Re: [gentoo-user] bitcoin-qt, openssl and the bindist USE flag

On Saturday, 8 April 2017 21.15.05 CEST, Mick wrote: Did you try setting USE="-bindist" and then emerging the three packages suggested by portage above? net-misc/openssh dev-qt/qtnetwork dev-libs/openssl Thanks for the suggestion. I chose to enable +bindist globally in make.con

Re: [gentoo-user] openssl: "-bindist" fights "bindist"...and me inbetween

; ^^^ > dev-libs/openssl:0[bindist] required by > (dev-qt/qtnetwork-5.7.1:5/5.7::gentoo, installed) >^^^ > > Is there any way around this? Disable the bindist flag on openssh and qtnetwork -- Simon Thelen

Re: problems with slack and zoom: Was: [gentoo-user] ALSA wizard...

pulls in lots of unstable qt for you, I'd try to figure out why - but obviously only if you still need/want to try zoom. > Yes, that's about it. But one of them is dev-qt/qtnetwork. It wants to install 5.14.2 (unstable), and I have the stable version 5.14.1. Odd. zoom-3.5.392530.0421 is

Re: [gentoo-user] openssl: "-bindist" fights "bindist"...and me inbetween

uild scheduled for merge) pulled in > by > dev-libs/openssl:0[bindist=] required by > (dev-qt/qtnetwork-5.7.1:5/5.7::gentoo, ebuild scheduled for merge) > > >

Re: [gentoo-user] openssl: "-bindist" fights "bindist"...and me inbetween

with > > >=dev-libs/openssl-0.9.8f:0[bindist] required by > > (net-misc/openssh-7.4_p1:0/0::gentoo, installed) > > ^^^ > > dev-libs/openssl:0[bindist] required by > > (dev-qt/qtnetwork-5.7.1:5/5.7::gentoo, installed)

Re: [gentoo-user] openssl: "-bindist" fights "bindist"...and me inbetween

2k:0/0::gentoo, ebuild scheduled for merge) >>> conflicts with >>> >=dev-libs/openssl-0.9.8f:0[bindist] required by >>> (net-misc/openssh-7.4_p1:0/0::gentoo, installed) >>> ^^^ >>> dev-libs/openssl:0[bindi

Re: [gentoo-user] conflict with same package, same USE

On Fri, 2 Jun 2017 10:55:51 +0200 Hogren <hog...@iiiha.com> wrote: > dev-libs/openssl:0 > > (dev-libs/openssl-1.0.2k:0/0::gentoo, ebuild scheduled for merge) > pulled in by > dev-libs/openssl:0[bindist=] required by > (dev-qt/qtnetwork-5.6.2:5/5.6::gentoo, eb

Re: [gentoo-user] conflict with same package, same USE

11:34, Kent Fredric wrote: > On Fri, 2 Jun 2017 10:55:51 +0200 > Hogren <hog...@iiiha.com> wrote: > >> dev-libs/openssl:0 >> >> (dev-libs/openssl-1.0.2k:0/0::gentoo, ebuild scheduled for merge) >> pulled in by >> dev-libs/openssl:0[bindist=] requi

Re: [gentoo-user] bitcoin-qt, openssl and the bindist USE flag

ot; 0 KiB > [ebuild R] net-misc/openssh-7.5_p1-r1::gentoo USE="X bindist* hpn > pam pie ssl -X509 -audit -debug -kerberos -ldap -ldns -libedit -libressl > -livecd -sctp (-selinux) -skey -ssh1 -static {-test}" 0 KiB > [ebuild R] dev-qt/qtnetwork-5.7.1:5/5.7::gentoo

Re: problems with slack and zoom: Was: [gentoo-user] ALSA wizard...

unstable qt for you, I'd try to figure out why - but obviously only if > you still need/want to try zoom. > Yes, that's about it. But one of them is dev-qt/qtnetwork. It wants to install 5.14.2 (unstable), and I have the stable version 5.14.1. Regards Jorge

[gentoo-user] nodejs and qtnetwork = conflict on bindist openssl USE flag

installed) (dev-libs/openssl-1.0.2k:0/0::gentoo, ebuild scheduled for merge) pulled in by dev-libs/openssl:0[bindist=] required by (dev-qt/qtnetwork-5.6.2:5/5.6::gentoo, ebuild scheduled

