Thank you!
I'm giving a look to the links: I'll let you know the results!
Best regards,
Massimiliano Ziccardi
On Tue, Jun 5, 2012 at 4:28 PM, Michael Mol mike...@gmail.com wrote:
On Tue, Jun 5, 2012 at 9:54 AM, Massimiliano Ziccardi
massimiliano.zicca...@gmail.com wrote:
Hi all
Hi All.
This problem is not strictly related to gentoo, however I'm sure someone
here will be able to help me in some way: sorry if I bother you!
I'm having a really strange problem: for some reason, everytime I reboot my
server, the default gateway gets attached to the 'lo' interface, even if I
distribution is CENTOS but couldn't get much help there, so I tried here.
Thanks a lot!
Massimiliano
On Mon, Nov 7, 2011 at 12:24, J. Roeleveld jo...@antarean.org wrote:
On Mon, November 7, 2011 12:13 pm, Massimiliano Ziccardi wrote:
Hi All.
This problem is not strictly related to gentoo, however
as if it was a loopback address).
Thanks,
Massimiliano
On Mon, Nov 7, 2011 at 12:52, Michael Schreckenbauer grim...@gmx.de wrote:
Hi,
Am Montag, 7. November 2011, 12:13:58 schrieb Massimiliano Ziccardi:
Hi All.
This problem is not strictly related to gentoo, however I'm sure someone
here will be able
Please do NOT top-post
Sorry.
If asking questions on how to do things on non-Gentoo installations,
please always mention the distribution in your email.
Ok, sorry again!
What about the documentation?
I have noticed that most binary distros require the use of their graphical
admin tools
Hi All.
The routes and ifconfig seems correct to me.
How is the router configured?
I specifically mean, does it have any firewall configurations redirecting
SSH-traffic to your machine?
I don't have access to the routers, however they are used for many other
servers too.
Moreover, I tried the
you have those link-local entries in your routes (169.254.0.0/16), Try
adding
NOZEROCONF= yes to /etc/sysconfig/network
Already tried, but no luck...
Thanks,
Massimiliano
could you post the output of
ip route
with zeroconf disabled?
Here it is!
192.168.19.0/24 dev eth2 proto kernel scope link src 192.168.19.95
195.75.145.0/24 dev eth0 proto kernel scope link src 195.75.145.122
default via 195.75.145.1 dev eth0
Thanks,
Massimiliano
seems to be a really tricky one...
What does
tracepath 195.75.145.33
give?
Here is the output:
1: 195.75.145.33 (195.75.145.33) 0.074ms pmtu
16436
1: 195.75.145.33 (195.75.145.33) 0.039ms reached
1: 195.75.145.33 (195.75.145.33)
, 2011 at 14:59, Pandu Poluan pa...@poluan.info wrote:
On Nov 7, 2011 8:38 PM, Massimiliano Ziccardi
massimiliano.zicca...@gmail.com wrote:
seems to be a really tricky one...
What does
tracepath 195.75.145.33
give?
Here is the output:
1: 195.75.145.33 (195.75.145.33
Our network admin told me to create a lo:0 to that address to create a VIP
to be balanced by the network load balancer.
That is why lo:0 is there...
Thanks!
Regards,
Massimiliano Ziccardi
On Mon, Nov 7, 2011 at 15:01, Michael Schreckenbauer grim...@gmx.de wrote:
Am Montag, 7. November 2011
src
127.0.0.1
Regards,
Massimiliano
On Mon, Nov 7, 2011 at 14:59, Pandu Poluan pa...@poluan.info wrote:
On Nov 7, 2011 8:38 PM, Massimiliano Ziccardi
massimiliano.zicca...@gmail.com wrote:
seems to be a really tricky one...
What does
tracepath 195.75.145.33
give?
Here
Maybe I found where the problem is!
Shutting down lo:0 everything seems to work properly!
However I need to configure lo:0 for local triangulation (balancing through
RADWARE): how should I configure it to not conflict with the other network
cards?
Thanks!
Massimiliano Ziccardi
try assigning a netmask of 255.255.255.255 to it.
Seems to work!
I'm asking to the network administrators if 255.255.255.255 is ok !
I'll let you know!
Thank you all! Gentoo's mailing list il always the best one!
Thanks!
they told me 255.255.255.255 is ok
I really thank you all very much for your support!
