Very well done, reminded me of some code that I wrote (poorly, I might add)
but, I dug it up and found some changes that you might be able to implement
instead of lines and lines of static configs. That being said, take some
of these changes into consideration.
Dynamic detection of drives and
...@stellar.eclipse.co.ukwrote:
On 12/1/2011, at 10:47pm, Kaddeh wrote:
...
First, addressing the SQL issue and why I think that that could be one of
the causes. The entire site, for the most part is all in one giant DB
(~9GB) a significant part of that is a 3gb table full of raw image data
(yes
yes, but that should have an effect on swap space.
Cheers
Kad
On Thu, Jan 13, 2011 at 11:56 AM, Bill Longman bill.long...@gmail.comwrote:
On 01/13/2011 09:59 AM, Kaddeh wrote:
I have a standard 2x RAM swap size of 4gb.
The problem that I am seeing though is that the applications (MySQL
So, I have run into an interesting problem while building out a web server
for a client which I haven't come across before and I was hoping that the
list would be a good way for me to find the answer.
A little beckground on the systems:
P4 @ 3.0Ghz
2GB PC2 4200
2x 250GB drives in RAID1
The
caching hteroy just comes up because I can clear the cached memory
down to 14mb cached using 'sync echo 3 /proc/sys/vm/dump_cache'
Cheers
Kad
On Wed, Jan 12, 2011 at 1:37 PM, Jarry mr.ja...@gmail.com wrote:
On 12. 1. 2011 19:59, Kaddeh wrote:
P4 @ 3.0Ghz
2GB PC2 4200
2x 250GB drives
:47 PM, Kaddeh kad...@gmail.com wrote:
Jarry,
Thanks for the monitoring advice, I am checking out monit right now.
In terms of what is the root cause of the issue, I have narrowed it down
to
either write caching of a SQL cache issue.
First, addressing the SQL issue and why I think
or...
you could run slaptest and get some failure output.
I noticed that my slapd was having issues too, I managed to track it down to
a bdb version mismatch
miniroute ~ # slaptest
bdb_back_initialize: BDB library version mismatch: expected Berkeley DB
4.8.26: (2010-03-14), got Berkeley DB
what is the output of eselect python list
On Thu, May 20, 2010 at 11:43 AM, Rene Lopez Montelongo
r...@redes.acatlan.unam.mx wrote:
Hi everyone
I'm trying to install on a sparc architecture SUN Ultra45.
At the time to install a new slot of python I got the this error...
livecd elog #
Are you doing a full recursive copy of / from rootfs for sdd7 (aka cp -r /)
if so, are the other partitions mounted as well?
Cheers
Kad
On Thu, May 13, 2010 at 6:51 PM, Iain Buchanan iai...@netspace.net.auwrote:
Hi,
I have two 160Gb drives, one internal and one USB. I've partitioned
them
have you tried emergeing x11-drivers/xf86-input-evdev and
x11-drivers/xf86-input-mouse on their own without xorg?
Cheers
Kad
On Mon, May 10, 2010 at 9:59 PM, Kevin O'Gorman kogor...@gmail.com wrote:
About a week ago, my Gentoo box was in a bad state where there were some
packages that would
Have you tried setting LINGUAS=fr in your make.conf?
On Fri, Apr 2, 2010 at 2:58 PM, Roger Cahn rc...@club-internet.fr wrote:
Hi all,
Yesterday I gave a presentation with OOo-3.2 Impress
with my laptop (xfce4, thunar).
I used a video projector Dell, which worked fine.
However, this made my
do you have VIDEO_CARDS set in your make.conf?
On Fri, Mar 26, 2010 at 8:18 AM, 7v5w7go9ub0o 7v5w7go9u...@gmail.comwrote:
I'd like to compile ffmpeg with vdpau - direct NVidia hardware
acceleration. This is a configuration flag for ffmpeg.
Setting the vdpau use flag seems to set the
Looks like the jpeg use flag is ok to use according to bug #283089 [
http://bugs.gentoo.org/show_bug.cgi?id=283089]
It looks like it is waiting for the thumbs-up from everyone to be taken out.
I have been running with the jpeg use flag unmasked for a while and haven't
seen any issues.
Cheers
Kad
Walter,
I'd advise going back through and running a make menuconfig on
2.6.31-r6/10 and verify that everything is in order.
The reason that I say this is that, in the event that your kernel -DID-
revert back to defaults, if you have a non-ext2/3 partition, it isn't going
t recognize it (EXT4,
have you tried terminal, xterm, aterm, etc?
On Mon, Mar 8, 2010 at 3:01 PM, dhk dhk...@optonline.net wrote:
Is it possible to embed a terminal window in a gtk window?
I want to be able to run a text program as usual, but have it wrapped in
the GTK window so I can scroll output and other
Check out http://bugs.gentoo.org/show_bug.cgi?id=304265 and then update to
2.6.32-r5
Cheers
Kad
On Wed, Feb 10, 2010 at 11:24 PM, Iain Buchanan iai...@netspace.net.auwrote:
Hi collective,
I just upgraded from linux-2.6.32-tuxonice-r1 to r4 and my network card
no longer works. It is
try emerge =media-gfx/imagemagick-6.4.7.0
On Tue, Feb 9, 2010 at 8:45 AM, Laurent Kappler laur...@logiquefloue.orgwrote:
Hi,
I'm tryin to emerge ImageMagick version 6.4.7.0 while current in portage is
6.5.7.
How could I do that??
thanks
Laurent
17 matches
Mail list logo