l you want.
\setuplabeltext
[en]
[chapter=Chapter ,
appendix=Appendix ,
hraban=Hraban ]
%\setuplist[chapter][label=hraban,width=3cm]
\setuplist[chapter][label=yes,width=3cm]
\starttext
\startfrontmatter
\completecontent
\stopfrontmatter
\startbodymatter
\chapter{First chapter}
\chapter{Seco
nge at level 3
around 'back1'
and they refer to the first chapter of the bodymatter and the first
chapter of the backmatter, respectively.
The example:
\setupinteraction [state=start]
\placebookmarks [chapter]
\starttext
\startfrontmatter
\startchapter [
d they refer to the first chapter of the bodymatter and the first
chapter of the backmatter, respectively.
The example:
\setupinteraction [state=start]
\placebookmarks [chapter]
\starttext
\startfrontmatter
\startchapter [title=front1]
\samplefil
TEXT
>> \startbackmatter
>> \startchapter[title=Literature]
>> \placelistofpublications
>> \stopchapter
>> \stopbackmatter
>> \stoptext
>
> Besides enabling numbering for the backpart you can use the appendix block
> which has numbering by default.
>
\startbackmatter
\startchapter[title=Literature]
\placelistofpublications
\stopchapter
\stopbackmatter
\stoptext
Besides enabling numbering for the backpart you can use the appendix
block which has numbering by default.
%\defineconversionset[appendix:default][n]
\starttext
\startfrontmatter
an
numerals, followed by the main text starting from page 1 in arabic
numerals.
So the twelfth page is 'XII', while the twenty-second is '2'.
How do I get 'XII' from 12 and '2' from 22?
\defineconversionset
[frontpart:pagenumber] [] [romannumerals]
\setuppagenumber
[way=byblock]
% Alternative met
than being reset
%
% \startsectionblockenvironment[bodypart]
% \resetuserpagenumber
% \stopsectionblockenvironment
\starttext
\startfrontmatter
\dorecurse{20}{\samplefile{lorem}\page}
\stopfrontmatter
\startbodymatter
\dorecurse{20}{\samplefile{lorem}\page}
\stopbodymatter
\stoptext
ntent than a file name.
BTW, if its contents cannot be in more than a single page, the approach
suggested above might be easier.
> \startfrontmatter[]
Empty brackets are not required here.
> \start
> \setuplayout[re
> \setupinterlinespace[.8ex]
I would say that
]
\setuppagenumbering[location=]
\input{03_portadaEval.tex}%this is my title page
\stopsectionblock
\startfrontmatter[]
\start
\setuplayout[reset]
\setupinterlinespace[.8ex]
\completecontent
\stop
\stopfrontmatter
\startbodymatter[]
\input
]
\setcounter
[userpage]
[0]
\setuppagenumbering
[location=]
\startdocument
\setupfooter[state=stop]
\startfrontmatter
frontpage
\stopfrontmatter
\setupfooter[state=start]
\startbodymatter
\dorecurse{10}{\samplefile{lorem}}
\stopbodymatter
\stopdocument
\setupfootertexts
[title
]
\setuppagenumbering
[location=]
\startdocument
\setupfooter[state=stop]
\startfrontmatter
frontpage
\stopfrontmatter
\setupfooter[state=start]
\startbodymatter
\dorecurse{10}{\samplefile{lorem}}
\stopbodymatter
\stopdocument
Jeroen schrieb am 04.09.2023 um 14:10:
I have a document with the first page in startfrontmatter and all
other pages in startbodymatter. The layout setting is as following
[...]
