ite
>tun-mtu 1500
>tun-mtu-extra 32
>mssfix 1200
>persist-key
>persist-tun
>remote-cert-tls server
>ca "/etc/openvpn/clinic_atom/ca.crt"
>cert "/etc/openvpn/clinic_atom/syscon7.crt"
>key "/etc/openvpn/clinic_atom/syscon7.key"
>tls-auth "/etc/openvpn/clinic_atom/ta.key" 1
>comp-lzo
>log /var/log/openvpn.log
>log-append /var/log/openvpn.log
>verb 3
>
>--
>Thelma
--
Kind regards,
Roger
her
services?
Or alternatively, is there any way to set it as the first service
that
starts? Does anyone listening know?
I'm just curious now.
--
Regards,
Roger Welsh
ing?
OR is that not the behaviour you get?
Also to note:
rc_parallel="yes" may cause the boot process to lock up.
(I wonder if that has been causing some of these boot freezes.)
rc_interactive="yes" is DISABLED (automatically), if rc_parallel
is set
to "yes".
--
Best of luck
Roger
em to boot in single-user mode and hopefully not
start the mysql service.
Otherwise, any compatible Linux LiveCD is your friend.
Good luck
--
Roger Welsh
//github.com/rjhwelsh/gpg-tutorial/blob/master/password_checker.ods
I provide no warranty for my working. ;)
--
Roger Welsh
fpr: 2FCB 9E31 EA77 CDEC A3AE 5DD7 D54C C777 553A 180D
p partition is in there somewhere.
This command will show you any swap partitions in use.
# swapon --show
Good luck!
--
Roger Welsh
fpr: 2FCB 9E31 EA77 CDEC A3AE 5DD7 D54C C777 553A 180D
There is the `--alert, -A` option for sending a terminal bell when
emerge needs some interaction.
I presume that you are looking at something on a per-ebuild basis, and
not something as simple as :
`emerge -avuDN @world &&
aplay success.flac ||
aplay fail.flac`
I'm curio
. When
> I am not familiar with dhclient, although whenever I used it in various
> distros it just worked. Have you tried using dhcpcd instead?
> --
> Regards,
> Mick
I second Mick's suggestion.
I use dhcpcd (with ddclient for dynamic dns) on my home server, which seems to
work well en
eplace Python 3.5 in the default Python
targets for Gentoo systems. The new default targets will be:
PYTHON_TARGETS="python2_7 python3_6"
PYTHON_SINGLE_TARGET="python3_6"
Hope this helps.
--
Roger Welsh
fpr: 2FCB 9E31 EA77 CDEC A3AE 5DD7 D54C C777 553A 180D
signature.asc
Description: PGP signature
Hi all,
Thank you for your messages.
It's not easy to make a choice among
the so numerous machines.
Finaly I took the:
HP OfficeJet 7612 Wide Format All-in-One Printer
I hope it will give me satisfaction.
Roger
Hi,
For my birthday (!) my children want to offer me a multifunction
printer, copier.
I ask you for an idea which one they could buy.
For example: Multifonction A3 HP Officejet Pro 7612
-gentoo amd64 compatible
-inkjet color (4colors)
-ethernet
Thank you for your help
Roger
://gitlab.com/muttmua/mutt/wikis/MuttGuide/UseGPG
> > http://codesorcery.net/old/mutt/mutt-gnupg-howto
> >
>
> In the meantime NeoMutt != Mutt, so not to forget to mention
> <https://www.neomutt.org/guide/>. ;-)
Lol. Of course. I read that for my current setup. Though I nev
used when setting my gpg up with mutt were:
https://gitlab.com/muttmua/mutt/wikis/MuttGuide/UseGPG
http://codesorcery.net/old/mutt/mutt-gnupg-howto
I remember in particular reading the codesorcery one pretty closely.
Hope this helps.
--
Roger Welsh
fpr: 2FCB 9E31 EA77 CDEC A3AE 5DD7 D54C C777 553A 180D
signature.asc
Description: PGP signature
Do you have something relevant in the logs ?
