From: Peter Meerwald <pme...@pmeerw.net>
If doing a pure write with register address and data (not a read/write
combo transfer), we don't set the initial transfer length properly which
ends up causing only the register address to be transferred.
While we're here, fix the i2c_write() parameter description of the buffer.
Signed-off-by: Peter Meerwald <pme...@pmeerw.net>
Signed-off-by: Mike Frysinger <vap...@gentoo.org>
---
drivers/i2c/bfin-twi_i2c.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/bfin-twi_i2c.c b/drivers/i2c/bfin-twi_i2c.c
index cfe55cd..e790634 100644
--- a/drivers/i2c/bfin-twi_i2c.c
+++ b/drivers/i2c/bfin-twi_i2c.c
@@ -164,7 +164,7 @@ static int i2c_transfer(uchar chip, uint addr, int alen,
uchar *buffer, int len,
/* prime the pump */
if (msg.alen) {
- len = msg.alen;
+ len = (msg.flags & I2C_M_COMBO) ? msg.alen : msg.alen + len;
debugi("first byte=0x%02x", *msg.abuf);
bfin_write_TWI_XMT_DATA8(*(msg.abuf++));
--msg.alen;
@@ -275,7 +275,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar
*buffer, int len)
* @chip: i2c chip addr
* @addr: memory (register) address in the chip
* @alen: byte size of address
- * @buffer: buffer to store data read from chip
+ * @buffer: buffer holding data to write to chip
* @len: how many bytes to write
* @return: 0 on success, non-0 on failure
*/
--
1.6.3.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