What would be the easiest way to change the layout only for the first
page since it has no footer. For the first
I have a document with the first page in startfrontmatter and all other
pages in startbodymatter. The layout setting is as following
\setuplayout
[backspace=20mm,
width=175mm,
topspace=15mm,
header=0mm,
footer=2mm,
height=275mm,
bottomheight=1mm,
footerdistance=10mm
initions[aps]
>
> % el text
>
> \starttext
>
> \startfrontmatter
> \input ng-pre-portada.conTeXt
> \input ng-pre-llicencia.conTeXt
> \input ng-pre-informacio-document.conTeXt
> \completecontent
> \stopfrontmatter
>
>
> \startbodymatter
>
> \startpart[
[default][ng-bibliografia.bib]
\setupbtx[dataset=default]
\usebtxdefinitions[aps]
% el text
\starttext
\startfrontmatter
\input ng-pre-portada.conTeXt
\input ng-pre-llicencia.conTeXt
\input ng-pre-informacio-document.conTeXt
\completecontent
\stopfrontmatter
\startbodymatter
\startpart[title
]
back
\stopmakeup
\startfrontmatter
...
\stopfrontmatter
...
\stopdocument
inserts a "blank" page (with header/footer) between the two Coverpages
and a second "blank" page after the backside title page.
Not including the two \startpagefigure lines eliminates the blank page
Hello,
Trying to use:
\startdocument
\startpagefigure[Coverpages.pdf][page=1]\stoppagefigure
\startpagefigure[Coverpages.pdf][page=2]\stoppagefigure
% before
\startmakeup [titlepage]
front
\stopmakeup
\startmakeup [titlepage]
back
\stopmakeup
\startfrontmatter
...
\stopfrontmatter
Thank you for this hint. It works (almost) as expected:
Strangely, I had to add, explicitly,
\startfrontmatter
\component FrontMatterStuff
\page[yes,header,footer,right]
\stopfrontmatter
\startbodymatter
...
\stopbodymatter
In order to get the frontmatter end with a totally blank page befor
s expected:
Strangely, I had to add, explicitly,
\startfrontmatter
\component FrontMatterStuff
\page[yes,header,footer,right]
\stopfrontmatter
\startbodymatter
...
\stopbodymatter
In order to get the frontmatter end with a totally blank page before a
right Chapter 1 header. Using just the
pear. On the other
>> > hand, the 12 chapters are present.
>>
>> \startproduct[terminale-manual]
>>
>> \startfrontmatter
>> \starttitle[title=Table des matières]
>> \placelist
>> [cha
I don't see why the table of contents does not appear. On the other
> > hand, the 12 chapters are present.
>
> \startproduct[terminale-manual]
>
> \startfrontmatter
> \starttitle[title=Table des matières]
> \placelist
>
On 4/20/2023 6:59 PM, Fabrice Couvreur via ntg-context wrote:
Hi,
I don't see why the table of contents does not appear. On the other
hand, the 12 chapters are present.
\startproduct[terminale-manual]
\startfrontmatter
\starttitle[title=Table des matières]
\placelist
Hi,
I don't see why the table of contents does not appear. On the other hand,
the 12 chapters are present.
Thanks
Fabrice
\startproduct[terminale-manual]
\project[terminale-environment]
\startfrontmatter
\setuppagenumbering
[location=]
\definefont
[ChapterTextStyle
font
% \showbodyfontenvironment
\useexternaldocument[m001][master001][Whispering of Inscriptions,
Vol.~{\sc ii}]
\startfrontmatter
\component tlpg000
{
\setupheadtext[content=Contents of Vol.~i.]
\setupheadertexts[Contents of
Vol.~i.][pagenumber][pagenumber][Contents of Vol.~i.]
\noheaderandfooterl
\starttext
\completecontent
\startfrontmatter
\dorecurse{5}
{\chapter{Chapter \recurselevel}}
\stopfrontmatter
\startbodymatter
\dorecurse{5}
{\chapter{Chapter \recurselevel}}
\stopbodymatter
\startbackmatter
\dorecurse{5}
{\chapter{Chapter \recurselevel}}
\stopbackmatter
\stoptex
On Sun, 12 Jun 2022, Joel via ntg-context wrote:
> I need to display a table of contents, but only displaying chapters.
