Hi Mike,
I was aware of your method, but have no need for a proportional throttle. At
14 cells and 120Amps, the plane is either climbing like heck or gliding, and
I only get a few seconds of run time per climb or the batteries and ESC are
gonna give me a bad day. As a result I'd prefer the throttle to be switched
for simplicity's sake.
I did just get a novel idea, however. I'm going to go back to my manual and
actually look at if for a few minutes. Heck I'm not a dumb guy (keep it down
Sheldon), I'll just have to work it out.
Thanks
Dan
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: <soaring@airage.com>
Sent: Saturday, March 12, 2005 8:18 PM
Subject: Re: [RCSE] 8103 programming for spoileron. HELP PLEASE !!!!
Hi all,
Now that I have a power system in hand, I'm finally doing the setup on my
Ariane V6 F5B ship.
Does anyone have a guide handy for setting up the throttle on a switch
("gear" would be best I suppose) and spoilers up as I drop the throttle
stick?
Thanks
Dan
Why not have both on your throttle stick? Here's the way I've been doing it
for years:
http://www.vvsss.com/xp8103/
--
Winch Solenoid Safety Buzzer - http://www.vvsss.com/buzzer/
_____
\__________________|__________________/
(O)
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED] Please note that
subscribe and unsubscribe messages must be sent in text only format with
MIME turned off. Email sent from web based email such as Hotmail and AOL
are generally NOT in text format
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format