Regards,
Massimiliano
On Mon, Nov 7, 2011 at 15:48, Massimiliano Ziccardi
massimiliano.zicca...@gmail.com wrote:
try assigning a netmask of 255.255.255.255 to it.
Seems to work!
I'm asking
that reduces my
needs to bother you here!
Thank you all! You are just great!
(can't say the same of other distribution's mailing lists )
Massimiliano
On Tue, Aug 17, 2010 at 12:21 PM, Jake Moe jakesaddr...@gmail.com wrote:
On 08/16/10 19:47, Massimiliano Ziccardi wrote:
Some new people think
:
# equery belongs /usr/lib/libxfce4util.la
[ Searching for file(s) /usr/lib/libxfce4util.la in *... ]
#
On Sat, Aug 14, 2010 at 3:26 AM, Jake Moe jakesaddr...@gmail.com wrote:
On 08/13/10 23:50, Alex Schuster wrote:
Massimiliano Ziccardi writes:
I'm trying to update my gentoo after a long time
2010 09:13:29 Dale wrote:
Massimiliano Ziccardi wrote:
# equery belongs /usr/lib/libxfce4util.lahttp://libxfce4util.la
[ Searching for file(s) /usr/lib/libxfce4util.la
http://libxfce4util.la in *... ]
#
Equery doesn't give any results because it is not installed.
If it weren't
Hi all!
I'm trying to update my gentoo after a long time.
I tried the update (emerge -uD world) but I got some problem about
conflicting and missing libraries, so I've uninstalled some software.
After that, I ran an revdep-rebuild, but it do not works.
When it tries to emerge xfce4-panel it
Hi all!
Lately I can't login anymore to my GENTOO pc through KDM (ssh login works).
I tried to look inside the kdm.log file, but could not see any useful
message.
Could someone point me to where to look to find some information?
Thanks a lot,
Massimiliano
One more info you could find useful.
Yesterday update world did work.
Today, I've enabled the ffmpeg flag and launched an update world,
getting the error
Thanks,
Massimiliano
On Tue, Nov 10, 2009 at 3:31 PM, Massimiliano Ziccardi
massimiliano.zicca...@gmail.com wrote:
Hi all!
Sorry
Massimiliano Ziccardi wrote:
Hi all!
Sorry to bother you again : it was a long time!
I've again one problem I'm not sure I can easily solve...
Today, I did:
emerge -upD --newuse world
but I got an error:
These are the packages that would be merged, in reverse order:
Calculating dependencies
Hi All!! Long time since last time I bothered you all! ;-)
I googled around and found many people having my same problem, but could not
find any solution.
Sudo works just great on my machine, while kdesu always says 'Bad password'.
Have you any idea about what I can check to fix such issue?
wrote:
On Montag 05 Oktober 2009, Massimiliano Ziccardi wrote:
Hi All!! Long time since last time I bothered you all! ;-)
I googled around and found many people having my same problem, but could
not find any solution.
Sudo works just great on my machine, while kdesu always says 'Bad
Hi all!
I'm here again, sorry!
I'm configuring my gentoo linux so that it authenticates inside a windows
domain.
I was configuring PAM, when I found the pam_winbind.so file was not inside
/lib/security.
I tried reading many documentation, but couldn't find a way to find wich
package I should
Thank you all. I was missing the pam flag (I was sure it was there, sorry!)
However, the pfl package is masked... Do you think it would be a good idea
to unmask it?
Or, are there other tools than efile?
Thanks,
Massimiliano
Hi all.
Thanks to your support, I think I got a little bit of knowledge of how
emerge works, so I started cleaning my USE flags (I had lot of useless
stuff...).
To perform such cleaning, I started with USE=-* and than added everything I
needed.
It hasn't been very hard (but quite long :-) )to
Thank you Volker, thank you Walt!
It seems that adding the xulrunner flag was the right way to go.
However
euse -i xulrunner
says
'Build native browser integration against xulrunner instead of firefox or
seamonkey'
So.. do I really need xulrunner? I think seamonkey is enought for me...
To
As Jocob says, I don't use genkernel
Do you think I should reopen the bug?
Thanks,
Massimiliano
On Fri, Sep 11, 2009 at 7:31 PM, Jacob Todd jaketodd...@gmail.com wrote:
On Fri, Sep 11, 2009 at 12:23:23PM -0700, walt wrote:
On 09/11/2009 08:58 AM, Massimiliano Ziccardi wrote:
Hi all
Hi all.
