/21 um 23:54 schrieb Jack:
On 2021.11.06 18:00, Tamer Higazi wrote:
Hi people,
I got a problem getting "wireplumper" for pipewire to run.
tamer@tux ~ $ systemctl --user status wireplumber.service
tells me that it failed to start
× wireplumber.service - Multimedia Service Session Manager
Dear Canek,
With the latest update of systemd today:
sys-apps/systemd-249.4-r4:0/2::gentoo
everything works now fine.
Thanks for all your effort and support trying to help me.
best, Tamer
Am 9/8/21 um 9:57 PM schrieb Canek Peláez Valdés:
On Wed, Sep 8, 2021 at 9:14 AM Tamer Higazi
Hi ...
In another. The only difference I see is the
systemd-udev-settle.service, do you have it enabled it? What systemd-*
services do you have enabled? I have:
aztlan ~ # find /etc/systemd/system -name "systemd-*" -type l
stemd-udev-settle.service
● ├─systemd-udevd.service
○ └─network-pre.target
What about yours ?
best, Tamer
Am 9/7/21 um 10:06 PM schrieb Canek Peláez Valdés:
On Tue, Sep 7, 2021 at 2:35 PM Tamer Higazi <mailto:th9...@googlemail.com>> wrote:
[Unit]
After=systemd-udev-settle.servi
[Unit]
After=systemd-udev-settle.service
Am 9/7/21 um 8:45 PM schrieb Canek Peláez Valdés:
cat /etc/systemd/system/systemd-networkd.service.d/override.conf
Dear Dr. Valdés,
I am sorry to tell you that the result still remains the same.
I am also not a systemd expert
but somebody in the mailing list told me, that the "order" of process
might not be right ?
url: https://github.com/systemd/systemd/issues/7293
best, Tamer Higazi
● ├─systemd-udevd.service
○ └─network-pre.target
Any further ideas I am thankful.
best, Tamer Higazi
references: https://github.com/systemd/systemd/issues/7293
Am 9/5/21 um 9:51 PM schrieb Canek Peláez Valdés:
On Sun, Sep 5, 2021 at 1:36 PM Tamer Higazi <mailto:th9...@googlemail.com>&
]: Failed to start Wait for Network to be
Configured.
Am 9/5/21 um 7:07 PM schrieb Canek Peláez Valdés:
On Sun, Sep 5, 2021 at 2:46 AM Tamer Higazi <mailto:th9...@googlemail.com>> wrote:
Hi people,
After upgrading my gentoo box i see a new behavior, that my machine
after bo
Hi people,
After upgrading my gentoo box i see a new behavior, that my machine
after boot doen't configure my network. My network is configured through
systemd-network,
Only if I manually after login execute: "systemctl restart
systemd-network" it gets configured.
Can somebody tell me why
Hi people,
I want to deactivate my bluetooth device on my mainboard when gentoo is
loaded.
I don't want to "blacklist" the driver, more I want to tell the kernel
to ignore this hardware.
Is there a way to tell "gentoo" to disable, or not load the driver for
this particular hardware based on
Hi
The problem is that the bluetooth circuit seems to be damaged, as I have
recently the same result on Windows (not only on linux.
At Windows, I can deactivate the hardware at the "device manager", I
want this the same to be done on Linux.
Not the driver, just to ignore the hardware.
Why
Hi Wol,
If I am you, I would install "mate" desktop, which is basicly gnome2 and
gnome transition to wayland is as much as I know completed. XFCE is a
bit behind, that takes a time ...
https://wiki.gentoo.org/wiki/MATE
What I figured out, that this is not the very only thing to have wayland
Hi Peter,
You are not the only one I saw these phenomes.
What I also figured out, that "blocks" before an portage upgrade also
had been resolved completly.
best, Tamer
Am 26 Jun 2021 um 09:57 schrieb Peter Humphrey:
Hello list,
This is just an observation.
I update the rescue system on
hi people,
I got problems for building app-editors/pluma-1.2.4.1 that is required
for the desktop environment "mate".
any ideas that could solve this problem ?
Thanks in advance.
the full info is here:
https://pastebin.com/raw/PDkt7nwM
and the complete build log:
Take systemrescuecd and fix your partitions.
Let's see what might be the result.
best, Tamer
On 12/11/20 10:36 PM, the...@sys-concept.com wrote:
I wipe the /boot, reinstall kernel, initframes, grub.