>
> Here is my minimum working example:
You need to add "criterium=all" to both placelist and completecontent. See
below:
> \starttext
&
I need to display a table of contents, but only displaying chapters.
Here is my minimum working example:
\starttext
\startfrontmatter
\startchapter[title={Contents}]
\placelist[chapter]
\stopchapter
\completecontent
\stopfrontmatter
\startbodymatter
closed.
>
> $ mtxrun --script check filename.tex
> is something I learned from this list.
Many thanks for your reply, Bruce.
I knew this too, but this doesn’t fit my working conditions.
I’m afraid that it doesn’t work with sources with \input commands.
Contents of 'c.tex':
\st
t;
> Best regards: Otared
>
> > On 12 Apr 2022, at 19:14, Pablo Rodriguez via ntg-context cont...@ntg.nl> wrote:
> >
> > Hi Hans,
> >
> > I have a minimal sample that triggers a fatal error in ConTeXt LMTX
> > (current latest from 2022.04.1
e a minimal sample that triggers a fatal error in ConTeXt LMTX
> (current latest from 2022.04.11 19:27):
>
> \starttext
> \startfrontmatter
> \input zapf
> \stoptext
>
> This gives the following error message:
>
> mkiv lua stats > runtime: 0.386 seconds, 1 proces
Hi Hans,
I have a minimal sample that triggers a fatal error in ConTeXt LMTX
(current latest from 2022.04.11 19:27):
\starttext
\startfrontmatter
\input zapf
\stoptext
This gives the following error message:
mkiv lua stats > runtime: 0.386 seconds, 1 processed pages,
1 ship
text
> wrote:
> Hello Adam!
>
> Many thanks for your solution. — It works very well in your example and also
> in an extended version with \startfrontmatter..\stopfrontmatter
> \startbodymatter…\stopbodymatter. — Unfortunately It does not work to my wish
> in the actu
ello Adam!
>
> Many thanks for your solution. — It works very well in your example and
> also in an extended version with \startfrontmatter..\stopfrontmatter
> \startbodymatter…\stopbodymatter. — Unfortunately It does not work to my
> wish in the actual setup of my book. — I a
Hello Adam!
Many thanks for your solution. — It works very well in your example and also in
an extended version with \startfrontmatter..\stopfrontmatter
\startbodymatter…\stopbodymatter. — Unfortunately It does not work to my wish
in the actual setup of my book. — I am using now the solution
li Egger via ntg-context schrieb am 20.03.2022 um 17:05:
>> Hoi Wolfgang,
>>
>> I tested both variants (bodymatter and bodypart. The compilation runs
>> through, however without the thumb-picture in the margin and the metafun
>> error is in the log.
>
> 1. D
Willi Egger via ntg-context schrieb am 20.03.2022 um 17:05:
Hoi Wolfgang,
I tested both variants (bodymatter and bodypart. The compilation runs through,
however without the thumb-picture in the margin and the metafun error is in the
log.
1. Do you use \startfrontmatter and \startbodymatter
comments. — Tthe problem is, that this
>> thumb-picture should only be placed in the \startboydmatter..\stopbodymatter
>> sections. In the case of this book however there are the title pages and
>> quite some text including the TOC in the
>> \startfrontmatter..\stopfrontmatter. SO I e
li,
>
> How about invoking the command \setups{Thumb-pictures} between a \start \stop
> pair as in the following:
>
> \showframe
>
> \starttext
>
> \startfrontmatter
> \startchapter[title=Test A]
> \samplefile{knuth}
> \stopchapter
>
> \stopfr
pages and quite
some text including the TOC in the \startfrontmatter..\stopfrontmatter. SO I
end up with being forced to invoke the setups at the beginning of the
bodymatter.
