helps to some extent.Holly--gentoo-user@gentoo.org
mailing list-- Jason Weisberger[EMAIL PROTECTED]
to be found!! yet the sound does not work, i thinkit is more of a curse, so i will subscribe to the exorcism mailinglist, anyway i will continue to hear your suggestions of course :P
Thanks anywaysoundless Rafa--gentoo-user@gentoo.org mailing list-- Jason Weisberger
[EMAIL PROTECTED]
bad.--gentoo-user@gentoo.org
mailing list-- Jason Weisberger[EMAIL PROTECTED]
, and before, with Win2k, we did nothave this problem.Does anyone have any suggestions or ideas?Much appreciated,Thank you,Matt--Matt Garmanemail at:
http://raw-sewage.net/index.php?file=email--gentoo-user@gentoo.org mailing list
-- Jason Weisberger[EMAIL PROTECTED]
85 matches
Mail list logo