I'm trying to apply the workaround suggested in the BUG at
http://bugs.gentoo.org/show_bug.cgi?id=268285
I've changed the file accordingly, however, everytime I emerge mkinitrd, the
file (obviously) get overwritten.
I tried to search, but didn't find anything...
Is there an emerge flag
Thank you! That worked!!!
Massimiliano
On Mon, Sep 14, 2009 at 1:58 PM, Alex Schuster wo...@wonkology.org wrote:
Massimiliano Ziccardi writes:
I'm trying to apply the workaround suggested in the BUG at
http://bugs.gentoo.org/show_bug.cgi?id=268285
I've changed the file accordingly
Hi all.
I've a problem trying to emerge mkinitrd.
Everytime I try, I get:
* ERROR: sys-apps/mkinitrd-3.5.7-r3 failed.
* Call stack:
* ebuild.sh, line 49: Called src_compile
* environment, line 2212: Called die
* The specific snippet of code:
* emake ||
Hi all (sorry to bother you again!!)
I'm still in the middle of the process of updating to KDE4
Now the update blocks with and svn error:
* The die message:
* subversion: can't fetch to
/usr/portage/distfiles/svn-src/eselect-python/trunk from
September 2009 11:22:31 Massimiliano Ziccardi wrote:
Hi all (sorry to bother you again!!)
I'm still in the middle of the process of updating to KDE4
Now the update blocks with and svn error:
* The die message:
* subversion: can't fetch to
/usr/portage/distfiles/svn-src/eselect
Well..
as a gentoo newbie, I can say autounmask made my life much easier.
Of course the error has been mine: I should have used the 'pretend' switch
and look closer to the list...
However, I don't think I would have noticed much: don't blame me, but many
emerge aspects are still alien beasts to
I have exactly the same problem:
I tried everything (well, everything I'm aware of :-) ) but I always get:
[blocks B ] net-wireless/bluez (net-wireless/bluez is blocking
net-wireless/bluez-libs-3.36)
[blocks B ] net-wireless/bluez-libs (net-wireless/bluez-libs is
blocking
Already done
localhost ~ # emerge --search bluez | egrep bluez|installed | egrep -v
Homepage|Description
[ Results for search key : bluez ]
* dev-python/pybluez
Latest version installed: [ Not Installed ]
* net-wireless/bluez
Latest version installed: [ Not Installed ]
*
equery d bluez did not return anything...
localhost ~ # equery d bluez
[ Searching for packages depending on bluez... ]
localhost ~ #
Any other idea?
Thank you!!
Thank you people!!
I'm trying Alan's tip. I'll let you know when I'll finish : it must perform
26 compilations :-( )
Just one question : how did you notice the problem was kdesu? I didn't see
any
dependency from bluez...
Thanks,
Massimiliano
Yep, sorry.
Same question : how did you notice the problem was gksu? I didn't notice any
dependency from bluez...
(I'd like to be able to solve these problems without bother you)
Thanks,
Massimiliano
Thanks a lot!
Massimiliano
Hmmm.. It seems that uninstalling firefox did solve the problem
Thank you all!!
Today you teched me a lot of things about gentoo!!!
Thank you,
Massimiliano
McKinnon wrote:
On Tuesday 08 September 2009 14:14:27 Volker Armin Hemmann wrote:
On Dienstag 08 September 2009, Massimiliano Ziccardi wrote:
equery d bluez did not return anything...
localhost ~ # equery d bluez
[ Searching for packages depending on bluez
hmm... an emerge-webrsync seems to have solved it
Thank you a lot!!!
On 9/8/09, Massimiliano Ziccardi massimiliano.zicca...@gmail.com wrote:
I hate this Now I get this error:
Calculating dependencies... done!
Verifying ebuild manifests
!!! Digest verification failed:
!!! /usr
on this way.
Thanks,
Massimiliano
On Tue, Sep 8, 2009 at 5:53 PM, Alan McKinnon alan.mckin...@gmail.comwrote:
On Tuesday 08 September 2009 17:42:26 Massimiliano Ziccardi wrote:
Hi Alan... Thank you... No, I don't want gnome at all...
Is a 'set USE=-gnome' enough?