In /var/log/dmesg I found:
3.907048] usb 7-2: new low-speed USB device number 2 using uhci_hcd
[3.935212] usb 2-6: New USB device found, idVendor=04b8, idProduct=0007
[3.935214] usb 2-6: New USB device strings: Mfr=1, Product=2,
Hi all,
gentoo-4.4.26, amd64, Epson D120
I can't neither print nor open localhost:631
Yesterday I stopped the printer hardly by pushing the STOP button.
I could at this time go in localhost:31 and tried to stop the action in
"jobs"
and made some settings (I don't remember which !!).
Hi again !
Please, if you answer me at the previous message
use the following adress:
roger.c...@free.fr
Yes, now check your make.conf entry, it seems you used the letter 'o'
there, and not a zero. Fix that, and maybe your libreoffice will be in
french again :)
It is a zero and not a o
But in make.conf I writed a new L10N
and I compiled app-office/libreoffice-l10n again
There was nomore -fr in it
It's "L ten N" Instead of "L one o N" (Zero instead of upper letter o).
Yes, it's a zero in L10N !
eix libreoffice shows
[I] app-office/libreoffice-l10n
Installed versions: 5.1.2.2^s(10:12:41 27/06/2016)(-offlinehelp
L10N="-af -am -fr
ith L10N having -fr instead of +fr
I think it is the reason of this.
How could I solve the problem ?
Thank you for your help
Roger
Have you tried another (differnt make/model) keyboard?
If you get the same problem,it is software related,
if it goes away, then you are good to go.
In Parameters Keyboard Settings I found a line with
Command . and shortcut .
I removed it, and now it's ok.
Thank you for your answers
Roger
Le 09/07/2015 10:51, Neil Bothwick a écrit :
On Thu, 09 Jul 2015 10:07:06 +0200, Roger Cahn wrote:
Since a few days, when I type the point (.) on the numeric keypad,
everytime, I obtain a window with:
Impossible to launch the shortcut KP_Decimal.
The execution of the son process . failed
Le 10/07/2015 14:59, Roger Cahn a écrit :
Le 09/07/2015 10:51, Neil Bothwick a écrit :
On Thu, 09 Jul 2015 10:07:06 +0200, Roger Cahn wrote:
Since a few days, when I type the point (.) on the numeric keypad,
everytime, I obtain a window with:
Impossible to launch the shortcut KP_Decimal
?
I didn't find any answer on internet.
Thank you for your help
Roger
Hello all,
Thank you very much for your help: problems solved.
-PYTHON_TARGETS=python2_7 are now defined
-PAGER=most is defined in your environment: Icompiled it again.
Now man emerge works.
Well, I'm now quite quiet...until next problem !!!
Thank you again
Cheers
Roger
having to
disentangle a cat's cradle.
It' not in make.conf.
Your remark is judicious ;-)
Roger
chaos account
Unset: CPPFLAGS, CTARGET, INSTALL_MASK, PORTAGE_BUNZIP2_COMMAND,
PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS,
USE_PYTHON
$eselect python list
Available Python interpreters:
[1] python2.7 *
[2] python3.3
Thank you for your help.
Cheers,
Roger
is that older kernel seems to load in a bunch
of modules and starts mdev, I believe, before trying to locate root. I am
also using Lilo since my motherboard doesn't seem to like grub. Any help I
could get would be appreciated.
roger
Here is a print out of lilo.conf
boot=/dev/sdb
map=/boot/map
appreciate any help offered.
Thanks,
Roger
the
command. I feel like a goof for asking but has anyone else run into this
error?
roger
translation
made by google than by any other, human being ;)
Anyway
What you are describing that is, I think, called a ground loop in
English.
Cheers,
Roger
1. are the lights on or flashing with a cable plugged in and pinging
something valid?
No. They are stable
That indicates a problem - if a packet is going out/in, the lights
shouls flash
Excuse me; I looked only half a second!!! Yes they are flashing.
Since this night I found something
If the PC has wireless it would be a quick test to run to prove if the eth0
NIC on the mobo is borked.
Yesterday night, under Win XP (!), I could connect
to internet with wifi.
was really a hardware one,
not the cable, but just the little box connected
to the wall socket for my connection to the router
through the house electric circuit.