Use sectionblockenvironment to set value which are only applied in the
frontmatter, bodymatter etc.
begin example
Hi Willi,
How about invoking the command \setups{Thumb-pictures} between a \start \stop
pair as in the following:
\showframe
\starttext
\startfrontmatter
\startchapter[title=Test A]
\samplefile{knuth}
\stopchapter
\stopfrontmatter
%\page[yes]
\start
\setups{Thumb-pictures
in the \startfrontmatter..\stopfrontmatter. SO I
end up with being forced to invoke the setups at the beginning of the
bodymatter.
Thanks!
Kind regards
Willi
> On 19 Mar 2022, at 16:52, Otared Kavian via ntg-context
> wrote:
>
> Hi Willi,
>
> Your test file works fine if I place
> \
\startfrontmatter. How can I identify what types
of preamble information would be causing an entire blank page to render
before the document even begins?
This minimum working example won't show me the error, but it does show I
simply have \starttext followed by my title and nothing is between
I created a book that strangely renders with an entirely blank page. There are
tons and tons of macros, in dozens of files defined before the document starts,
but the document itself starts quite simply with a title page set inside
\startfrontmatter. How can I identify what types of preamble
get repeated (not what I expected).
Here is a M(not)WD:
###begin
\setupinteraction[state=start]
\placebookmarks[chapter, section][chapter, section]
\setupinteractionscreen[option=bookmark]
\starttext
\startfrontmatter
\title{Contents}
\placelist[chapter]
\stopfrontmatter
\startfrontmatter
\rubbish
\stopfrontmatter
\startbodymatter
\rubbish
\stopbodymatter
\startappendices
\rubbish
\stopappendices
\startbackmatter
\rubbish
\stopbackmatter
\stoptext
I hope it helps,
Pablo
nment
\def\rubbish%
{\dorecurse{2}
{\chapter{Chapter}
\dorecurse{25}{\input knuth}}}
\starttext
\startfrontmatter
\rubbish
\stopfrontmatter
\startbodymatter
\rubbish
\stopbodymatter
\startappendices
\rubbish
\stopappendices
\startbackmatter
\rubbi
]
\setupcombinedlist [content] [list={part,parttext,chapter,chaptertext}]
\starttext
\startfrontmatter
\completecontent
\SectionPrequote{If you think good architecture is expensive, try bad
architecture\crlf
{\tf Brian Foote and Joseph Yoder}}
\startchapter[title={One}]
\dorecurse{7}{\input tufte \par \input
On 10/16/2021 7:34 PM, Fabrice Couvreur via ntg-context wrote:
Hi,
The latest version of lmtx does not allow me to compile the following
file although there was no problem before.
Thank you
Fabrice
\startproduct[expertes-manual]
\startfrontmatter
\setuppagenumbering
Hi,
The latest version of lmtx does not allow me to compile the following file
although there was no problem before.
Thank you
Fabrice
\startproduct[expertes-manual]
\startfrontmatter
\setuppagenumbering
[location=]
\definefont
[ChapterTextStyle]
[SansBold*default
lockenvironment[frontpart]
\setupuserpagenumber[numberconversion=romannumerals]
\setuppagenumber[number=1]
\stopsectionblockenvironment
\startsectionblockenvironment[bodypart]
\setuppagenumber[number=1]
\stopsectionblockenvironment
\starttext
\startfrontmatter
\dorecurse{25}{\null
conversionset [bodypart:chapternumber] [] [bodypartnumber->n]
> \defineconversionset [appendix:chapternumber] [] [appendixnumber->A]
>
> \setuphead
>[chapter]
>[sectionconversionset=chapternumber]
>
> \startsectionblockenvironment [frontpart]
>
>
number]
\startsectionblockenvironment [frontpart]
\defineprocessor [bodypartnumber] [left=Chapter~]
\defineprocessor [appendixnumber] [left=Appendix~]
\stopsectionblockenvironment
\starttext
\startfrontmatter
\completecontent
\stopfrontmatter
\startbodymatter
\chapter{Bodypart}
\stopbody
\startfrontmatter
\completecontent[label=section]
\stopfrontmatter
\startbodymatter
\chapter{Bodypart}
\stopbodymatter
\startappendices
\chapter{Appendix}
\stopappendices
\stoptext
But that does not show the labels in the TOC (trying it with LMTX and MKIV).
