Re: [gentoo-user] driver for 3Com 3c905 100BaseTX [Boomerang]????

2005-06-27 Thread askar ...
/100mbps EISA, PCI and PCMCIA 3Com network cards: Vortex(Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI Boomerang (EtherLink XL 3c900 or 3c905)PCI Cyclone (3c540/3c900/3c905/3c980/3c575/3c656)PCI and Cardbus Tornado (3c905

[gentoo-user] Ethernet card not working, tried tulip drivers...

2009-10-27 Thread Marcus Wanner
, but it still doesn't work. Note that I do not have the same ethernet card as is mentioned in the link above, and have not been able to find out exactly what it's name is, besides the fact that the name includes Tornado. Also note that it worked fine in the Gentoo minimal installation cd. To sum it up

Re: [gentoo-user] Ethernet card not working, tried tulip drivers...

2009-10-27 Thread Alan McKinnon
booting the newly compiled kernel with the tulip drivers, but it still doesn't work. Note that I do not have the same ethernet card as is mentioned in the link above, and have not been able to find out exactly what it's name is, besides the fact that the name includes Tornado. Also note

Re: [gentoo-user] eth0 does not exist - followup

2006-05-28 Thread Richard Fish
On 5/28/06, Kenneth Hopping [EMAIL PROTECTED] wrote: Richard Fish wrote: What do lspci and lsmod report? 01:08.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74) Ok, when you go to configure your kernel, go under Device Drivers-Network device support-Ethernet (10

[gentoo-user] wake-on-lan, 3c59x

2006-11-30 Thread David Talkington
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Salutations -- I'm puzzled. I know that this card supports WOL, because I've done it: # uname -r 2.6.18-gentoo-r3 # lspci |grep 3c 01:0c.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78) However: # ethtool -s eth0 wol

Re: [gentoo-user] driver for 3Com 3c905 100BaseTX [Boomerang]????

2005-06-27 Thread Zac Medico
and Cardbus Tornado (3c905) PCI Hurricane (3c555/3cSOHO) PCI If you have such a card, say Y and read the Ethernet-HOWTO, available from http://www.tldp.org/docs.html#howto. More specific

Re: [gentoo-user] hdparm error

2006-09-07 Thread Grant
802.11abg NIC (rev 01) 01:0a.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78) 01:0b.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07) 01:0b.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 07) - Grant -- gentoo-user@gentoo.org mailing list

Re: [gentoo-user] Ethernet card not working, tried tulip drivers...

2009-10-27 Thread Marcus Wanner
includes Tornado. Also note that it worked fine in the Gentoo minimal installation cd. To sum it up: How do I figure out what the name of my card is, and after that, what driver do I need? Post this output: lspci dmesg | grep something_relevant lscpi returns command not found, don't know

Re: [gentoo-user] Ethernet card not working, tried tulip drivers...

2009-10-28 Thread Mick
On Tuesday 27 October 2009 23:32:07 Marcus Wanner wrote: Note that I do not have the same ethernet card as is mentioned in the link above, and have not been able to find out exactly what it's name is, besides the fact that the name includes Tornado. Also note that it worked fine in the Gentoo

Re: [gentoo-user] Ethernet card not working, tried tulip drivers...

2009-10-28 Thread Damien Sticklen
is, besides the fact that the name includes Tornado. Also note that it worked fine in the Gentoo minimal installation cd. To sum it up: How do I figure out what the name of my card is, and after that, what driver do I need? Post this output: lspci dmesg | grep something_relevant

Re: [gentoo-user] Ethernet card not working, tried tulip drivers... [resolved]

2009-10-29 Thread Marcus Wanner
[Tornado] (rev 78) and that Kernel driver in use: 3c59x. Great! Only problem was that when I went to look for that driver in menuconfig, all I found were two other drivers for similar cards (one of which had [Typhoon] in the name). However, I enabled those drivers, recompiled, rebooted, and everything

RE: [gentoo-user] Admin system documentation

2005-04-18 Thread Dave Nebinger
I just can't get my head around why you would want or need to do a total rebuild. I myself can't imagine _wanting_ to do a rebuild, but needing to, yes. Flood, tornado, theft, etc . Users have work to do. Let's see, what's my SAMBA configuration? And those SQL databases looked

Re: [gentoo-user] eth0 does not exist - followup

2006-05-28 Thread Daniel da Veiga
On 5/28/06, Richard Fish [EMAIL PROTECTED] wrote: On 5/28/06, Kenneth Hopping [EMAIL PROTECTED] wrote: Richard Fish wrote: What do lspci and lsmod report? 01:08.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74) Ok, when you go to configure your kernel, go under

