On 05/08/10 15:25, Zhou Rui wrote:
What I want is finding a gateway out with ARP, and then assign the
correct
gateway/route table,
You cant discover a router with ARP. ARP finds the MAC address of a host
that's associated with a given IP address.
Ways of getting a ipv4 gateway
What I want is finding a gateway out with ARP, and then assign the correct
gateway/route table, stuff in the configuration can be found in
/etc/conf.d/net.example.
BTW, what's IP level stuff meaning? thanks.
2010/5/7 Adam a...@jaftan.com.au
On 05/06/10 03:35, Zhou Rui wrote:
Hi folks,
I
8.8.4.4 )
fallback_eth0=( dhcp )
dhcp_eth0=nodns
$ sudo arping2 -0 -r -c 1 -i eth0 -S 192.168.1.114 192.168.1.254
00:1d:xx:xx:xx:xx
Thanks for your help.
--
BR,
Zhou Rui
=( 192.168.1.114/24 )
routes_192168001254=( default via 192.168.1.254 )
dns_servers_eth0=( 8.8.8.8 8.8.4.4 )
fallback_eth0=( dhcp )
dhcp_eth0=nodns
2010/5/6 Zhou Rui gho...@gmail.com
Hi folks,
I setup a network interface to switch in two different network with
different gateways using
2008/8/25 Mick [EMAIL PROTECTED]:
On Monday 25 August 2008, Zhou Rui wrote:
2008/8/25 Mick [EMAIL PROTECTED]:
Or if you want to save the planet you could just press Alt every time you
want to wake up the console screen - it works over here.
You know, I'm testing some application would
2008/8/25 Mick [EMAIL PROTECTED]:
On Friday 22 August 2008, Zhou Rui wrote:
2008/8/21 Neil Bothwick [EMAIL PROTECTED]:
On Thu, 21 Aug 2008 11:25:39 +0200, Volker Armin Hemmann wrote:
xset -dpms
Or, if using a virtual console and not X,
setterm -blank 0
Yes, the command below worked
.
--
BR,
Zhou Rui
worked:
setterm -blank 0 -powersave off
Thanks.
--
BR,
Zhou Rui
-social, I'm just not user friendly
The X log locates in /var/log/Xorg.0.log
--
BR,
Zhou Rui
, 5 new, 4 reinstalls, 2 blocks), Size
of downloads: 86,834 kB
Has any solution about this? Thanks.
--
BR,
Zhou Rui
2008/8/12 Justin [EMAIL PROTECTED]:
Zhou Rui schrieb:
Hi,
I got 2 blocks in today's portage updating, they are about the gnome:
$ emerge -pvuDN world
These are the packages that would be merged, in order:
Calculating world dependencies ... done!
[ebuild U ] dev-libs/libxml2-2.6.32
--
If you have an apple and I have an apple and we exchange apples then you
and I will still each have one apple. But if you have an idea and I have one
idea and we exchange these ideas, then each of us will have two ideas. -
George Bernard Shaw
--
BR,
Zhou Rui
2008/8/7 Florian Philipp [EMAIL PROTECTED]:
Zhou Rui schrieb:
Hi,
I'm using a Intel 915 on board VGA card. After I install the Xorg, and
run:
# Xorg -configure
# X -config xorg.conf.new
The X startup failed but there is now error reported... I cannot find
what's wrong
with my config, so
2008/8/7 Florian Philipp [EMAIL PROTECTED]:
Zhou Rui schrieb:
2008/8/7 Florian Philipp [EMAIL PROTECTED]:
Zhou Rui schrieb:
Hi,
I'm using a Intel 915 on board VGA card. After I install the Xorg, and
run:
# Xorg -configure
# X -config xorg.conf.new
The X startup failed but there is now
2008/8/7 Florian Philipp [EMAIL PROTECTED]:
Zhou Rui schrieb:
2008/8/7 Florian Philipp [EMAIL PROTECTED]:
Zhou Rui schrieb:
2008/8/7 Florian Philipp [EMAIL PROTECTED]:
Zhou Rui schrieb:
Hi,
I'm using a Intel 915 on board VGA card. After I install the Xorg, and
run:
# Xorg -configure
)
And, I use the genkernel kernel booted the system.
Any idea about this? Thanks.
--
BR,
Zhou Rui
,
Zhou Rui
I have the same notebook. The sound worked for me only with 2.6.26. First
using vanilla 2.26.26-rcX and finally with gentoo-sources-2.6.26.
I switched to gentoo-sources-2.6.26 and the alsa card still cannot work, so can
you give me your .config file please.
Thank you.
--
BR,
Zhou Rui
kernel, does the LED of Intel 4965AGN works?
--
BR,
Zhou Rui
with madwifi, last time I used madwifi for my fujitsu
U1010 and it works fine.
--
BR,
Zhou Rui
? Or
there are some ways to get the hdapsd work
with gentoo way?
For the sound, the intel HD alsa support is already compiled as a module,
but I cannot find /dev/audio and actually the
device does not work at all, do I miss some options?
--
BR,
Zhou Rui
PROTECTED]
发送时间: 2008年6月27日 1:56
收件人: gentoo-user@lists.gentoo.org
主题: Re: [gentoo-user] 答复: [gentoo-user] Atheros 5xxx driver in kernel 2.
6.24-gentoo-r5
Am Donnerstag, 26. Juni 2008 schrieb Zhou Rui:
Finally, I emerged madwifi-ng and the WLAN card works. Add if I do the
cmd
manually:
# /etc
very much.
Zhou
-邮件原件-
发件人: Kan-I Jyo [mailto:[EMAIL PROTECTED]
发送时间: 2008年6月24日 17:15
收件人: gentoo-user@lists.gentoo.org
主题: Re: [gentoo-user] Atheros 5xxx driver in kernel 2.6.24-gentoo-r5
2008/6/24 Zhou Rui [EMAIL PROTECTED]:
Thanks for your help, but I'm still puzzled with the madwifi
very much.
Zhou
-邮件原件-
发件人: Kan-I Jyo [mailto:[EMAIL PROTECTED]
发送时间: 2008年6月24日 17:15
收件人: gentoo-user@lists.gentoo.org
主题: Re: [gentoo-user] Atheros 5xxx driver in kernel 2.6.24-gentoo-r5
2008/6/24 Zhou Rui [EMAIL PROTECTED]:
Thanks for your help, but I'm still puzzled with the madwifi
Thanks for your help, but I'm still puzzled with the madwifi driver and the
build-in ath5k driver. Does it mean
if I choose to install a madwifi driver I can still use my 2.6.24 kernel?
But the problem is I cannot find the non-hamradio
WLAN option in current kernel either...
-邮件原件-
发件人:
a
kernel with the Atheros driver?
Thanks.
Zhou Rui
2008/6/23 Zhou Rui [EMAIL PROTECTED]:
Hi everyone,
I'm using gentoo in my UMPC fujitsu U1010 which has a Atheros superG
wireless card. I found the wiki says there is a kernel option can
compile Atheros 5xxx WLAN driver into the kernel, but I cannot find it in my
kernel 2.6.24-gentoo-r5
27 matches
Mail list logo