But the most important thing is to succeed :-)
Once more a great thank you.
Roger
You've been using powerline networking and never thought to mention it
throughout this entire thread, even when people were saying it had to be
a hardware problem?
Excuse me Neil, and the others, but you're right,
I should have mentionned it.
Well, as long as your connection problem is now solved you can carry on with
using your Gentoo! :)
Yes, I'm very happy to be able
to use it again on my desktop.
Long life to Gentoo, indeed!!!
Or someone's standing on the cable :-)
Yes, a bad spirit!!!
I resume.
1-The problem occured after I tried to share my Epson printer
between my three PCs: Gentoo+XP (twice) and W7
2-The NIC is included in the motherboard (Asus P5K-E)
3-The cable from the dektop, where the problem exists,
works
This really sounds like broken hardware and if the
cable is fine, the NIC is suspect.
I'm afraid you're right!
But, as I just wrote, the NIC is included in the motherboard...
PERHAPS a solution: try a restore from the
external HD where I have saved a week ago with
fsarchiver on SystemRescueCD.
Can you get hold of a PCI* NIC to try, it will appear as eth1.
Excuse me, I don't understand what you mean get hold of a PCI* NIC :-(
A lspci gives:
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E
Gigabit Ethernet Controller (rev 12)
.
Roger
Apologies if I missed someone already asking these:
No problem! Thanks to try to help me.
1. are the lights on or flashing with a cable plugged in and pinging
something valid?
No. They are stable
2. can you ping yourself (both 127.0.0.1 and the nic IP) - cable plugged
in
They work both
Reset the switch too?
Excuse me Thanasis but I don't understand what you mean ;-(
Wait 5 minutes and then restart the whole thing.
I did it, but without success :-(
: eth0: enabling interface
[ 15.971076] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.140340] sky2 :02:00.0: eth0: Link is up at 100 Mbps, full
duplex, flow control rx
[ 19.140340] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 29.418039] eth0: no IPv6 routers present
Roger
open a root terminal and type
ifconfig
and
route -n
Here it is:
ifconfig
eth0 Lien encap:Ethernet HWaddr 00:1e:8c:4a:44:db
inet adr:192.168.1.20 Bcast:192.168.1.255 Masque:255.255.255.0
adr inet6: fe80::21e:8cff:fe4a:44db/64 Scope:Lien
UP BROADCAST
When you then run:
route add default gw 192.168.1.1
to define a route manually what do you get in response and then what does it
show:
route -n
and what does ip show:
ip link show dev eth0
Here it is. But the last command not found!
route add default gw 192.168.1.1
Bureau cahn #
open a root terminal and type
ifconfig
and
route -n
Try to boot from a rescue or live CD (like ubuntu maybe) and see what
you get.
After the SystemRescueCD was launched, ifconfig
gave for etho a bad adress: fe00::
and route -n gave kernel IP routing table
but without answers
Le 15/06/2011 16:52, Paul Hartman a écrit :
It is in package sys-apps/iproute2
Yes and I haven't it emerged.
But I can't do it because...I have no connection to internet!
Thanks Paul for helping me
Roger
If you have another device with Internet connection you can download
the missing files and place it into your /usr/portage/distfiles
Thank you Paul for the tip :-)
Roger
Now I have emerged iproute2 and I can give also the last answer
route -n
and what does ip show:
ip link show dev eth0
route add default gw 192.168.1.1
Bureau cahn # route -n
Table de routage IP du noyau
Destination Passerelle Genmask Indic Metric RefUse
Iface
Once you are inside the SystemRescueCD (has finished booting) try to
start the network. It should get an IP from the router's dhcp server.
If it doesn't, then try to assign manually one to eth0, and test.
OK. I make an ifconfig and the adress is: 169.264.240.204
and of course Firefox has no
Can you please try to ping your router:
ping -c 3 192.168.1.1
It fails: Destination Host Unreachable
if this fails try to ping other PCs in your LAN.
