The Marvell 88SE9123/9128 are not supported by ahci(7D) driver yet.
Regards,
Xiaoyu
On 07/02/2010 09:59 AM, Jean-Paul Rivet wrote:
Hi All,
I've required two additional SATA ports for my home zfs server and was tempted
by the post that the Marvell 88SE9128 worked well with OpenSolaris:
http://opensolaris.org/jive/thread.jspa?threadID=129352&tstart=0
The actual card I am using is a HighPoint Rocket 620A which is a Marvell
88SE9128 implementation.
The HBA is identified correctly and the AHCI driver is loaded according to
Device Driver Utility.
However the disks cannot be presented to the OS:
j...@charger:~$ cfgadm -l
Ap_Id Type Receptacle Occupant Condition
sata4/0::dsk/c9t0d0disk connectedconfigured ok
sata4/1::dsk/c9t1d0disk connectedconfigured ok
sata5/0::dsk/c10t0d0 disk connectedconfigured ok
sata5/1::dsk/c10t1d0 disk connectedconfigured ok
sata6/0unknown connectedunconfigured unknown
sata6/1unknown connectedunconfigured unknown
sata6/2sata-portemptyunconfigured ok
sata6/3sata-portemptyunconfigured ok
sata6/4sata-portemptyunconfigured ok
sata6/5sata-portemptyunconfigured ok
sata6/6sata-portemptyunconfigured ok
sata6/7sata-portemptyunconfigured ok
...
sata6/0 and 6/1 is where they should appear above. The following occurs during
boot:
Jul 2 10:52:59 charger ahci: [ID 405770 kern.info] NOTICE: ahci0: hba AHCI
version = 1.20
Jul 2 10:52:59 charger pcplusmp: [ID 805372 kern.info] pcplusmp:
pciclass,010601 (ahci) instance 0 irq 0x19 vector 0x42 ioapic 0xff intin 0xff
is bound to cpu 1
Jul 2 10:54:06 charger ahci: [ID 517647 kern.warning] WARNING: ahci0: watchdog
port 0 satapkt 0xff01c826fa88 timed out
Jul 2 10:54:28 charger ahci: [ID 860969 kern.warning] WARNING: ahci0:
ahci_port_reset port 0 the device hardware has been initialized and the
power-up diagnostics failed
Jul 2 10:55:33 charger ahci: [ID 517647 kern.warning] WARNING: ahci0: watchdog
port 1 satapkt 0xff01c826fa88 timed out
Jul 2 10:55:55 charger ahci: [ID 860969 kern.warning] WARNING: ahci0:
ahci_port_reset port 1 the device hardware has been initialized and the
power-up diagnostics failed
I've tested the card under another OS and the disks were detected correctly.
I've since noticed the AHCI manual entry lists which cards/chipsets are
supported and this one is not listed.
My questions are:
a) should this card work?
b) if so, what do I need to do differently?
Cheers, JP
___
storage-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/storage-discuss