Re: [gentoo-user] nodejs and qtnetwork = conflict on bindist openssl USE flag

; > >=dev-libs/openssl-0.9.8f:0[bindist=] required by > (net-misc/openssh-7.3_p1-r7:0/0::gentoo, installed) > > > > > (dev-libs/openssl-1.0.2k:0/0::gentoo, ebuild scheduled for merge) > pulled in by > dev-libs/openssl:0[bindist=] required by > (de

Re: [gentoo-user] nodejs and qtnetwork = conflict on bindist openssl USE flag

>=dev-libs/openssl-1.0.2g:0/0=[-bindist] required by >> (net-libs/nodejs-7.10.0:0/0::gentoo, installed) >> >> >> >> >=dev-libs/openssl-0.9.8f:0[bindist=] required by >> (net-misc/openssh-7.3_p1-r7:0/0::gentoo, installed) >> >> ^^^^ >> >>

[gentoo-user] openssl: "-bindist" fights "bindist"...and me inbetween

(dev-qt/qtnetwork-5.7.1:5/5.7::gentoo, installed) ^^^ Is there any way around this? Thanks a lot for any help in advance! Cheers Meino

Re: [gentoo-user] printing pdfs

On Fri, May 29, 2020, at 01:04, james wrote: > (dev-qt/qtcore-5.15.0:5/5.15.0::gentoo, ebuild scheduled for merge) > USE="icu -debug -old-kernel (-systemd) -test" ABI_X86="(64)" conflicts with > ~dev-qt/qtcore-5.14.2:5/5.14.2= required by > (dev-qt/qtnetwork-

Re: [gentoo-user] conflict with same package, same USE

;python2_7 python3_4 (-pypy) > (-pypy3) (-python3_5) (-python3_6)" > [ebuild N ] dev-qt/qtnetwork-5.6.2 USE="bindist ssl -connman > -debug -libproxy -networkmanager {-test}" > [ebuild U ] sys-libs/ldb-1.1.29-r1 [1.1.26] USE="ldap%* python%*" > [ebuild R

[gentoo-user] conflict with same package, same USE

_X86="(64) -32 (-x32)" PYTHON_TARGETS="python2_7 python3_4 (-pypy) (-pypy3) (-python3_5) (-python3_6)" [ebuild N ] dev-qt/qtnetwork-5.6.2 USE="bindist ssl -connman -debug -libproxy -networkmanager {-test}" [ebuild U ] sys-libs/ldb-1.1.29-r1 [1.1.26] USE="ldap%

[gentoo-user] media-video/mkvtoolnix-15.0.0-r1 fails to compile [solved]

include/qt5 -I/usr/include/qt5/QtNetwork -I/usr/include/qt5 -I/usr/include/qt5/QtConcurrent -I/usr/include/qt5 -I/usr/include/qt5/QtCore -I/usr/include/qt5 -I/usr/include -march=native -O2 -pipe -I. -Ilib -Ilib/avilib-0.6.10 -Isrc -Ilib/utf8-cpp/source -c -MMD -MF ./rake.d/dependency.d/tmp/sr

[gentoo-user] bitcoin-qt, openssl and the bindist USE flag

ldap -ldns -libedit -libressl -livecd -sctp (-selinux) -skey -ssh1 -static {-test}" 0 KiB [ebuild R] dev-qt/qtnetwork-5.7.1:5/5.7::gentoo USE="bindist* ssl -connman -debug -libproxy -networkmanager {-test}" 0 KiB [ebuild R] media-libs/mesa-17.0.3::gentoo USE=&quo

Re: [gentoo-user] conflict with same package, same USE

] sys-devel/binutils-2.25.1-r1 > > [ebuild U ] sys-libs/talloc-2.1.9 [2.1.5] > > [ebuild U ] sys-libs/tdb-1.3.13 [1.3.8] > > [ebuild U ] sys-libs/tevent-0.9.31-r1 [0.9.28] > > [ebuild N ] dev-python/subunit-1.2.0-r1 USE="-static-libs > > {-test}&