The system boots, I can login as root but X is not running,
the command is displaying:
qt.network.ssl: QSslSocket::connectToHostEncrypted: TLS initialization
failed
On 2020-07-10 11:40, Tamer Higazi wrote:
Hi people,
I wanted to try keepassxc 2.6.0, but the output looks really nonsense
and the output looks entirely "broken".
I uploaded the screenshot at "imgur&
Hi everybody,
strange... i changed the theme to "high contrast" logged out (i
restarted my machine) and just recently logged in.
And keepassxc 2.6.0 works without any problems. nothing is broken
strange.
best, Tamer
On 2020-07-10 13:17, Tamer Higazi wrote:
Hi Neil,
W
Hi people,
I wanted to try keepassxc 2.6.0, but the output looks really nonsense
and the output looks entirely "broken".
I uploaded the screenshot at "imgur" imagehost. url:
https://imgur.com/WfrrP0T
I tried the same with the AppImage from the maintainer, the result is
the same.
Any
, Neil Bothwick wrote:
On Fri, 10 Jul 2020 11:56:26 +0200, Tamer Higazi wrote:
Hi Victor,
I am on XFCE, Version 4.14
This is only with version 2.6.0, the version before (2.5.4) is rendered
correctly.
The theming and appearance has changed significantly for 2.6.0 so it
could well be a theme
Hi Victor,
I am on XFCE, Version 4.14
This is only with version 2.6.0, the version before (2.5.4) is rendered
correctly.
best, Tamer
On 2020-07-10 11:53, Victor Ivanov wrote:
This is most curious. Under KDE Plasma version 2.6.0 works flawlessly.
What DE are you using?
Have you tried to
Ghostscript is installed by most pdf distributions, and if not merge it.
Look here:
gs -q -dBATCH -dNOPAUSE -sDEVICE=pdfwrite -sOutputFile=myoutput.pdf
fil21.pdf file2.pdf file3.pdf
best, Tamer
On 2020-07-09 17:39, Gerrit Kuehn wrote:
On Thu, 9 Jul 2020 13:31:36 +
Alan Mackenzie
Dear Alan,
I do it with ghostscript (for my cv's and employers proof of work) all
the time, and even change the header.
Then look here:
http://milan.kupcevic.net/ghostscript-ps-pdf/
the best short documentation I found so far.
best, Tamer
On 2020-07-09 15:31, Alan Mackenzie wrote:
Hi people,
I had a problem with docker on gentoo and found the solution for all my
problems with a custom mount command:
|sudo mount -t cgroup -o none,name=systemd cgroup /sys/fs/cgroup/systemd
Can anybody of you tell me how to add that one in /etc/fstab file ?
best, Tamer |
Hi Andrew,
it's on systemd.
Previously I had problems connecting with docker.
After I searched on Github, docker ran then without any problems at all.
best, Tamer
Am 3 Jul 2020 um 16:04 schrieb Andrew Udvare:
On Fri, Jul 3, 2020, 09:34 Tamer Higazi <mailto:th9...@googlemail.com>&
Thanks Michael!
I'll give it a try.
best, Tamer
Am 3 Jul 2020 um 15:46 schrieb Michael:
On Friday, 3 July 2020 14:33:52 BST Tamer Higazi wrote:
Hi people,
I had a problem with docker on gentoo and found the solution for all my
problems with a custom mount command:
|sudo mount -t cgroup -o
hi everybody
I am trying to merge ruby-2.6.6 and I am not getting to be successful.
Any ideas how to accomplish that ?
I am looking to hearing from you.
best, Tamer
-- snip -- snip -- snip --
tamer@tux /var/www/discourse $ emerge -pv =dev-lang/ruby-2.6.6
These are the packages that would
.
best, Tamer
On 2020-06-02 03:04, Tamer Higazi wrote:
Dear Jack,
I did the same with "su -" and changed to root and the result is still
the same.
Any ideas what I did wrong ?
best, Tamerr
>>> Source compiled.
[31;01m*[0m --- ACCES
Hi people,
I face problems updating my system with emerge -uDN @world and the whole
procedure dies with setuptools.
Any ideas ? I am stuck and want to update the system.
best, Tamer
--- SNIP --- SNIP --- SNIP --- SNIP --- SNIP --- SNIP
[32;01m * [39;49;00mPackage:
Dear Jack,
I did the same with "su -" and changed to root and the result is still
the same.
