Messages by Thread
-
[uClinux-dev] iptables not working in 2.6.37?
nunya si
-
[uClinux-dev] smc91x
Ingrid GUE
-
[uClinux-dev] Re: [HELP] coldfire, bss.variable offset greater than __bss_end
Angelo Dureghello
-
[uClinux-dev] Kyocera 7135 and 100% libre software
Quiliro Ordóñez
-
[uClinux-dev] telnetd: All network ports in use
dhlm83
-
[uClinux-dev] Coldfire GPIO question
Angelo Dureghello
-
[uClinux-dev] At91 and skyeye config files
Brent Weatherall
-
[uClinux-dev] [PATCH] m68k: remove dead definition from thread-info.h
gerg
-
[uClinux-dev] [PATCH] m68k: remove duplicate asm offset for task thread.info
gerg
-
[uClinux-dev] [PATCH] m68knommu: remove unused fasthandler declaration
gerg
-
[uClinux-dev] [PATCH] m68k: merge the init_task code for mmu and non-mmu targets
gerg
-
[uClinux-dev] Cross compiling uClinux 2.4.x for arm-nommu arch
Brent Weatherall
-
[uClinux-dev] Re: [PATCH 2/4] TTY: serial, remove dead code from 68328
Geert Uytterhoeven
-
[uClinux-dev] samsung lcd support
Angelo Dureghello
-
[uClinux-dev] Re: uClinux-dev Digest, Vol 100, Issue 14
kylix liu
-
[uClinux-dev] [PATCH] m68knommu: create common externs for _ram* vars
gerg
-
[uClinux-dev] [PATCH] m68knommu: use generic section names in mm/init code
gerg
-
[uClinux-dev] [PATCH] m68knommu: remove extern definitions of memory_start/memory_end from mm/init
gerg
-
[uClinux-dev] [PATCH] m68knommu: use generic section names in setup code
gerg
-
[uClinux-dev] mcf5307, i2c rtc
Angelo Dureghello
-
Re: [uClinux-dev] mcf5307, i2c rtc
Lennart Sorensen
-
Re: [uClinux-dev] mcf5307, i2c rtc
Steven King
-
Re: [uClinux-dev] mcf5307, i2c rtc
Angelo Dureghello
-
Re: [uClinux-dev] mcf5307, i2c rtc
Steven King
-
Re: [uClinux-dev] mcf5307, i2c rtc
Angelo Dureghello
-
Re: [uClinux-dev] mcf5307, i2c rtc
Viet Nguyen
-
Re: [uClinux-dev] mcf5307, i2c rtc
Angelo Dureghello
-
Re: [uClinux-dev] mcf5307, i2c rtc
Angelo Dureghello
-
Re: [uClinux-dev] mcf5307, i2c rtc
Steven King
-
Re: [uClinux-dev] mcf5307, i2c rtc
Angelo Dureghello
-
Re: [uClinux-dev] mcf5307, i2c rtc
Steven King
-
Re: [uClinux-dev] mcf5307, i2c rtc
angelo
-
Re: [uClinux-dev] mcf5307, i2c rtc
Viet Nguyen
-
Re: [uClinux-dev] mcf5307, i2c rtc
Angelo Dureghello
-
Re: [uClinux-dev] mcf5307, i2c rtc
Angelo Dureghello
-
Re: [uClinux-dev] mcf5307, i2c rtc
Greg Ungerer
-
[uClinux-dev] Invitation to connect on LinkedIn
Renjith K S
-
[uClinux-dev] boot uClinux via SLIP
Philipp Brejcha
-
[uClinux-dev] FEC and brctl after unplug in/out Ethernet cable
nunya si
-
[uClinux-dev] New uClinux Port to AT91CAP7 (ARM7TDMI)
Bob Wirka
-
[uClinux-dev] possible mcf5307 port issue
angelo
-
Re: [uClinux-dev] [PATCH] m68k: reorganize Kconfig options to improve mmu/non-mmu selections
Sam Ravnborg
-
[uClinux-dev] [PATCH 0/2] m68k: merge mmu and non-mmu traps.c files
gerg
-
[uClinux-dev] latest uClinux porting problems
larry
-
[uClinux-dev] get Ctrl-C working in uClinux (msh)
Philipp Brejcha
-
[uClinux-dev] watchdog m5272, make ERROR !