Re: [gentoo-user] printing pdfs

e currenly blocked (will not update) qt: U ~] dev-qt/qtcore-5.15.0 [5.14.2] U ~] dev-qt/qtxml-5.15.0 [5.14.2] U dev-qt/qtnetwork-5.15.0 [5.14.2] USE="-libressl%" U ~] dev-qt/qttest-5.15.0 [5.14.2] U ~] dev-qt/qtdbus-5.15.0 [5.14.2] U ~] dev-qt/qtgui-5.15.0 [5.14.2] U ~] dev-qt/qtx11extr

Re: [gentoo-user] printing pdfs

nd many qt codes. Perhaps better these are currenly blocked (will not update) qt: U ~] dev-qt/qtcore-5.15.0 [5.14.2] U ~] dev-qt/qtxml-5.15.0 [5.14.2] U dev-qt/qtnetwork-5.15.0 [5.14.2] USE="-libressl%" U ~] dev-qt/qttest-5.15.0 [5.14.2] U ~] dev-qt/qtdbus-5.15.0 [5.14.2] U ~] dev-qt/qtg

[gentoo-user] Impossible to compile PyQt

'QWindowsXPStyle' QScintilla 1.5.1 is being used. Checking to see if the qtcanvas module should be built... Checking to see if the qtnetwork module should be built... Checking to see if the qttable module should be built... Checking to see if the qtxml module should be built... Checking to see

Re: [gentoo-user] openssl: "-bindist" fights "bindist"...and me inbetween

-1.0.2k:0/0::gentoo, ebuild >>> scheduled for merge) conflicts with >>>> =dev-libs/openssl-0.9.8f:0[bindist] required by >>>> (net-misc/openssh-7.4_p1:0/0::gentoo, installed) >>> ^^^ dev-libs/openssl:0[bindist] required by >>> (dev-qt/qtnetwork-5.7.

[gentoo-user] Re: dev-qt/qtdeclarative fails to build

dgets xml -debug > (-gles2) -localstorage {-test}" > > > emerge --info output and build.log are attached. > > Any ideas? Thanks! > > -- > Regards, > Christoph > This is probably bug #623566. Based on this output, try rebuilding qtcore, qtgui and qtnetwork then try qtdeclarative again.

Re: [gentoo-user] handling a slot collision (for telegram) [SOLVED]

Thanks to the suggestions I got from the list, I was able to update QT as follows: emerge -vu dev-qt/qtgui dev-qt/qtx11extras dev-qt/qtopengl dev-qt/qtprintsupport dev-qt/qtwidgets dev-qt/qtxml dev-qt/linguist-tools dev-qt/qtnetwork dev-qt/qtsvg dev-qt/qtcore and complete the installation

Re: [gentoo-user] slot conflict for the same package: how to add a USE flag?

On 5/20/20 12:06 PM, n952162 wrote: The command was: emerge -vu dev-qt/qtgui dev-qt/qtx11extras dev-qt/qtopengl dev-qt/qtprintsupport dev-qt/qtwidgets dev-qt/qtxml dev-qt/linguist-tools dev-qt/qtnetwork dev-qt/qtsvg dev-qt/qtcore The output to that is attached. I tried just emerging zlib

Re: [gentoo-user] slot conflict for the same package: how to add a USE flag?

On 05/20/20 21:24, Daniel Frey wrote: On 5/20/20 12:06 PM, n952162 wrote: The command was: emerge -vu dev-qt/qtgui dev-qt/qtx11extras dev-qt/qtopengl dev-qt/qtprintsupport dev-qt/qtwidgets dev-qt/qtxml dev-qt/linguist-tools dev-qt/qtnetwork dev-qt/qtsvg dev-qt/qtcore The output

Re: [gentoo-user] printing pdfs

ile-2.4.1_p20171024 > dev-qt/qtmultimedia-5.14.2 > dev-qt/qtnetwork-5.14.2 > dev-qt/qtopengl-5.14.2 > dev-qt/qtpositioning-5.14.2 > dev-qt/qtprintsupport-5.14.2 > dev-qt/qtquickcontrols-5.14.1 > dev-qt/qtscript-5.14.2 > dev-qt/qtsingleapplication-2.6.1_p20171024 > dev-qt

Re: [gentoo-user] printing pdfs

or example: >> >> $ eix --category dev-qt --installed --compact >> > > 35 matches. Yes I run lxde and many qt codes. > > Perhaps better these are currenly blocked (will not update) qt: > > U ~] dev-qt/qtcore-5.15.0 [5.14.2] >  U ~] dev-qt/qtxml-5.15.0 [5.14.