Any ideas what I did wrong ?
best, Tamerr
>>> Source compiled.
[31;01m*[0m --- ACCESS VIOLATION SUMMARY
---
[31;01m*[0m LOG FILE:
Dear everybody,
I got my Gentoo system running compiled with openssl.
I'd like to rebuild my entire system based on libreSSL.
What best practices do you advise ?
Thanks.
best, Tamer
stem crash.
On 12/22/19 19:19, Tamer Higazi wrote:
sorry.
I am totally stupid. I got you now.
Check if the networkmanager of systemd or "DEFINETLY" openrc is used.
More I cannot tell you
best, Tamer
On 2019-12-21 18:15, n952162 wrote:
Okay, I have an update on this.
Note that wl
sorry.
I am totally stupid. I got you now.
Check if the networkmanager of systemd or "DEFINETLY" openrc is used.
More I cannot tell you
best, Tamer
On 2019-12-21 18:15, n952162 wrote:
Okay, I have an update on this.
Note that wlp3s0 is the WireLess adapter and enp0s2 is the wired
Hi,
I had the same issue.
1st you have to check how the ipaddresses are managed ?
Are you sure that you make use of gentoo network addressing and not th
systemd network manage ?
Be tripple sure of it, and have a look there:
/etc/systemd/network/
2nd. Your WLAN board should give ip-addresses
Dear Peter,
Adding ipv6 address is not the deal.
Question(s):
How do you connect to the internet ?
Do you connect through pppoe (point-to-point-over-ethernet) or over ppoa
(point-to-point-over-atm) ?
Does your modem handle the dialin for you automatically?
In this case there are 2 other
In europe it's a bit different.
My gentoo client runs in dual stack mode so my server does as well.
I have ipv4 and ipv6 enabled and get 2 ip addresses from my ISP.
of course i have 2 firewall rules, iptables and ip6tables. But why not.
works out of the box.
On 2019-11-27 01:09, Rich
Hi people,
For a specific time I have a very strange behaviour on gentoo.
I cannot start any applicaion on xfce, just logout or shutdown the machine.
When I try through an existing open shell to execute a program I get
this error:
tamer@tux / $ firefox-bin
No protocol specified
Error: cannot
Hi people,
As systemd handles netwok, I can do it as well with time!
You can safely delete every ntp package and edit the file:
/etc/systemd/timesyncd.conf
and change its content to:
[Time]
NTP=0.ch.pool.ntp.org 1.ch.pool.ntp.org 2.ch.pool.ntp.org 3.ch.pool.ntp.org
Hi People,
My mistake.
I got 2TB 2.5HD that all, with boot manager, data everyhing should go on
the SDD of the same size.
What steps would you advise me ?
Sorry, for missunderstandings.
best, Tamer
Hi people,
I get a 2TB NVMe M.2 for my machine, and I want to replace my very slow
harddisk with this SDD.
I got the 2.5 hd, with (of course) Gentoo Linux and Windows 10
This is my partitiion layout:
Device Start End Sectors Size Type
/dev/sda1 2048 1023999
Hei Neil,
The NTPServer is in the internet, standard gentoo ntp.conf file:
# Pools for Gentoo users
server 0.gentoo.pool.ntp.org
server 1.gentoo.pool.ntp.org
server 2.gentoo.pool.ntp.org
server 3.gentoo.pool.ntp.org
I am using systemd-networkd, regarding the gentoo systemd network guide:
Hi Manuel,
I tried that one you advised. Still not successfull .
best, Tamer
On 11.03.19 00:26, Manuel McLure wrote:
On Sun, Mar 10, 2019 at 3:41 PM Tamer Higazi <mailto:th9...@googlemail.com>> wrote:
Mar 11 00:33:36 localhost systemd[1]: Starting Set time via NTP using
Started Set time via NTP using
ntpdate.
then everything looks fine...
Any ideas ?
best, Tamer
On 10.03.19 22:36, Rich Freeman wrote:
On Sun, Mar 10, 2019 at 5:16 PM Tamer Higazi wrote:
I have my gentoo system running with systemd.
I figured out that ntpdate is getting started before
Hi people,
I have my gentoo system running with systemd.