I must be doing something wrong.
Any hints
Hi Wolfgang,
Pablo's solution works, but I tried yours without success. Here are the
main lines of my project
begin product
\startproduct[terminale-manual]
\project[terminale-environment]
\startdocument
\startfrontmatter
...
\stopfrontmatter
\startbodymatter
\component
because you
can use the *component mode to check whether the parent file is a
product or a component.
begin product
\startproduct [*]
\environment [...]
\startfrontmatter
...
\stopfrontmatter
\startbodymatter
\component [...]
\stopbodymatter
\stopproduct
end product
begin
ctionblockenvironment[backpart]
\setupbodyfont[termes]
\stopsectionblockenvironment
\startsectionblockenvironment[appendix]
\setupbodyfont[helvetica]
\stopsectionblockenvironment
\starttext
\startfrontmatter
\input knuth\par
\stopfrontmatter
\startbodymatter
[pagella, 12pt]
\stopmode
\startmode[*backpart]
\setupbodyfont[termes, 12pt]
\stopmode
\starttext
\startfrontmatter
\input knuth\par
\stopfrontmatter
\startbodymatter
\input knuth\par
\stopbodymatter
\startbackmatter
\input knuth\par
\stopbackmatter
\stoptext
```
Is there something obvious
for your document.
begin document.tex
\startproduct [*]
\environment [document-environment]
\startdocument
% \startfrontmatter
%
% load components with table of contents, introduction etc.
%
% \stopfrontmatter
\startbodymatter
\component [document-xxx]
\stopbodymatter
\stopdocument
\startstandardmakeup
66 \title{Programmiertechnik 2}
67 \subsubject{Dr. Christoph Hintermüller}
68 >> \stopstandardmakeup
69 \startfrontmatter
70 \completecontent
71 %\placecombinedlist[content]
72 \stopfrontmatter
73 \startbodymatter
74
75
{#1}
\stopxmlsetups
\startxmlsetups xml:body
\xmlflush{#1}
\stopxmlsetups
\startxmlsetups xml:frontmatter
\startfrontmatter
\xmlflush{#1}
\stopfrontmatter
\stopxmlsetups
\startxmlsetups xml:bodymatter
\startbodymatter
\xmlflush{#1}
\stopbodymatter
\stopxmlset
[frontpart]
[number=yes]
\setuplist
[forword]
[label=forword,
width=2cm]
\setuplist
[chapter]
[label=chapter,
width=2cm]
\starttext
\startfrontmatter
\placelist [chapter,forword]
\startforword [] [author={A. u. thor}] \stopforword
\stopfrontmatter
\startbodymatter
\startchapter
]
\setupsectionblock
[frontpart]
[number=yes]
\setuplist
[forword]
[label=forword,
width=2cm]
\setuplist
[chapter]
[label=chapter,
width=2cm]
\starttext
\startfrontmatter
\placelist [chapter,forword]
\startforword [] [author={A. u. thor}] \stopforword
\stopfrontmatter
]
\starttext
\startfrontmatter
\placelist [chapter,forword]
\startforword [] [author={A. u. thor}] \stopforword
\stopfrontmatter
\startbodymatter
\startchapter [title=Chapter 1] [author={A. u. thor}] \stopchapter
\stopbodymatter
\stoptext
Wolfgang
le={Title},% subtitleone={Subtitle 1},% subtitletwo={Subtitle 2},% revnumber={Revision number}] \setupdocument [ manual={Course Manual}, title={Title}, subtitleone={Subtitle 1}, subtitletwo={Subtitle 2}, revnumber={Revision number}] \startfrontmatter \component fm-frontpage
}]
\setupdocument
[ manual={Course Manual},
title={Title},