No. Doing
Hi Alan... Thank you... No, I don't want gnome at all...
Is a 'set USE=-gnome' enough?
Thanks,
Massimiliano
Hi all.
Reading http://www.gentoo.org/proj/en/desktop/kde/kde4-guide.xml#kde_portage
I found the following sentence:
8x--
KDE 4 is the current KDE version supported by upstream.
8x--
However, if I try to install KDE 4.2, it says KDE 4.2 is masked...
Is it right? Do I have to unmask it
, gentoo community is the best!
Thanks!
---
Massimiliano
On Fri, Aug 28, 2009 at 4:16 PM, Dale rdalek1...@gmail.com wrote:
Massimiliano Ziccardi wrote:
Hi all.
Reading
http://www.gentoo.org/proj/en/desktop/kde/kde4-guide.xml#kde_portage
I found the following sentence:
8x
Hi Ben. Thank you too!
Duncan brought it up out of concern that KDE3 may be masked before KDE4 is
marked arch stable, and wanted to the let the AMD64 community know.
That's not very nice. I can't update to KDE4 'couse it's not ready stable
enough, but KDE3 could get maskedIt's seems like I'm
Instead of Gnome consider something like XFCE
Already tried some time ago but, for some weird reason, it gave me lots of
problems...
I also like fluxbox but it's probably too minimal for a committed KDE user.
That's not a problem: I've used TWM, MWM and WindowMaker for quite long time
too :-)
Hi all.
This is the output of dmesg | grep iwl
xxx ~ # dmesg | grep iwl
[1.906142] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux,
1.3.27ks
[1.906249] iwlagn: Copyright(c) 2003-2008 Intel Corporation
[1.906361] iwlagn :03:00.0: PCI INT A - GSI 17 (level, low) - IRQ
17
[
Thank you Alan!
Works!!
On Tue, Aug 25, 2009 at 10:10 AM, Alan McKinnon alan.mckin...@gmail.comwrote:
On Tuesday 25 August 2009 09:48:34 Massimiliano Ziccardi wrote:
Hi all.
This is the output of dmesg | grep iwl
xxx ~ # dmesg | grep iwl
[1.906142] iwlagn: Intel(R) Wireless WiFi
Thank you Alan.
Just as an information, if it happens to something else:
I've installed successfully the split ebuilds.
However, after the upgrade, I had to disable UXA: with UXA Xorg didn't even
start (it crashes).
However (as glxgears says), FPS jumped from 500 to 1300...
Thank you all,
Hi all!!
I tried today :
emerge --update --deep world
but I get the following error:
[blocks B ] kde-base/kdebase (kde-base/kdebase is blocking
kde-base/kdelibs-3.5.10-r6)
I'm not very expert about emerge, have you any idea about this error?
Can I solve it in some way? (Please, don't ask
, Alex Schuster wo...@wonkology.org wrote:
Massimiliano Ziccardi writes:
emerge --update --deep world
but I get the following error:
[blocks B ] kde-base/kdebase (kde-base/kdebase is blocking
kde-base/kdelibs-3.5.10-r6)
I'm not very expert about emerge, have you any idea about
It's far preferable to let people like yourself suffer the consequences of
not
reading documentation
Touched :-)
However, I read the documentation.
It's just that this is my first gentoo installation: I didn't get I had to
uninstall the older version of the software to upgrade to the new one.
Thank you all for your beautiful help and your patience (my thread is 33
mails long!!).
This has been one of the best support I have ever got (much better than many
paid support services).
Thank you!
Massimiliano
Hi Ward. Thank you for your clarification.
Just to be sure I have undestood right.
The document says:
Since 22 Oct 2008, Gentoo switched all ebuilds to the upstream naming:
x11-drivers/xf86-video-intel. The ebuild xf86-video-i810 no longer exists.
To switch, set the VIDEO_CARDS variable to
Done. After that I did:
emerge -av xf86-video-intel
killall -1 X
However, performances didn't change much...
x...@localhost ~ $ glxinfo | grep render
direct rendering: Yes
OpenGL renderer string: Software Rasterizer
Other ideas?
Thank you,
Massimiliano
It just means that you need to change
I'm following to the letter, now :-)
However, it says I need xorg 1.6, so, now I'm upgrading.