I figured out that ntpdate is getting started before network is up.
I am not yet very familiar with systemd.
Can somebody of you tell me how to fix that, that "ntpdate" is started
the moment network devices are up ?
for any response
Dear Davyd,
Thanks again.
Have a nice weekend.
On 22.02.19 19:13, Davyd McColl wrote:
On 2019/02/22 19:52:57, Tamer Higazi wrote:
Hi David,
you were absolutely RIGHT.
I knew only from the past the Gentoo Installations, where the UUID was
not necessary.
I executed "blkid", too
ur edvises in the chat and the mailinglist
best, Tamer
On 19.02.19 05:13, Davyd McColl wrote:
On February 19, 2019 00:27:34 Tamer Higazi wrote:
Hi people,
I made a fresh systemd installation based and generated the kernel
with genkernel.
I am not capable to login after reboot. It is a EFI installa
Hi people,
I made a fresh systemd installation based and generated the kernel
with genkernel.
I am not capable to login after reboot. It is a EFI installation based
on systemd
I saw in the internet similiar posts, and I am stuck and not getting
it solved somehow to login with write access.
Has
Hey Joost!
You are beautiful... Thank you very much.
I'll soon have TV on my Linuxbox You are amazing!!!
Thank you very much.
best, Tamer
Am 28.10.2015 um 14:59 schrieb J. Roeleveld:
> On Tuesday, October 27, 2015 09:21:09 PM Tamer Higazi wrote:
>> Hi people!
>>
>
Am 27.10.2015 um 00:54 schrieb Heiko Baums:
> Am 27.10.2015 um 00:34 schrieb Tamer Higazi:
>> Hi people!
>>
>> I have upgraded to the latest kernel 4.2.0 and selected all PCI boards
>> As option to choose which frontent, I selected automatic selection.
>>
>&
Hi people!
As I am running successfully (recently) my DVB-S2 board on Gentoo Linux,
I need to search for the DVB-S2 channels which only this application
"scan-s2" is able to accomplish.
http://www.linuxtv.org/wiki/index.php/Scan-s2
Has anybody of you compiled this application successfully
video 212, 3 27. Okt 00:12 net0
before I got to bed I recompile glibc, gcc x 2times and built the gentoo
kernel once again.
best, Tamer
Am 27.10.2015 um 00:03 schrieb Mick:
> On Monday 26 Oct 2015 22:43:46 Heiko Baums wrote:
>> Am 26.10.2015 um 23:17 schrieb Tamer Higazi:
>>>
Hi people!
I do have a DVBSky S950 (PCI Express) in my gentoo system.
The poducer of this board told me that the kernel module is: cx23885
which I don't find. Can somebody help me which modules to load ?!
Where do I find those when I compile the kernel ?
04:00.0 Multimedia video controller:
Solved... I switched back to Gentoo 4.0.5 and it all went fine... but
the driver is buggy and I don't get it to run.
I'll post a new thread.
best, Tamer
Am 26.10.2015 um 13:24 schrieb Alan McKinnon:
> On 24/10/2015 14:10, Tamer Higazi wrote:
>> Hi people!
>> I am on a gentoo
Hi people!
I am on a gentoo machine, after updating my kernel, linux header and
restarted my machine I wanted to compile
"media_build"(http://git.linuxtv.org/cgit.cgi/media_build.git/about/).
What could this be that I get this error ?
http://pastebin.com/raw.php?i=Ubt5qhP0
output:
Hi people!
I wanted to make a system and world upgrade and have 6 blocks, I need to
get away before to upgrade. Any ideas howto solve that ?!
Thanks
--
Total: 177 packages (114 upgrades, 40 new, 17 in new slots, 6
reinstalls, 4 uninstalls), Size of downloads: 0 KiB
Fetch Restriction: 1
Hi Fernando,
Thanks for replying. I issued this command:
tamer@tux ~ $ emerge -pvuDN --with-bdeps=y @system @world
and got still these blocks :(
If you still have any ideas solving it, I'd be happy to hear from you.
These are the packages that would be merged, in order:
Calculating
Hi people!
I have problems getting these blocks at a system update solved...
I executed:
emerge --backtrack=30 -fuDN @system @world
Any ideas ?!
...
...
...
[blocks B ] perl-core/ExtUtils-Install-1.670.0
(perl-core/ExtUtils-Install-1.670.0 is blocking
Hi people!