subtitleone={Subtitle 1},
subtitletwo={Subtitle 2},
revnumber={Revision number}]
\startfrontmatter
\component fm-frontpage
\component fm-titlepage
\component fm-tableofcontents
\stopfrontmatter
\startbodymatter
Flamma The main product file==\environment env-WA \startproduct currentproduct % Document definitions\define\MyManual{Course Manual}\define\MyTitle{Title}\define\MySubtitleOne{Subtitle 1}\define\MySubtitleTwo{Subtitle 2}\define\MyRevnumber{Revision number} % Load frontmatter files\startfront
\MySubtitleTwo{Subtitle 2}
\define\MyRevnumber{Revision number}
% Load frontmatter files
\startfrontmatter
\component fm-frontpage
\component fm-titlepage
\component fm-tableofcontents
\stopfrontmatter
% Load bodymatter file
\startbodymatter
\setupbackgrounds
[leftpage]
[setups=pagenumber:left
\MyManual{Course Manual}\define\MyTitle{Title}\define\MySubtitleOne{Subtitle 1}\define\MySubtitleTwo{Subtitle 2}\define\MyRevnumber{Revision number} % Load frontmatter files\startfrontmatter \component fm-frontpage \component fm-titlepage \component fm-tableofcontents\stopfrontmatter % Load
> >> [page=no]
> >>
> >> to your document setups.
> >
> > How does this interact with \startsectionblockenvrironment? I found this on
> wiki.contextgarden.net/Table_of_Contents for suppressing header/footer on
> TOC. I
> did not specify frontmatter before
][align=middle,pagestate=start,doublesided=no]
\starttext
\startfrontmatter
\startmakeup[ToC]
\placecontent
\stopmakeup
\chapter{Preface}
\stopfrontmatter
\startbodymatter
\dorecurse{10}{\chapter{Foo}}
\stopbodymatter
\stoptext
I have
n my document I actually have
a chapter, and chapters start on the right page, even if I add page=no
to \setuppagenumbering:
\setuppagenumbering[alternative=doublesided,page=no]
\definemakeup[ToC][align=middle,pagestate=start,doublesided=no]
\starttext
\startfrontmatter
\star
agenumbering[alternative=doublesided]
\definemakeup[ToC][align=middle,pagestate=start]
\starttext
\startfrontmatter
\startmakeup[ToC]
\placecontent
\stopmakeup
\input{knuth}
\stopfrontmatter
\startbodymatter
\dorecurse{10}{\chapter{Foo}}
\st
}{flushleft}{#1}}}
\setuplist
[chapter]
[distance=0cm,
width=0cm,
margin=1cm,
numbercommand=\ChapterListNumbercommand]
\starttext
\startfrontmatter
\completecontent
\chapter{Preface}
\stopfrontmatter
\startbodymatter
\chapter{Introduction}
\chapter{Workflow}
\chapter{Input
On 2020-08-11, Pablo Rodriguez wrote:
> On 8/11/20 10:11 PM, Nicola wrote:
>> Consider this example:
>>
>> \definemakeup[toc][align=middle]
>> \setuppagenumbering[alternative=doublesided]
>> \starttext
>> \startfrontmatter
>>
On 8/11/20 10:11 PM, Nicola wrote:
> Consider this example:
>
> \definemakeup[toc][align=middle]
> \setuppagenumbering[alternative=doublesided]
> \starttext
> \startfrontmatter
> \startmakeup[toc]
> \placecontent
> \stopmakeup
Consider this example:
\definemakeup[toc][align=middle]
\setuppagenumbering[alternative=doublesided]
\starttext
\startfrontmatter
\startmakeup[toc]
\placecontent
\stopmakeup
%\setuppagenumber[number=1]
\startchapter[title
ether somehow?