Re: [gentoo-user] slot conflict for the same package: how to add a USE flag?

:36 CEST, Daniel Frey wrote: On 5/20/20 12:06 PM, n952162 wrote: The command was: emerge -vu dev-qt/qtgui dev-qt/qtx11extras dev-qt/qtopengl dev-qt/qtprintsupport dev-qt/qtwidgets dev-qt/qtxml dev-qt/linguist-tools dev-qt/qtnetwork dev-qt/qtsvg dev-qt/qtcore The output to that is attached. I

Re: [gentoo-user] slot conflict for the same package: how to add a USE flag?

n 5/20/20 12:06 PM, n952162 wrote: >>> The command was: >>> >>> emerge -vu dev-qt/qtgui dev-qt/qtx11extras dev-qt/qtopengl >>> dev-qt/qtprintsupport dev-qt/qtwidgets dev-qt/qtxml >>> dev-qt/linguist-tools dev-qt/qtnetwork dev-qt/qtsvg dev-qt/qtcore >>> >>

Re: [gentoo-user] slot conflict for the same package: how to add a USE flag?

as dev-qt/qtopengl >>>> dev-qt/qtprintsupport dev-qt/qtwidgets dev-qt/qtxml >>>> dev-qt/linguist-tools dev-qt/qtnetwork dev-qt/qtsvg dev-qt/qtcore >>>> >>>> The output to that is attached. >>>> >>>> I tried just emerging zlib with the

Re: [gentoo-user] slot conflict for the same package: how to add a USE flag?

On 20 May 2020 21:24:36 CEST, Daniel Frey wrote: >On 5/20/20 12:06 PM, n952162 wrote: >> The command was: >> >> emerge -vu dev-qt/qtgui dev-qt/qtx11extras dev-qt/qtopengl >> dev-qt/qtprintsupport dev-qt/qtwidgets dev-qt/qtxml >> dev-qt/linguist-tools dev-qt/qtn

Re: [gentoo-user] printing pdfs

tches. Yes I run lxde and many qt codes. Perhaps better these are currenly blocked (will not update) qt: U ~] dev-qt/qtcore-5.15.0 [5.14.2] �U ~] dev-qt/qtxml-5.15.0 [5.14.2] U dev-qt/qtnetwork-5.15.0 [5.14.2] USE="-libressl%" U ~] dev-qt/qttest-5.15.0 [5.14.2] U ~] dev-qt/qtdbus-5.15.

[gentoo-user] dev-python/PyQt4-4.9.2 requires SIP v4.13.3 or later

-packages --sipdir=/usr/share/sip --assume-shared --no-timestamp --qsci-api --enable=QtCore --enable=QtNetwork --enable=QtScript --enable=QtXml --enable=QtGui --enable=QtDesigner --enable=QtScriptTools --enable=QtTest --enable=QtDBus --enable=QtDeclarative --enable=QtOpenGL --enable=phonon --enable=QtSql

Re: [gentoo-user] Qt5

/qtdiag-5.3.2* =dev-qt/qtgraphicaleffects-5.3.2* =dev-qt/qtgui-5.3.2* =dev-qt/qthelp-5.3.2* =dev-qt/qtimageformats-5.3.2* =dev-qt/qtmultimedia-5.3.2* =dev-qt/qtnetwork-5.3.2* =dev-qt/qtopengl-5.3.2* =dev-qt/qtpaths-5.3.2* =dev-qt/qtpositioning-5.3.2* =dev-qt/qtprintsupport-5.3.2* =dev-qt/qtquick1-5.3.2