Totally strange, I have merged (previous) and now the least version. But
I cannot execute skype.
When I say: whereis skype I get the result:
skype: /usr/share/skype
tamer@tux /opt/jitsi $ ls -lA /usr/share/skype/
insgesamt 12
drwxr-xr-x 2 root root 4096 1. Aug 22:07 avatars
Hi people!
I have asked myself if there are set of commands on Linux or Gentoo,
that if a file locally created it belongs to a special group.
Let us say:
/var/folderX
folderX belong to tamer:daemon
I want every file I create inside automatically belongs to: tamer:daemon
and not tamer:tamer
I don't know why, but I did a complete @system @world profile update
and everything got solved by itself.
Still, thanks a lot!
Tamer
Am 09.01.2014 03:30, schrieb Tom Wijsman:
On Thu, 09 Jan 2014 03:06:05 +0100 Tamer Higazi
th9...@googlemail.com wrote:
tried to merge libreoffice-bin
Hi people!
I finally managed to update my @system profile completly.
Now I want to update world, and I see that certain packages require
python_single_target_python2_7 or python_single_target_python3_2
I don't know how to change my make.conf that everything fits, that I can
update my entire
You were RIGHT!
I had to comment out at make.conf 2 lines (last line wasn't enough):
PYTHON_TARGETS and PYTHON_SINGLE_TARGET as well.
Thank you David!
Tamer
On 01/20/14 21:45, David Abbott wrote:
Try commenting them out.
[snip]
Regards,
David
I want to update the system and then world, but still have a lots of
blocks and don't know how to solve that.
emerge error output:
http://pastebin.com/raw.php?i=XTKQHUjk
On the gentoo forums nobody could help me.
Perhaps here any ideas ?!
gentoo actually wants to install systemd? Did you change
to gnome3? Which profile do you use?
Regards,
Ralf
On 01/09/2014 01:01 PM, Tamer Higazi wrote:
I want to update the system and then world, but still have a lots of
blocks and don't know how to solve that.
emerge error output:
http
I tried, and I get still blocks, independently which
PYTHON_SINGLE_TARGET I make use of!
http://pastebin.com/raw.php?i=hVLKC1J5
Any ideas ?!
Tamer
On 01/09/14 13:34, Hinnerk van Bruinehsen wrote:
On Thu, Jan 09, 2014 at 01:01:28PM +0100, Tamer Higazi wrote:
I want to update the system
tried to merge libreoffice-bin, and the dependency failed to compile.
Any ideas what might be the problem or how to solve that?!
http://pastebin.com/raw.php?i=dwMcutSq
Tamer
Pielmeier:
2013/6/19 Tamer Higazi th9...@googlemail.com:
Hi people!
I am trying to build pycrypto, by it fails to merge.
Always I get ACCESS VIOLATION. I didn't make the merge as user (with
sudo), I am doing it as root from a shell.
Which version of setuptools do you have installed?
You
Same result with the version of sandbox you make use of it!
Tamer
Am 19.06.2013 10:13, schrieb Helmut Jarausch:
That's strange, since I've just re-emerged the same version of PyCrypto
here.
One difference might be the version of sys-apps/sandbox
On my unstable Portage system I'm using
Daniel!
You were absolutely right, it was the doc USE Flag that caused the
problem.
Thank you
Am 19.06.2013 13:05, schrieb Daniel Pielmeier:
No ebuild should mess with the live system!!!
The problem is probably with the doc use flag.
Tamer you can also try to install pycrypto without
And I will file this evening a bug of course..
Am 19.06.2013 14:23, schrieb Tamer Higazi:
Daniel!
You were absolutely right, it was the doc USE Flag that caused the
problem.
Thank you
Am 19.06.2013 13:05, schrieb Daniel Pielmeier:
No ebuild should mess with the live system
Hi people!
I am trying to build pycrypto, by it fails to merge.
Always I get ACCESS VIOLATION. I didn't make the merge as user (with
sudo), I am doing it as root from a shell.
Not even a shell opened in gnome. Just in a plain terminal session.
If anybody of you could tell me where the error
Am 30.05.2013 10:04, schrieb Andrea Conti:
No. :)
While Intel Macs are EFI platforms, they have an early and quirky
implementation that cannot properly boot Windows in EFI mode
I hope you are not right for the latest MAC Mini, I would like to buy.