I can't get other PCs
If that fails too can you use arping instead:
arping -c 3 -I eth0 192.168.1.1
or the same with the IP
Assign one manually.
ifconfig eth0 down 0
ifconfig eth0 192.168.1.111 up
ifconfig
route -n
ping 192.168.1.1
arp -a
It works as well with SystemRescueCD as on a terminal
But ping to another PC gives Destination Host Unreachable
icmp_seq=3 Destination Host Unreachable
--- 192.168.1.1 ping statistics ---
3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 1999ms
pipe 3
? (192.168.1.1) at incomplete on eth0
Well, I stop beczusse I'm occupied now!
To morrow is another day ;-)
Roger
would like this was the key, but... :-(
Roger
to background, child pid 6744
[ ok ]
* received address 169.254.79.43/16
Could please anybody tell me how to solve this awkward problem?
Thank you very much
Roger
might try resetting it
I'll try it!
Thank you again Todd
Roger
:]!).
config_eth0=dhcp
In the box I stopped the option fixed adresses,
but the problem remains the same :-(
Thanks for your answers
Roger
Can you check the network cable and connections to ensure that is actually
correct?
The cable and connections are well.
Thank you Joost
Roger
--- 192.168.1.1 ping statistics ---
3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 1999ms
pipe 3
Regards
Roger
address based on the MAC address of the requestor?
Yes. I put manually in the box (router) ip and mac adresses.
Can you check the DHCP logs on the DHCP server?
No!
Regards
Roger
Try setting an address manually:
ifconfig eth0 192.168.1.20 broadcast 192.168.1.255 netmask 255.255.255.0
route add default gw 192.168.1.1 (assuming that this is your router)
It doesn't work: error locating host target (for route)
Regards
Roger
/etc/init.d/../conf.d/net
* ERROR: net.eth0 failed to stop
(command unobtenaible)
Of course, ifconfig eth0 192.168.1.20 up didn't give an answer!
What's the IP of your router?
192.168.1.1
Thank's a lot for your help Thanasis
Roger
Unreachable
From 192.168.1.20 icmp_seq=3 Destination Host Unreachable
From 192.168.1.20 icmp_seq=4 Destination Host Unreachable
From 192.168.1.20 icmp_seq=6 Destination Host Unreachable
Thanks for help
Roger
Can you ping 192.168.1.1 from another machine?
Yes, from my laptop with which I'm writing
Portable cahn # ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
64 bytes from 192.168.1.1: icmp_req=1 ttl=64 time=3.86 ms
64 bytes from 192.168.1.1: icmp_req=2 ttl=64 time=3.86 ms
64
497 lines. Could you please: increase the buffer and turn off usb debugging?
Hi Volker,
I tried again and I hope you'llhave now the complete dmesg.
Here is the adress:
http://dl.free.fr/qUJf6qr39
.
Roger
support ---
SCSI Device Handlers ---
OSD-Initiator library
I hope it will help you...and me :-)
Roger
complete dmesg would be nice nonetheless.
But in dmesg there are 1106 lines!
Would you like I send all or only a part of them?
* SCSI CDROM support
[*] Enable vendor-specificextensions(forSCSICDROM)
* SCSI generic support
try that as module and reload it - what
isnt it a pioneer sata device by any chance?
No, it isn't.
Thanks for your answer
Roger
and dmesg says what?
Because threre are many lines (1106)
you can get it at this adress:
http://dl.free.fr/eaWeJr0WB
I hope it will work!
,
PORTAGE_RSYNC_EXTRA_OPTS, PORTDIR_OVERLAY
Thanks for the help
Roger
Ask not will this work on Gentoo, rather ask will this work on
Linux!
Your answer is very interesting, Iain.
I'll try what you wrote, and then take my decision ;-)
Thank you very much for the explanation.
Roger
but perhaps you can find it on
other distros' wiki or at least find laptops with common hardware.
http://en.gentoo-wiki.com/wiki/Index:Laptops
Thank you Fatih.
I'll try also your suggestions.
Roger
Whrs
AC AdapterOutput: 19 V DC, 6.32 A, 120 W
Input:100-240 V AC, 50/60 Hz universal
I hope it will help you...and me;-)
Roger
Hi,
I want to buy a laptop Asus N series,
but could anybody tell me if its possible
to use it with Gentoo-Linux?