Re: [gentoo-user] printing pdfs

t/qtmultimedia-5.14.2 dev-qt/qtnetwork-5.14.2 dev-qt/qtopengl-5.14.2 dev-qt/qtpositioning-5.14.2 dev-qt/qtprintsupport-5.14.2 dev-qt/qtquickcontrols-5.14.1 dev-qt/qtscript-5.14.2 dev-qt/qtsingleapplication-2.6.1_p20171024 dev-qt/qtsql-5.14.2 dev-qt/qtsvg-5.14.1 dev-qt/qttest-5.14.2 dev-qt/qtwayland

Re: [gentoo-user] Master PDF Editor - version 4, without watermark

eg-turbo media-libs/libpng media-libs/tiff x11-libs/libX11 x11-libs/libXau x11-libs/libxcb x11-libs/libXdmcp x11-libs/libXext >=dev-qt/qtsvg-5.4:5 >=dev-qt/qtnetwork-5.4:5 >=dev-qt/qtgui-5.4:5 &

Re: [gentoo-user] Gpgme oddity

.14.11_pre20160211/work/kmail-4.14.11_pre20160211/kaddressbookgrantlee -I/usr/include/KDE -I/usr/include/qt4/QtXmlPatterns -I/usr/include/qt4/QtXml - I/usr/include/qt4/QtWebKit -I/usr/include/qt4/QtUiTools - I/usr/include/qt4/QtTest -I/usr/include/qt4/QtSvg -I/usr/include/qt4/QtSql - I/usr/include

Re: [gentoo-user] Back to bussiness with freecad ... but ...

-DQT_UITOOLS_LIB - > DQT_WEBKIT_LIB -DQT_XML_LIB -D_OCC64 -I/var/tmp/portage/media- > gfx/freecad-0.16/work/freecad-0.16_build -isystem /usr/include/qt4 -isystem > /usr/include/qt4/QtOpenGL -isystem /usr/include/qt4/QtSvg -isystem > /usr/include/qt4/QtUiTools -isystem /usr/include/qt4/Qt

Re: [gentoo-user] Back to bussiness with freecad ... but ...

GL -isystem /usr/include/qt4/QtSvg -isystem /usr/include/qt4/QtUiTools -isystem /usr/include/qt4/QtWebKit -isystem /usr/include/qt4/QtGui -isystem /usr/include/qt4/QtXml -isystem /usr/include/qt4/QtNetwork -isystem /usr/include/qt4/QtCore - I/var/tmp/portage/media-gfx/freecad-0.16/work/freecad

Re: [gentoo-user] slot conflict for the same package: how to add a USE flag?

v-qt/qtwidgets dev-qt/qtxml > >> dev-qt/linguist-tools dev-qt/qtnetwork dev-qt/qtsvg dev-qt/qtcore > >> > >> The output to that is attached. > >> > >> I tried just emerging zlib with the static-libs USE flag ... that log is > >> also attached. &g

Re: [gentoo-user] slot conflict for the same package: how to add a USE flag?

orignally responded to, at 21:06 (my time), I'd included this and attached the full log: emerge -vu dev-qt/qtgui dev-qt/qtx11extras dev-qt/qtopengl dev-qt/qtprintsupport dev-qt/qtwidgets dev-qt/qtxml dev-qt/linguist-tools dev-qt/qtnetwork dev-qt/qtsvg dev-qt/qtcore Again, I think attaching the log

Re: [gentoo-user] printing pdfs

ing functions [?] dev-qt/qtmultimedia (5.14.2(5/5.14)@05/24/2020 -> (~)5.14.1(5/5.14)^t): Multimedia (audio, video, radio, camera) library for the Qt5 framework [?] dev-qt/qtnetwork (5.14.2(5/5.14)@05/15/2020 -> (~)5.14.1(5/5.14)^t): Network abstraction library for the Qt5 framework [?] dev-q

Re: [gentoo-user] slot conflict for the same package: how to add a USE flag?

