I rebuilt the driver and had everything working yesterday on a Brocade 3900.
Today I'm getting the following error on the clients when running fcinfo
remote-port:
bash-3.00# fcinfo remote-port -slp 10000000c969dd78
Remote Port WWN: 10000000c94222ec
Active FC4 Types: SCSI
SCSI Target: unknown
Node WWN: 20000000c94222ec
Link Error Statistics:
Link Failure Count: 3
Loss of Sync Count: 46
Loss of Signal Count: 3
Primitive Seq Protocol Error Count: 0
Invalid Tx Word Count: 180
Invalid CRC Count: 0
Error has occured. HBA_ScsiReportLUNsV2 failed. reason ERROR
Unfortunately that's not a whole lot of information to go on. I've rebooted the
client systems and the switch. I can't reboot the head right now but I'll try
that later. I see nothing terribly odd in the output of 'echo
"*stmf_trace_buf/s"| mdb -k'
Even if rebooting my storage head fixes the problem that isn't a practical
solution.
Any good way of reloading the driver or otherwise forcing the head to
reinitialize the cards?
Thanks-
--
This message posted from opensolaris.org
_______________________________________________
storage-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/storage-discuss