dhlm83
-
[uClinux-dev] PATCH: i2c on mcf5208
Peter Turczak
-
[uClinux-dev] fec driver in 2.4.x kernel
dhlm83
-
[uClinux-dev] NetBurner MOD5272 reboot solved
dhlm83
-
[uClinux-dev] micrel PHY change between kernels on freescale 5275
Jordan Fuerst
-
[uClinux-dev] Problems with SPI/GPIO on 520x
Peter Turczak
-
[uClinux-dev] [m68k] Get boot parameters
Viet Nguyen
-
[uClinux-dev] uClinux not running anymore at 0x20000
angelo
-
[uClinux-dev] net-snmp crashing on new kernel?
nunya si
-
[uClinux-dev] m68k: uClibc pthread
Viet Nguyen
-
[uClinux-dev] uClinux page cache, pdflush and memory reclamation
Erjiang Li
-
[uClinux-dev] [PATCH] fix sundry typos in arch/arm/mm/proc
Brian S. Julin
-
[uClinux-dev] [PATCH] m68k: Revive reporting of spurious interrupts
Geert Uytterhoeven
-
[uClinux-dev] Planning to update kernel and userland, but to which revision?
Peter Turczak
-
[uClinux-dev] [PATCH] FDPIC: Fix memory leak
David Howells
-
[uClinux-dev] Can we decrease the uclinux kernel stack size to 4KB on ARM paltform
Erjiang Li
-
[uClinux-dev] [PATCH] m68k: fix some atomic operation asm address modes for ColdFire
gerg
-
[uClinux-dev] [PATCH] m68k: use CPU_HAS_NO_BITFIELDS for signal functions
gerg
-
[uClinux-dev] [PATCH] m68k: merge and clean up delay.h files
gerg
-
[uClinux-dev] [PATCH] m68knommu: Move forward declaration of do_IRQ() from machdep.h to irq.h
Geert Uytterhoeven
-
[uClinux-dev] [PATCH] m68knommu: correctly use trap_init
gerg
-
[uClinux-dev] [PATCH] m68knommu: merge ColdFire 5206 and 5206e platform code
gerg
-
[uClinux-dev] dont get jffs2 formated on snapgear4.0.7
Siegfried Müller - MB Connect Line GmbH
-
[uClinux-dev] [PATCH] m68k: merge mmu and non-mmu include/asm/entry.h files
gerg
-
[uClinux-dev] [PATCH] m68k: merge the mmu and non-mmu kernel/Makefiles
gerg
-
[uClinux-dev] [PATCH] m68k: merge mmu and non-mmu arch Makefiles
gerg
-
[uClinux-dev] troubles with compiling kernel
Hasan abbadi
-
[uClinux-dev] Re: uClinux-dev Digest, Vol 98, Issue 10
藏洪蛟
-
[uClinux-dev] [PATCH] binfmt_flat: missing argv table
Yoshinori Sato
-
[uClinux-dev] [git pull] m68knommu bug fixes
Greg Ungerer
-
Re: [uClinux-dev] Porting uClinux to ARM922T
Lennart Sorensen
-
[uClinux-dev] [PATCH] m68knommu: fix linker script exported name sections
gerg
-
[uClinux-dev] [PATCH 0/2] m68knommu: fix cpu optimization conditionals
gerg
-
[uClinux-dev] Missed interrupts
Wooff, David
-
[uClinux-dev] serial port (RS-232) baudrate issue
Salvatore Frizzoli - IMS Italy
-
[uClinux-dev] [PATCH 3/4] m68knommu: Make empty_zero_page "void *", like on m68k
Geert Uytterhoeven
-
[uClinux-dev] [git pull] m68knommu arch updates
Greg Ungerer
-
[uClinux-dev] [PATCH] m68k: merge mmu and non-mmu bitops.h
gerg