----- Original Message ----- From: "Gabor Laszlo Zsolt" <[EMAIL PROTECTED]> To: <speedtouch@ml.free.fr> Sent: Saturday, August 11, 2007 3:20 PM Subject: [speedtouch] Re: ZTE ZXDSL 852 and Fedora Core 7
> > I found this firmware, file called "cxacru-fw.bin.gz" > http://ftp.linux.it/pub/People/md/warez/ > > and repleced it in /lib/firmare and now it gets loaded, the link led goes up just like under windows > I even found these messages in /var/log/messages > > Aug 11 18:45:28 localhost kernel: cxacru 1-1:1.0: found firmware cxacru-fw.bin You may have more answer from cxacru mailing list (I am unsure) http://sourceforge.net/projects/accessrunner/ > Aug 11 18:45:28 localhost firmware_helper[3014]: Loading of /lib/firmware/cxacru-cf.bin for (unknown) driver failed: No such file or directory You may need to extract firmware from cxacru-fw.bin.gz cd /lib/firmware && gzip -d cxacru-fw.bin.gz That could solve 'No such file'. Probably firmware loader attempt to load file.gz if file is not found. > Aug 11 18:45:44 localhost kernel: ATM dev 0: ADSL line: attempting to activate > Aug 11 18:45:49 localhost kernel: ATM dev 0: ADSL line: channel analysis > Aug 11 18:45:54 localhost kernel: ATM dev 0: ADSL line: up (2048 kb/s down | 384 kb/s up) > > witch si strange, can;t find the file but the adsl line is detected ok, I have these up and down bandwiths > > but when I enter ifup ppp0 the same thing happens > > Aug 11 18:49:40 localhost kernel: PPP generic driver version 2.4.2 > Aug 11 18:49:40 localhost kernel: NET: Registered protocol family 24 > Aug 11 18:49:40 localhost RFC1483/2684 bridge: Interface "nas0" created successfully > Aug 11 18:49:40 localhost RFC1483/2684 bridge: Communicating over ATM 0.0.35, encapsulation: LLC Did your ISP require PPPoE? PPPoA may too work, there is less configuration, usually both work. If VPI VCI values are not exact (you look to have set VPI=0 VCI=35), your connection will fail Have you check the values used on windows? Gilles Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