PS: Sorry, long line
Tamer
Okay, I meanwhile got that even the most new Mac Mini Servers make use
of the earliest implementations of EFI that Windows doesn't understand.
The only way to get Windows booted propperly is in BIOS emulation mode,
but that Partitions wouldn't be recognized (according it's emulation).
Hi Andrea!
Got the problem with Windows I red myself today through (h)
No need to answer my last Mail in the List, it is all clear to me now.
But thanks again, for the last long explanation anyway
Tamer
Am 30.05.2013 10:04, schrieb Andrea Conti:
The real problem
Hi Yuri,
If the MAC Mini has a UEFI Bios, then the whole problem we have talked
about was for nothing.
That is only related to 32 Bit Versions of Windows.
x64 Windows 7 Version comes with a UEFI Bootloader and an installer,
that can be used.
Hi Andrea!
Am 29.05.2013 11:25, schrieb Andrea Conti:
The real problem is that while rEFIt/rEFInd, OSX and Linux have no
problem dealing with a GPT partition table, Windows only supports MBR.
(Windows 7+ supports GPT partition tables but it can only boot from a
GPT disk in EFI mode.
So,
Hi people!
I have come close, according my profession to buy myself the latest Mac
Mini Server.
Because I do all of my development stuff on Gentoo and Windows, I am
highly interested to know if any of you guys is running Mac OS X and
Windows beside Gentoo and boot from GRUB.
What I hear all the
Hi!
My questions:
1. Do I need bootcamp?!
2. Why am I not able to accomplish this task with grubm and have to take
refind ?
3. What would be the way to install Windows, Linux and Mac on 1 hard
disk. Would that be possible?
I would kindly thank you for your answer.
Tamer
Boot Camp is a
, May 28, 2013, at 11:31 AM, Tamer Higazi wrote:
Hi!
My questions:
1. Do I need bootcamp?!
You don't need bootcamp, but it does make the windows install more
streamlined. You will probably still want bootcamp to install the apple
drivers post-install regardless. The drivers are the OS X
It's usually a quality power supply unit, that made it 6 years.
However, what I find totally strange, at the same time. That
applications die during my work.
Totally strange, like clock dies, and restarts. Eclipse dies, firefox
dies.
I have the feeling that memory and power supply are
Dale!
I am getting now myself a Mac OSX Mini Server with 8GB or 16GB RAM, and
get OSX, Windows and Gentoo there on a disk to run. That's it!
Proper screen with a very high resolution, and I am happy, and I am back
coding.
For future travels, My CPU makes with me the journey all the time
:)
The problem is the following, that the same crap happen on Windows as
well. I got there bluescreen after a while.
I made a memory test, and let it run over 50% of over all tests, and no
error displayed (perhaps I let it go more then hours).
However, I don't really believe that it is a memory
Hi people!
When I merge large or big packages like firefox, thunderbird or
chromium. The system hangsup with kernel panick and displays on the
screen reboot after 30 seconds.
What could it be?!
For any help or advises, I would kindly thank you.
Tamer
answer to stupid response:
as a normal user you wouldn't be capable to merge anything.
OF COURSE I DID IT AS ROOT!
Am 20.05.2013 05:31, schrieb staticsafe:
On Mon, May 20, 2013 at 05:24:29AM +0200, Tamer Higazi wrote:
Hi people!
I don't know how to merge the package pycrypto, I get always
walt, I am just confused because the entire system is totally unstable
and I need to update it
HP PLEASE.
Am 21.05.2013 02:13, schrieb walt:
On 05/20/2013 05:54 AM, Tamer Higazi wrote:
answer to stupid response:
as a normal user you wouldn't be capable to merge anything
Hi people!
I don't know how to merge the package pycrypto, I get always this error.
How do I solve this problem that portage can merge python packages
without any problems?!
Tamer
here the log:
ACCESS DENIED open_wr:
Hi people!
I uninstalled the linux-headers and the kernel-sources by accident, how
can I install then again?! Any ideas?!
I tried, but got at the linux-headers problems.
I have a linux-rescuecd on a usb stick, might it work over that way ?!
Tamer
Hi Michael,
Nope, I don't get them there.
1st question) where are the headers installed at all?!
2nd) where are the headers already compiled to get?!
