[speedtouch] Re: Patch for pppoa3 to support PPPoE bridge under FreeBSD

[Nuno Ricardo Gomes Antunes]

Hi,

I'm experiencing the same dificulties as Nuno Teixeira. I believe we use the 
same internet provider: sapo. Internet access is still no go :(

Anyway, this is what I've done so far:

1 - Added the following to /etc/usbd.conf so that the firmware gets uploaded 
to the modem as soon as the modem is hotplugged:

# Alcatel Speedtouch USB
device "Alcatel SpeedTouch USB"
    devname "ugen[0-9]+"
    vendor 0x06b9
    product 0x4061
    attach "/usr/local/sbin/modem_run -f /usr/local/libdata/mgmt.o"

2 - Added if_tap_load="yes" to /boot/loader.conf so that the module gets 
loaded at startup

3 - Pulled the latest sources from cvs, applied Francois Rogler's 2nd patch 
for pppoa3, compiled and installed it

4 - Configured /etc/ppp/ppp.conf to include the following:

default:
 set log phase chat ipcp ccp tun command

sapo_adsl:
 set authname *********
 set authkey *********
 set device PPPoE:tap0
 set mru 1492
 set mtu 1492
 set speed sync
# accept chap
# accept pap
 set timeout 0
 enable lqr
 set lqrperiod 5
 set cd 5
 set redial 15 10000
 set dial
 set login
 set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
 add default HISADDR
 enable dns

5 - start pppoa3:

pppoa3 -b -vpi 0 -vci 35 -v 1 -c

6 - check pppoa3 log file:

tail -f /var/log/pppoa3.log

Jul 13 19:31:57 furaossos pppoa3[520]: pppoa3 version 1.2-beta2 started by 
root (uid 0)
Jul 13 19:31:57 furaossos pppoa3[520]: Control thread ready
Jul 13 19:31:57 furaossos pppoa3[520]: Modem found!
Jul 13 19:31:57 furaossos pppoa3[520]: host  --> pppoa3 --> modem stream 
ready

7 - at this time tap0 shows up in ifconfig:

tap0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        ether 00:bd:10:3d:01:00
        Opened by PID 519

8 - start ppp:

ppp -ddial sapo_adsl

9 - check ppp log:

Jul 13 19:33:04 furaossos ppp[535]: Phase: Using interface: tun0 
Jul 13 19:33:04 furaossos ppp[535]: Phase: deflink: Created in closed state 
Jul 13 19:33:04 furaossos ppp[535]: tun0: Command: sapo_adsl: set authname 
******** 
Jul 13 19:33:04 furaossos ppp[535]: tun0: Command: sapo_adsl: set authkey 
******** 
Jul 13 19:33:04 furaossos ppp[535]: tun0: Command: sapo_adsl: set device 
PPPoE:tap0 
Jul 13 19:33:04 furaossos ppp[535]: tun0: Command: sapo_adsl: set mru 1492 
Jul 13 19:33:04 furaossos ppp[535]: tun0: Command: sapo_adsl: set mtu 1492 
Jul 13 19:33:04 furaossos ppp[535]: tun0: Command: sapo_adsl: set speed sync 
Jul 13 19:33:04 furaossos ppp[535]: tun0: Command: sapo_adsl: set timeout 0 
Jul 13 19:33:04 furaossos ppp[535]: tun0: Command: sapo_adsl: enable lqr 
Jul 13 19:33:04 furaossos ppp[535]: tun0: Command: sapo_adsl: set lqrperiod 
5 
Jul 13 19:33:04 furaossos ppp[535]: tun0: Command: sapo_adsl: set cd 5 
Jul 13 19:33:04 furaossos ppp[535]: tun0: Command: sapo_adsl: set redial 15 
10000 
Jul 13 19:33:04 furaossos ppp[535]: tun0: Command: sapo_adsl: set dial 
Jul 13 19:33:04 furaossos ppp[535]: tun0: Command: sapo_adsl: set login 
Jul 13 19:33:04 furaossos ppp[535]: tun0: Command: sapo_adsl: set ifaddr 
10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 
Jul 13 19:33:04 furaossos ppp[535]: tun0: Command: sapo_adsl: add default 
HISADDR 
Jul 13 19:33:04 furaossos ppp[535]: tun0: Command: sapo_adsl: enable dns 
Jul 13 19:33:04 furaossos ppp[536]: tun0: Phase: PPP Started (ddial mode). 
Jul 13 19:33:04 furaossos ppp[536]: tun0: Phase: bundle: Establish 
Jul 13 19:33:04 furaossos ppp[536]: tun0: Phase: deflink: closed -> opening 
Jul 13 19:33:05 furaossos ppp[536]: tun0: Phase: deflink: Connected! 
Jul 13 19:33:05 furaossos ppp[536]: tun0: Phase: deflink: opening -> dial 
Jul 13 19:33:05 furaossos ppp[536]: tun0: Phase: deflink: dial -> carrier 
Jul 13 19:33:10 furaossos ppp[536]: tun0: Phase: deflink: Disconnected! 
Jul 13 19:33:10 furaossos ppp[536]: tun0: Phase: deflink: carrier -> hangup 
Jul 13 19:33:10 furaossos ppp[536]: tun0: Phase: deflink: Connect time: 5 
secs: 0 octets in, 0 octets out 
Jul 13 19:33:10 furaossos ppp[536]: tun0: Phase: deflink: 0 packets in, 0 
packets out 
Jul 13 19:33:10 furaossos ppp[536]: tun0: Phase:  total 0 bytes/sec, peak 0 
bytes/sec on Sun Jul 13 19:33:05 2003 
Jul 13 19:33:10 furaossos ppp[536]: tun0: Phase: deflink: hangup -> opening 
Jul 13 19:33:10 furaossos ppp[536]: tun0: Phase: deflink: Enter pause (15) 
for redialing. 
Jul 13 19:33:25 furaossos ppp[536]: tun0: Chat: deflink: Redial timer 
expired. 
Jul 13 19:33:25 furaossos ppp[536]: tun0: Phase: deflink: Connected! 
Jul 13 19:33:25 furaossos ppp[536]: tun0: Phase: deflink: opening -> dial 
Jul 13 19:33:25 furaossos ppp[536]: tun0: Phase: deflink: dial -> carrier 
Jul 13 19:33:30 furaossos ppp[536]: tun0: Phase: deflink: Disconnected! 
Jul 13 19:33:30 furaossos ppp[536]: tun0: Phase: deflink: carrier -> hangup 
Jul 13 19:33:30 furaossos ppp[536]: tun0: Phase: deflink: Connect time: 5 
secs: 0 octets in, 0 octets out 
Jul 13 19:33:30 furaossos ppp[536]: tun0: Phase: deflink: 0 packets in, 0 
packets out 
Jul 13 19:33:30 furaossos ppp[536]: tun0: Phase:  total 0 bytes/sec, peak 0 
bytes/sec on Sun Jul 13 19:33:25 2003 
Jul 13 19:33:30 furaossos ppp[536]: tun0: Phase: deflink: hangup -> opening 
Jul 13 19:33:30 furaossos ppp[536]: tun0: Phase: deflink: Enter pause (15) 
for redialing.


And keeps hanguping and redialing for ever...

What may be causing this? Any help would be much welcome.

I'm running FreeBSD 5.1-CURRENT as from last weekend
The firmware I'm using is the one from windows (alcaudsl.sys)

Nuno Teixeira, please keep me posted if you get lucky! Obrigado! =)

Anyway keep up the good work! 

Thanks
Nuno Antunes


Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]