The command was: emerge -vu dev-qt/qtgui dev-qt/qtx11extras dev-qt/qtopengl dev-qt/qtprintsupport dev-qt/qtwidgets dev-qt/qtxml dev-qt/linguist-tools dev-qt/qtnetwork dev-qt/qtsvg dev-qt/qtcore The output to that is attached. I tried just emerging zlib with the static-libs USE flag

[gentoo-user] Update to dev-libs/icu-51.1 results in borked Dolphin

-I/usr/include/qt4/QtUiTools - I/usr/include/qt4/QtTest -I/usr/include/qt4/QtSvg -I/usr/include/qt4/QtSql - I/usr/include/qt4/QtScriptTools -I/usr/include/qt4/QtScript - I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtNetwork - I/usr/include/qt4/QtMultimedia -I/usr/include/qt4/QtDesigner - I/usr

Re: [gentoo-user] Update to dev-libs/icu-51.1 results in borked Dolphin

/QtOpenGL -I/usr/include/qt4/QtNetwork - I/usr/include/qt4/QtMultimedia -I/usr/include/qt4/QtDesigner - I/usr/include/qt4/QtDeclarative -I/usr/include/qt4/QtDBus - I/usr/include/qt4/Qt3Support -I/usr/include/qt4/QtGui - I/usr/include/qt4/QtCore -I/usr/include/qt4/Qt - I/usr/share/qt4/mkspecs

Re: [gentoo-user] switch to profile 17.0 complete, completely painless

s" RDEPEND=" app-arch/snappy:= dev-libs/glib:2 dev-libs/nspr dev-libs/nss ~dev-qt/qtcore-${PV} ~dev-qt/qtdeclarative-${PV} ~dev-qt/qtgui-${PV} ~dev-qt/qtnetwork-${PV} ~dev-qt/qtprintsupport-${PV} ~dev-qt/qtweb

Re: [gentoo-user] slot conflict for media-libs/x264-0.0

dia-sound/sound-juicer-3.24.0 [nomerge ] app-cdr/brasero-3.12.2-r1 [ebuild U ]gnome-base/gvfs-1.32.2 [1.32.1-r1] [ebuild U ] sys-process/procps-3.3.15-r1 [3.3.12-r1] [nomerge ] net-print/hplip-3.17.10 [ebuild U ] dev-python/PyQt5-5.9.2 [5.7.1] [ebuild U ]

Re: [gentoo-user] New xorg-proto package blocks everything else.

-ipv6 -libressl -sqlite {-test} -tk -wininst" > [ebuild U ] sys-libs/slang-2.3.2 [2.3.0] > [blocks b ] (" [ebuild U ] dev-libs/double-conversion-3.0.0 [2.0.1] USE="{-test%}" > [ebuild N ] sys-libs/libomp-5.0.1 USE="-hwloc -ompt {-test}"

Re: [gentoo-user] problem updating KDE breeze

\ > en/include > -I/var/tmp/portage/portage/kde-plasma/breeze-5.13.5/work/breeze-5.13.5/kstyle > -I/var/tmp/portage/portage/kde-plasma/breeze-5.13.5/work/breeze-5.13.5/kstyle/animations > -I/var/tmp/portage/portag\ > e/kde-plasma/breeze-5.13.5/work/breeze-5.13.5/kstyle/debug -I/usr/in

Re: [gentoo-user] problem updating KDE breeze

5/QtGui -I/usr/include/qt5/QtWidgets -I/usr/inc\ lude/qt5/QtDBus -I/usr/include/qt5/QtQuick -I/usr/include/qt5/QtQml -I/usr/include/qt5/QtNetwork -I/usr/include/KF5/KConfigCore -I/usr/include/KF5 -I/usr/include/KF5/KConfigWidgets -I/usr/include/KF5/KCo\ decs -I/usr/include/KF5/KWidgetsAddons -I/usr

[gentoo-user] Total recall

bs/openssl:0[bindist]) required by (dev-qt/qtnetwork-5.7.1:5/5.7::gentoo, installed) >=dev-libs/openssl-1.0.1:0/0= required by (app-crypt/qca-2.1.3:2/2::gentoo, installed) dev-libs/openssl:0= required by (app-emulation/virtualbox-5.1.14:0/0::gentoo, installed) dev-libs/openssl:0= r

Re: [gentoo-user] Total recall

.0:0/0::gentoo, ebuild scheduled for merge) > > dev-libs/openssl:0/0= required by > > (dev-python/cryptography-1.7.2:0/0::gentoo, installed) > > dev-libs/openssl:0[bindist=] (dev-libs/openssl:0[bindist]) required by > > (dev-qt/qtnetwork-5.7.1:5/5.7::gentoo, installed) &g