[gentoo-user] port bandwidth discovery

2009-09-11 Thread James
description: Ethernet interface product: 3c450 HomePNA [Tornado] vendor: 3Com Corporation

Re: [gentoo-user] port bandwidth discovery

2009-09-12 Thread Daniel Troeder
: latency=32 *-network:1 description: Ethernet interface product: 3c450 HomePNA [Tornado

Re: [gentoo-user] Ethernet card not working, tried tulip drivers... [resolved]

2009-10-28 Thread Marcus Wanner
that I am using a 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78) and that Kernel driver in use: 3c59x. Great! Only problem was that when I went to look for that driver in menuconfig, all I found were two other drivers for similar cards (one of which had [Typhoon] in the name). However, I

Re: [gentoo-user] next step X

2005-05-12 Thread cfk
the next step. Good luck, Mark Under the liveCD, the network interface is working fine and I was able to emerge kde, albeit with an error at the end with a version mismatch between libtool.m4 (1.5.10) and litmain (1.5), but thats the story after this one. lspci shows the 3com 3c905C Tornado card

[gentoo-user] eth0 does not exist - followup

2006-05-28 Thread Kenneth Hopping
: Intel Corporation 82801AA SMBus (rev 02) 01:05.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24 [CrystalClear SoundFusion Audio Accelerator] (rev 01) 01:08.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74) # lsmod Module Size Used by /proc/modules

Re: [gentoo-user] Ethernet card not working, tried tulip drivers... [resolved]

2009-10-28 Thread Dale
similar output to that above, and found out that I am using a 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78) and that Kernel driver in use: 3c59x. Great! Only problem was that when I went to look for that driver in menuconfig, all I found were two other drivers for similar cards (one of which

Re: [gentoo-user] Ethernet card not working, tried tulip drivers... [resolved]

2009-10-28 Thread Marcus Wanner
and ran lspci -v, it worked great. I got similar output to that above, and found out that I am using a 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78) and that Kernel driver in use: 3c59x. Great! Only problem was that when I went to look for that driver in menuconfig, all I found were two other

Re: [gentoo-user] Ethernet card not working, tried tulip drivers... [resolved]

2009-10-28 Thread Dale
:-) :-) I booted up the livecd and ran lspci -v, it worked great. I got similar output to that above, and found out that I am using a 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78) and that Kernel driver in use: 3c59x. Great! Only problem was that when I went to look

Re: [gentoo-user] Re: Upgrading from FX-5200 to a GeForce 6200 512MB

2010-10-25 Thread Dale
the fan was turning on the video card chip. It was spinning fine and I could feel a little bit of air. It's a small fan so I wasn't expecting a tornado or anything. Anyway, after blowing it out AND generating a xorg-conf with nvidia's program, I get this: r...@smoker / # glxgears Running

[gentoo-user] Re: [gentoo-security] AMD64 + Hard Drive weirdness...

2006-02-16 Thread Jeff
) 02:05.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) 02:09.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78) 02:0a.0 Multimedia audio controller: Creative Labs SB0400 Audigy2 Value And modules: Module Size Used

Re: [gentoo-user] bad jack(?) performance

2005-10-14 Thread Matt Garman
) :02:01.0 Ethernet controller: 3Com Corporation 3C920B-EMB Integrated Fast Ethernet Controller [Tornado] (rev 40) :03:00.0 VGA compatible controller: nVidia Corporation NV28 [GeForce4 Ti 4200 AGP 8x] (rev a1) lsmod Module Size Used by realtime7752 0

Re: [gentoo-user] Slow PCMCIA-USB

2006-06-24 Thread Christoph Eckert
] (rev b2) 02:00.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78) 02:01.0 CardBus bridge: Texas Instruments PCI4451 PC card Cardbus Controller 02:01.1 CardBus bridge: Texas Instruments PCI4451 PC card Cardbus Controller 02:01.2 FireWire (IEEE 1394): Texas Instruments

[gentoo-user] Dumb `lspci -F` question...

2005-10-27 Thread Stroller
00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 :00:03.0 Ethernet controller: 3Com Corporation 3c556B CardBus [Tornado] (rev 20) 00: b7 10 56 60 17 00 10 02 20 00 00 02 08 50 80 00 10: 01 18 00 00 00 14 10 e8 00 10 10

Re: [gentoo-user] 3Com PCMCIA network card not recognised

2010-12-13 Thread Mick
Texas Instruments PCI1450 +-02.1 Texas Instruments PCI1450 +-03.0 3Com Corporation 3c556B CardBus [Tornado] # --- onboard card +-03.1 3Com Corporation Mini PCI 56k Winmodem +-05.0 Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio Accelerator] +-07.0