Here is my package.keyword files
=x11-base/xorg-server-1.6
=x11-libs/libXfont-1.4
=x11-proto/randproto-1.2
I hope it won't break my system :-)
I'll let you know the result.
Thanks a lot,
Rasterizer
Don't know what to do more
Any idea?
Thanks a lot,
Massimiliano
On Mon, Jun 22, 2009 at 3:04 PM, Massimiliano Ziccardi
massimiliano.zicca...@gmail.com wrote:
I'm following to the letter, now :-)
However, it says I need xorg 1.6, so, now I'm upgrading.
Here is my
One more thing.
Now, driconf says 'Could not detect any configurable direct-rendering
capable devices. DRIconf will be started in expert mode'.
Before the config changes I did, I never got this message calling driconf
On Mon, Jun 22, 2009 at 4:07 PM, Massimiliano Ziccardi
massimiliano.zicca
More INFO
Running driconf, I see the following message:
Xlib: extension XFree86-DRI missing on display :0.0.
However, inside the xorg.0.log, I see:
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX:
I'm close to the solution.
If I run glxinfo | grep renderer as root, I get
direct rendering: Yes
OpenGL renderer string: Mesa DRI Mobile Intel�� GM45 Express Chipset GEM
20090114
while, if I run the same command as a simple user, I get
direct rendering: Yes
OpenGL renderer string: Software
Finally it works!
I just had to add my user to the 'video' group.
Shouldn't new user be added to such groups by default?
driconf, always says
Xlib: extension XFree86-DRI missing on display :0.0.
Thank you a lot,
Massimiliano
Hi James, Ward, Adam!
Thanks for your help!
To James: Yes, I've an intel card. I followed many guides.
My card is :
Identifier Card0
Driver intel
VendorName Intel Corporation
BoardName Mobile 4 Series Chipset Integrated Graphics Controller
BusID
, 19/06/2009 в 10:12 +0200, Massimiliano Ziccardi пишет:
Hi James, Ward, Adam!
Thanks for your help!
To James: Yes, I've an intel card. I followed many guides.
My card is :
Identifier Card0
Driver intel
VendorName Intel Corporation
BoardName
Thank you all. I think I'll wait, however, do you think that that is the
problem that cause
glxinfo | grep renderer
direct rendering: Yes
OpenGL renderer string: Software Rasterizer
On my ubuntu machine, I get :
direct rendering: Yes
OpenGL renderer string: Mesa DRI Intel(R) 965Q GEM 20090326
Do you mean into the xorg.conf file (I'm not very expert in configuring
X...)?
In my previous mail I sent the xorg.conf file. Do I have to change
something?
Thanks you,
Massimiliano
On Fri, Jun 19, 2009 at 4:09 PM, Ward Poelmans wpoel...@gmail.com wrote:
2009/6/19 Massimiliano Ziccardi
Hi Adam.
Thanks for your help.
I read that document a while ago.
It says I need :
1) gentoo-sources 2.6.29 + : I'm ok, my version is 2.6.29-r5
2) xorg-server 1.6+ : here I'm too old. I have 1.5.3-r6. however, emerge
says that 1.5.3-r6 is the latest available
3) xf86-video-intel 2.6.1+: I
Sorry, I read that document after I sent the e-mail.
However (but maybe I've understood wrong), it says that I have to define
that variable only if I want to use the old xf86-video-i810 name. If I don't
define that, I should use the new name (xf86-video-intel).
Do I get any improvement using the
No one answered to my mail so far Do you mean I should switch to windows
? ;-)
Please, can someone give me some hint?
Do you need some more information to be able to help me?
I have a ThinkPad lenovo R500 running the latest GENTOO.
Here is what I found so far.
Everything works, but I have
Hi all.
I have a ThinkPad lenovo R500 running the latest GENTOO.
Everything works, but I have 2 problems:
1) OpenGL screen saver do not works
2) Graphic is not very fast.
I think the first problem is related to the second one.
I think (but I'm not sure) that the source of my problem is this:
Do someone know which test can I do to understand what do I miss ?
Thanks,
Massimiliano
On Wed, Jun 17, 2009 at 12:35 PM, Massimiliano Ziccardi
massimiliano.zicca...@gmail.com wrote:
Hi all.
I have a ThinkPad lenovo R500 running the latest GENTOO.
Everything works, but I have 2 problems
74 matches
Mail list logo