Re: [gentoo-user] Total recall

equired by > (dev-perl/Crypt-OpenSSL-DSA-0.190.0:0/0::gentoo, ebuild scheduled for merge) > dev-libs/openssl:0/0= required by > (dev-python/cryptography-1.7.2:0/0::gentoo, installed) > dev-libs/openssl:0[bindist=] (dev-libs/openssl:0[bindist]) required by > (dev-qt/qtne

[gentoo-user] lots of problems in world update including new perl -- need some help

libs/openssl:0/0= required by (sys-block/mbuffer-20181119:0/0::gentoo, installed) dev-libs/openssl:0=[bindist=] (dev-libs/openssl:0=[-bindist]) required by (dev-qt/qtnetwork-5.11.3:5/5.11::gentoo, installed) dev-libs/openssl:0= required by (net-ftp/proftpd-1.3.6-r2:0/0::gentoo, installed)

Re: [gentoo-user] Re: KDE 5: Broken file protocol for KDE 4 apps

gnome-extra/polkit-gnome-0.105-r1 [ebuild R ~]kde-plasma/polkit-kde-agent-5.8.1 [ebuild R ~] kde-frameworks/kcrash-5.27.0 [ebuild R ~] kde- frameworks/kcoreaddons-5.27.0 [ebuild R]

Re: [gentoo-user] update fails, but I don't see why

too] USE="jpeg nls ocr png tiff -gimp -lcms" 0 KiB [ebuild U  ] net-analyzer/iftop-1.0_pre4-r4::gentoo [1.0_pre4-r2::gentoo] 0 KiB [ebuild   R    ] net-analyzer/net-snmp-5.9-r2:0/40::gentoo USE="bzip2 ipv6 ssl tcpd zlib -X -doc -elf -kmem -libressl -lm-sensors -mfd-rewrites -mi

Re: [gentoo-user] Re: Konsole

-libusb -python% (-selinux)" ABI_X86="(64%*) -32% (-x32)" PYTHON_TARGETS="python2_7" 694 KiB [ebuild U ] app-text/iso-codes-3.68::gentoo [3.65::gentoo] LINGUAS="en -af -am -ar -as -ast -az -be -bg -bn -bn_IN -br -bs -byn -ca -crh -cs -cy -da -de -dz -el -eo -es -et

[gentoo-user] KDE update revdep-rebuild.sh fail

dev-qt/qtnetwork:5/5.9 dev-qt/qtopengl:4 dev-qt/qtopengl:5/5.9 dev-qt/qtpaths:5/5.9 dev-qt/qtprintsupport:5/5.9 dev-qt/qtquickcontrols:5/5.9 dev-qt/qtquickcontrols2:5/5.9 dev-qt/qtscript:4 dev-qt/qtscript:5/5.9 dev-qt/qtsql:4 dev-qt/qtsql:5/5.9 dev-qt/qtsvg:4 dev-qt/qtsvg:5/5.9 dev-qt/qttest:4

[gentoo-user] update fails, but I don't see why

minimal -sqlite -static-libs -test" ABI_X86="(64) -32 (-x32)" 833 KiB [ebuild U  ] app-text/qpdf-10.0.4:0/28::gentoo [9.0.2:0/26::gentoo] USE="ssl%* -doc -examples -libressl% -test (-perl%) (-static-libs%)" 18033 KiB [ebuild U  ] sys-devel/clang-common-11.0.0::gentoo [10.

Re: [gentoo-user] update fails, but I don't see why

nel/gentoo-sources-5.4.80-r1:5.4.80-r1::gentoo [4.19.72:4.19.72::gentoo, 5.4.38:5.4.38::gentoo, 5.4.60:5.4.60::gentoo, 5.4.66:5.4.66::gentoo, 5.4.72:5.4.72::gentoo] USE="-build -experimental -symlink" 2729 KiB [ebuild   R    ] dev-lang/python-3.6.12:3.6/3.6m::gentoo USE="gdbm ipv6 ncurse