Tamer
Install linux-headers-3.9 into
/var/tmp/portage/sys-kernel/linux-headers-3.9/image/ category sys-kernel
make -j5
Michael!
You didn't get my question Where does Gentoo install the
linux-headers, after compilining on the system?!
Tamer
Am 16.05.2013 15:16, schrieb Tamer Higazi:
Hi Michael,
Nope, I don't get them there.
1st question) where are the headers installed at all?!
2nd) where
Am 16.05.2013 15:42, schrieb Nikos Chantziaras:
On 16/05/13 16:20, Tamer Higazi wrote:
Where does Gentoo install the
linux-headers, after compilining on the system?!
They are installed in:
/usr/include/asm-generic
/usr/include/mtd
/usr/include/linux
/usr/include/asm
Hi people!
I want to have a feature installed on my gentoo machine, that if I boot
I am will see a high resolution console.
When I boot from the system rescue cd, at boot time it is being switch
to a higher resolution, which I want to have on my default system as well.
Can somebody of you tell
Hi João!
Seems to be that the bulldozer and FX architecture is from GCC 4.6.3 up
fully supported.
http://en.gentoo-wiki.com/wiki/Safe_Cflags/AMD#FX-8xxx.2F6xxx.2F4xxx_.28Bulldozer.29
Tamer
Am 15.04.2013 16:47, schrieb João Matos:
Great discussion.
I'm in a similar situation. I'm using a
Hi Dale!
Am 13.04.2013 13:54, schrieb Dale:
Pandu Poluan wrote:
I myself prefer AMD CPUs to Intel ones.
Intel has this habit of 'segmenting' their processor features. E.g.,
Intel VT-x (Intel's buggy implementation of AMD-V) is not available
across the board.
What is VT-x
And also
13.04.2013 18:24, schrieb Pandu Poluan:
On Apr 13, 2013 8:29 PM, Tamer Higazi th9...@googlemail.com
mailto:th9...@googlemail.com wrote:
Hi Dale!
Am 13.04.2013 13:54, schrieb Dale:
Pandu Poluan wrote:
I myself prefer AMD CPUs to Intel ones.
Intel has this habit of 'segmenting
Am 13.04.2013 19:45, schrieb Pandu Poluan:
One, I'm not Erick.
Sorry Pandu
Two, please don't top-post.
Three, AMD has no concept of Hyperthreading. Just match -j to the number
of cores your CPU provides, and that's it.
okay.
As I wrote, an AMD Quad Core provides actual 4 cores.
Hi people!
My old core2duo machine says slowly goodbye and I am at this lever after
7 years for buying myself a new developer machine, that should serve me
well for a long time again. With intel I never had problems, all their
systems were REALLY stable, and they were really worth their money up
Thank you!
Helped me very much
Tamer
Am 26.03.2013 23:02, schrieb Alan McKinnon:
On 26/03/2013 23:55, Tamer Higazi wrote:
Hi people!
I am looking for a way, to set eth0:0 at the moment the system is
booting is there a way?!
I always have to set it by hand by doing: ifconfig eth0
Hi people!
I can't update on my gentoo box gnustep-base. Always I get the error
I don't seem to be able to use your Objective-C compiler to produce
working binaries! Please check your Objective-C compiler installation.
If you are using gcc-3.x make sure that your compiler's libgcc_s and libobjc
Hi people!
I am looking for a way, to set eth0:0 at the moment the system is
booting is there a way?!
I always have to set it by hand by doing: ifconfig eth0:0 192.168.2.100
I would kindly thank you having a sollution for me.
Tamer
Hi Daniel!
It tells me:
wanrouter.ko: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV),
BuildID[sha1]=0xc0b7c0d39ff6be2335b0317010649c8fff44d58d, not stripped
what shoould I do know?!
Tamer
Am 07.03.2013 21:53, schrieb Daniel Frey:
On 03/07/2013 09:23 AM, Tamer Higazi wrote:
Hi people
Hi Alan,
insmod wanrouter.ko tells me in dmesg:
wanrouter: exports duplicate symbol register_wan_device (owned by kernel)
what does this message mean here ???
Tamer
Am 07.03.2013 21:57, schrieb Alan McKinnon:
On 07/03/2013 22:53, Daniel Frey wrote:
On 03/07/2013 09:23 AM, Tamer Higazi
1 - 100 of 158 matches
Mail list logo