On Sunday 30 October 2005 05:42, Qiangning Hong wrote:
Did you use mdadm to make the arrays?
No, I create /etc/raidtab by hand and run mkraid for each md device,
following the steps of
http://gentoo-wiki.com/HOWTO_Gentoo_Install_on_Software_RAID
You can ignore any howto that tells you to
I have four identical SATA disks and want to create a Software RAID 10
array for my new gentoo system. But I am quite a newbie for the RAID
area. I googled but found nothing teach me how to setup a RAID10 on
four disks -- all the tutorials, howto, etc. are talking about setup
RAID1 or RAID0 or
On Sun, 30 Oct 2005, Qiangning Hong wrote:
As grub cannot be setup on RAID0 (neither RAID 1+0 nor RAID 0+1), I have
to create a four-partion RAID1 with /dev/sd[abcd]1 and mount it as /boot.
Then I want both my / and /var are RAID10. I use the following schema:
/dev/sda3/dev/sdb3
A. Khattri wrote:
On Sun, 30 Oct 2005, Qiangning Hong wrote:
As grub cannot be setup on RAID0 (neither RAID 1+0 nor RAID 0+1), I have
to create a four-partion RAID1 with /dev/sd[abcd]1 and mount it as /boot.
Then I want both my / and /var are RAID10. I use the following schema:
/dev/sda3
4 matches
Mail list logo