Both a different setups for different purposes.
In my setup I tell ConTeXt not to force a page break when it encounters
\startfrontmatter or \stopfrontmatter because I insert the break with
\chapter.
With the sectionblockenvironment-environment you can set a list of
settings which
]
\definestructureconversionset[bodypart:pagenumber] [][numbers]
\starttext
\startfrontmatter
\page[even]
\startalignment[bottom,flushright]
Copyright © 2020 Author
\stopalignment
\start
\setuphead[chapter][after={}]
\completecontent
\stop
\page[odd]
\startchapter[title={Preface}]\input{knuth}\stopchapter
numbers?
Best,
Jack
\definestructureconversionset[frontpart:pagenumber][][romannumerals]
\definestructureconversionset[bodypart:pagenumber][][numbers]
\definemakeup[titlepage][align=middle]
\starttext
\startfrontmatter
\startmakeup[titlepage]
Title
\stopmakeup
test
\stopfrontmatter
> Fabrice
> >
> > \startproduct Seconde
> >
> > \environment modules
> > \environment specialite-style
> > \environment specialite-macros
> >
> > \startfrontmatter
> > \component specialite-titlepage
> > \component s
\environment specialite-macros
\startfrontmatter
\component specialite-titlepage
\component specialite-contents
\stopfrontmatter
\startbodymatter
\component chapter-1-seconde
\component chapter-2-seconde
\component chapter-3-seconde
\component chapter-4-seconde
\startfrontmatter
\component specialite-titlepage
\component specialite-contents
\stopfrontmatter
\startbodymatter
\component chapter-1-seconde
\component chapter-2-seconde
\component chapter-3-seconde
\component chapter-4-seconde
\stopbodymatter
\stopproduct
ddsym[t][t][unit={\sunit{second}}, description={Time}, group={latin}]
}
% Print the List of Symbols with \placelistofsymbols
\def\placelistofsymbols{\loadsymbols\ctxlua{userdata.placelistofsymbols()}}
\starttext
\startfrontmatter
\startsubject[title=Content]
\placecontent
\stopsubject
\starts
[section]
\hfill
\llap{\userpagenumber}
\stopsetups
\startsetups[text left]
\rlap{\userpagenumber}
\hfill
\sc \getmarking[chapter]
\hfill
\llap{}
\stopsetups
\startfrontmatter
Hello
\completecontent
\stopfrontmatter
\startbodymatter
\startchapter[title=yay]
\startsection[title=wow]
\startsubsection
[section]
\hfill
\llap{\userpagenumber}
\stopsetups
\startsetups[text left]
\rlap{\userpagenumber}
\hfill
\sc \getmarking[chapter]
\hfill
\llap{}
\stopsetups
\startfrontmatter
Hello
\completecontent
\stopfrontmatter
\startbodymatter
\startchapter[title=yay]
\startsection[title=wow]
\startsubsection[title
pcombinedlist[content][level=1]
\setupexternalfigures[directory={images}]
\startdocument[
metadata:title={MkIV Context Notes},
metadata:subtitle={},
metadata:subject={MkIV Context},
affiliation=Context]
\starttext
\startfrontmatter
\title{MkIV \CONTEXT\ Notes.}
\startcolumns[n=2]
\input zapf
\st
Jeroen schrieb am 29.09.2019 um 20:36:
This is the main file.
Neither minimal nor complete and \stopdocument is also missing.
\environment mkivcnotesenv
\startdocument
[metadata:subject={MkIV Context},
affiliation=Context]
\starttext
\startfrontmatter
\input{frontpage.tex}
\stopfrontmatter
This is the main file.
