TwoShelbys4Me
Thu, 17 May 2007 07:39:28 -0700
All, I have a wide open throttle stall in 2nd or 3rd gear. It will recover if I let off the gas slightly. It also did it with a MP Stage 2 computer. It just does not feel as strong as my stock CSX-T. I've pieced this together from parts in boxes that came in the car. 87 CSX, stock block and computer with MP head, slider cam. Not sure about lift. 3 inch, no cat. A.F.P. set at 50psi and I think it's got 20% injectors. 12-14 vacuum, boosts to 10 just fine. I've checked and double checked vacuum lines. My guess is I have to drop the fuel pressure somewhat. The OTC diag/code box I have will not read the O2 sensor with it's current software. I'm connection to the cable on the right front by the MAP. I have not connected a volt meter or gauge to the O2 wire yet. Q#1 Any Ideas or suggestions, things to look at before I dig into it again? Q#2 What type of diag/code box will read 87 electronics? Thanks in advance. Steve Kalmes ************************************** See what's free at http://www.aol.com. -----------------------REMOVE-FOOTER-WHEN-REPLYING---------------------------- Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html