Re: [XFree86] XFree86 4.3.0 (siliconmotion) vs Gateway Solo 2550(LynxEM)

2003-03-22 Thread Syahrul Sazli Shaharir 
Mr Hofmann,

On Thu, 20 Mar 2003, Johannes Hofmann wrote:

> same problem here (Thinkpad i1200, FreeBSD 5.0 current).
>
> As a workaround I disabled xv. See attached patch.

I tested your patch, and it works! Thanks a bunch for sharing... just
curious, what OS are you using? (the question leads to: is this problem
specific to siliconmotion driver or are there any other external
influences contributing to the problem?)

Thanks again...

--sazli
cd /open/source; make world
http://pgp.mit.edu:11371/pks/lookup?search=0x382141B4&op=index

___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

[XFree86] XFree86 4.3.0 (siliconmotion) vs Gateway Solo 2550 (LynxEM)

2003-03-20 Thread Johannes Hofmann 
Hi,

same problem here (Thinkpad i1200, FreeBSD 5.0 current).

As a workaround I disabled xv. See attached patch.

Regards,
Johannes Hofmann


--- programs/Xserver/hw/xfree86/drivers/siliconmotion/smi_video.c.orig  Thu Mar 20 
22:51:02 2003
+++ programs/Xserver/hw/xfree86/drivers/siliconmotion/smi_video.c   Wed Mar 19 
19:52:43 2003
@@ -623,6 +623,8 @@
 }
 }
 
+numAdaptors = 0;
+
 if (numAdaptors != 0)
 {
   DEBUG((VERBLEV, "ScreenInit %i\n",numAdaptors));


___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

[XFree86] XFree86 4.3.0 (siliconmotion) vs Gateway Solo 2550 (LynxEM)

2003-03-14 Thread Syahrul Sazli Shaharir 
Hi,

OS: FreeBSD 5.0-RELEASE.
Recently upgraded to XFree86 4.3.0 from FreeBSD ports tree. X server fails
to start. Previous version (4.2.x) works perfectly. Symptoms:-

1. Default xf86cfg-generated XF86Config (UseBIOS on): X hangs with blank
screen, VTY also fails, had to connect remotely and kill the XFree86
process. In XFree86.0.log, it seems to be stuck in an infinite loop here:-

(II) Silicon Motion(0): Current mode 0x00.
(II) Silicon Motion(0):   SMI_GEReset called from smi_driver.c line 1559
(II) Silicon Motion(0):   SMI_GEReset called from smi_accel.c line 263
(II) Silicon Motion(0):   SMI_GEReset called from smi_accel.c line 263
(II) Silicon Motion(0):   SMI_GEReset called from smi_accel.c line 263
. last line repeats infinitely

UseBIOS on didn't work in previous version, so I don't worry about this
too much.

2. With UseBIOS "off": This works in XFree86 4.2.x, but now fails with a
"Fatal server error" (signal 11). Attached is the XF86Config as well as
Xfree86.0.log.

Workarounds / patches? Thanks for your help! :)

--sazli
cd /open/source; make world
http://pgp.mit.edu:11371/pks/lookup?search=0x382141B4&op=indexSection "ServerLayout"
Identifier "Layout0"
Screen  0  "Screen0" 0 0
InputDevice"Keyboard0" "CoreKeyboard"
InputDevice"Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "Module"
# Load "freetype"
# Load "xtt"
Load  "extmod"
Load  "glx"
Load  "dri"
Load  "dbe"
Load  "record"
Load  "xtrap"
Load  "type1"
Load  "speedo"
EndSection

Section "InputDevice"
Identifier  "Mouse0"
Driver  "mouse"
Option  "Protocol" "Auto"
Option  "Emulate3Buttons"
Option  "Device" "/dev/sysmouse"
EndSection

Section "InputDevice"
Identifier  "Keyboard0"
Driver  "keyboard"
Option  "XkbModel" "pc101"
Option  "XkbLayout" "us"
EndSection

Section "Monitor"
Identifier   "Monitor0"
HorizSync31.5 - 35.1
VertRefresh  50.0 - 70.0
EndSection

Section "Device"
Identifier  "Card0"
Driver  "siliconmotion"
ChipSet "LynxEM"
Card"siliconmotion LynxEM"
Option  "UseBIOS" "off"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor"Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes"800x600"
EndSubSection
EndSection


XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: FreeBSD 5.0 i386 [ELF] 
Build Date: 14 March 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
 (++) from command line, (!!) notice, (II) informational,
 (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sat Mar 15 08:50:18 2003
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbModel" "pc101"
(**) XKB: model: "pc101"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Mouse0"
(==) FontPath set to 
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9

(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on freebsd
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8000384c, mode1Res1 = 0x8000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7190 card 107b,2550 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,