\environment mkivcnotesenv
\startdocument
[metadata:subject={MkIV Context},
affiliation=Context]
\starttext
\startfrontmatter
\input{frontpage.tex}
\stopfrontmatter
\startbodymatter
\section{Introduction}
\dorecurse{10}{input knuth}
\stopbodymatter
\startappendices
that,
> > including a table of contents. This has worked fine:
> >
> > \startproduct prd-pr23
> >
> > \startfrontmatter
> > \setuppagenumber[stop]
> > \component pr23-cover_front_web
> > \component blank.tex
> > \component c-contents
>
Mari Voipio schrieb am 02.09.2019 um 13:07:
Hello!
I have a document where I want the page numbers to start from the
first page of chapter one. There's bunch of stuff before that,
including a table of contents. This has worked fine:
\startproduct prd-pr23
\startfrontmatter
\setuppagenumber
[preference]}]
\setuplist[section][width=10mm, style=,textstyle=\ss,after={\blank[preference]}]
\setuplist[subsection][style=,textstyle={\ss}]
%
\startfrontmatter
\title{Contents}
\placelist[chapter,title]
\stopfrontmatter
\startbodymatter
\title{First}
\page
s."
(Jeffrey 'The Dude' Lebowski)
> On 7 Nov 2018, at 00:03, Tomas Hala wrote:
>
> Hi Andrea,
>
> try this:
>
> %%%%
> \starttext
>
> \startfrontmatter
> \placecontent
> \page
> \chapter{Foreword}
> \stopfrontmatter
>
> \star
Hi Andrea,
try this:
\starttext
\startfrontmatter
\placecontent
\page
\chapter{Foreword}
\stopfrontmatter
\startbodymatter
\chapter{Introduction}
\stopbodymatter
\startbackmatter
\chapter{Something at the end}
\stopbackmatter
\stoptext
Best wishes,
Tomáš
]
\startsectionblockenvironment[bodypart]
\setuphead[chapter][style=\em]
\stopsectionblockenvironment
\starttext
\startfrontmatter
\chapter{Introduction}
\stopfrontmatter
\startbodymatter
\chapter{Chapter}
\stopbodymatter
\stoptext
But wasn’t there a command similar
]
\setuphead[chapter][style=\em]
\stopsectionblockenvironment
\starttext
\startfrontmatter
\chapter{Introduction}
\stopfrontmatter
\startbodymatter
\chapter{Chapter}
\stopbodymatter
\stoptext
But wasn’t there a command similar to the following one
[chapter][style=\em]
\stopsectionblockenvironment
\starttext
\startfrontmatter
\chapter{Introduction}
\stopfrontmatter
\startbodymatter
\chapter{Chapter}
\stopbodymatter
\stoptext
But wasn’t there a command similar to the following one for such purposes
]
\stopsectionblockenvironment
\starttext
\startfrontmatter
\chapter{Introduction}
\stopfrontmatter
\startbodymatter
\chapter{Chapter}
\stopbodymatter
\stoptext
But wasn’t there a command similar to the following one for such purposes?
\setuphead[bodypart:chapter][style=\em]
I remember
}]
\setuplist[section][width=10mm, style=,textcommand={\ss }]
\showframe
\startfrontmatter
\completecontent
\page[empty]
\stopfrontmatter
\startbodymatter
\dorecurse{9}
{\chapter{Ch \recurselevel}
\dorecurse{8}
{\section{Section \recurselevel}}
}
\stopbodymatter
\setupsectionblock[backpart] [page=]
\setupsectionblock[appendix] [page=]
\definepagebreak[firstpagebreak][yes,header,footer,right]
\setuphead[chapter][page=firstpagebreak]
\setuppagenumbering[alternative=doublesided]
\starttext
\startfrontmatter
\chapter{front}
\stopfrontmatter
A reasonable approach to a Context file includes preliminary information before
the first printed page. My basic master file looks like this :
\input variables.tex\relax
\input layout.tex\relax
\input macros.tex\relax
\input fonts.tex\relax
\starttext\relax
%\showlayout
\startfrontmatter
1 - 100 of 516 matches
Mail list logo