[Syslog] Discuss - Source Address

[Chris Lonvick]

Discuss - Source Address

Lars:
draft-ietf-syslog-protocol-21, Section 5., paragraph 2:
   If a syslog application is running on a machine
   that has both statically and dynamically assigned addresses, then
   that value SHOULD be from the statically assigned addresses.  As an
   alternative, the syslog application MAY use the IP address of the
   interface that is used to send the message.

  DISCUSS: So if a machine has only a dynamic address, it should instead
  use 127.0.0.1 in syslog messages, because that's statically assigned?
  That doesn't seem to make sense. Also, in practice, it will be
  difficult for the syslog sender to determine which addresses are
  statically or dynamically assigned (think MobileIP or even HIP).


Proposed Resolution:

The author and the chairs recommend removing this paragraph.  Any 
objection this this?

_______________________________________________
Syslog mailing list
Syslog@lists.ietf.org
https://www1.ietf.org/mailman/listinfo/syslog