And in case of yes, if it's a good choice?
Thank you
Roger
problem.
Roger
Walter Dnes waltd...@waltdnes.org writes:
On Thu, May 06, 2010 at 11:49:01AM -0230, Roger Mason wrote
Egg on face. The processor is listed in the bios as Intel EM64T.
Does that mean I should re-build this as an amd64 system?
No, it's not necessary. 64-bit Intel and AMD cpus will run
to re-boot it for
me as I'm not in the office.
I'll let you know what happened.
Thanks Andrea and everyone else for your help.
Roger
.
Cheers,
Roger
-genkernel-x86-2.6.32-gentoo-r7
I have verified that the names of the kernel and initrd on the disk
match those in grub.conf. In any case a wrong filename is usually
signalled as 'not found' during the boot process.
Can anyone suggest how to debug this?
Thanks,
Roger
Mick michaelkintz...@gmail.com writes:
On 6 May 2010 09:37, Roger Mason rma...@mun.ca wrote:
Can anyone suggest how to debug this?
When I get problems like this I usually run grub in a terminal and
then use autocompletion to find out what grub sees:
root (hd --tab
it will list all
Roger Mason rma...@mun.ca writes:
Can anyone suggest how to debug this?
Egg on face. The processor is listed in the bios as Intel EM64T.
Does that mean I should re-build this as an amd64 system? If the answer
to that is yes, then I don't understand why the x86 install CD booted
without
Stroller strol...@stellar.eclipse.co.uk writes:
On 6 May 2010, at 09:37, Roger Mason wrote:
...
I just built a new machine (celeron 3 GHz) using a script that builds
the kernel using genkernel and a config that is copied from that of
the
kernel on the install cd.
Are you sure ext[234
Mike Edenfield kut...@kutulu.org writes:
On 4/30/2010 12:40 PM, Roger Mason wrote:
Mike Edenfield kut...@kutulu.org writes:
Have you tried using sys-devel/crossdev?
Not in the present context.
It will set up the entire 32-bit cross-compiler environment for you;
then it's just a matter
`tparam.o' is incompatible with
i386:x86-64 output
/usr/lib/gcc/x86_64-pc-linux-gnu/4.2.4/../../../../x86_64-pc-linux-gnu/bin/ld:
i386 architecture of input file `version.o' is incompatible with
i386:x86-64 output
Thanks,
Roger
David W Noon dwn...@ntlworld.com writes:
On Fri, 30 Apr 2010 12:10:02 +0200, Roger Mason wrote about
[gentoo-user] Compiling 32 bit library on x86_64:
Hello,
I need to compile a 32 bit version of libtermcap on an x86_64
(multilib) system. Can someone tell me how to set up CFLAGS
setting up cross-compilation so that I could use a
rather heterogeneous collection of amd64, ppc and x86 machines in
icecream. Unfortunately I could not get cross-compilation to work. I
asked about it in this forum but did not get any replies.
Cheers,
Roger
for the next week or so, but then my
time will be a bit more flexible.
Cheers,
Roger
the fallback 'C' locale.
Roger
files.
Thanks for your help
Roger
tried with gimp and it worked.
I don't indeed understand what happened!
Roger
I resolve this problem?
Many thanks for a help
Roger
Hi Roger,
Hi Walt,
Thank you for your answer.
Just to clarify, are you saying the language problem was caused by using
the video projector, or by running the OO file on your laptop, or ...?
By using the video projector. It was the first time I used this one.
I never had this problem
Have you tried setting LINGUAS=fr in your make.conf?
Yes, it is.
Thank's
Roger
with hal). There is info on the wiki:
http://en.gentoo-wiki.com/wiki/Wacom_Tablet
Roger
for information.
Good luck,
Roger
Hi Alexander,
Alexander b3n...@yandex.ru writes:
On Friday 29 January 2010 19:45:53 Roger Mason wrote:
I would like to know how to configure gdm/gnome to ask for the
passprhase once, at login so that I don't have to enter it multiple
times.
Thanks,
Roger
try to install app-crypt
it multiple
times.
Thanks,
Roger
1 - 100 of 240 matches
Mail list logo