Farcy Jacques-Olivier
Tue, 09 Feb 2010 06:38:14 -0800
Hana Skoumalova a écrit :
Hello,I am trying to run SRSS 4.2 on Fedora 12. I installed and configured the software, but DTU doesn't boot. It hangs with 22D error and a message "No DNS servers". My server uses DN servers listed in /etc/resolv.conf. Output of utquery is as follows:terminalID=080020f27203 terminalIPA=192.168.128.16 model=CoronaP1 currentAuth=192.168.128.3 currentFW=4.2_77_2009.10.19.17.01 currentBarrier=420 currentBarrierLevel=420 currentMTU=1500 Subnet=255.255.255.0 Router=192.168.128.3 MTU=1500 Broadcst=192.168.128.255 LeaseTim=86400 DHCPServer=192.168.128.3 AuthSrvr=192.168.128.3 AuthPort=7009 LogHost=195.113.2.20 FwSrvr=192.168.128.3 NewTVer=4.2_77_2009.10.19.17.01 FWservType=none speed=100F configMTU=1500 AltAuth=192.168.128.3 stopqon=0 bandwidth=100000000 How can I pass the addresses of DN servers to DTU? Best regards, Hana _______________________________________________ SunRay-Users mailing list SunRay-Users@filibeto.org http://www.filibeto.org/mailman/listinfo/sunray-users
Hi, I had the same problem, my SRSS server has two ethernet cards : eth0 : Subnetwork with lan and wan access (internet ...) with DNS configuredeth1 : Sun Ray interconnection (with DHCP server) with IP address 192.168.0.1
I add to tell to the DHCP option that my gateway is 192.168.0.1, so DTUs uses the server as DNS server.
You can also use utquery -d subnet_IP_address to see what is configured ... Good luck ! Jacques-Olivier _______________________________________________ SunRay-Users mailing list SunRay-Users@filibeto.org http://www.filibeto.org/mailman/listinfo/sunray-users