... maybe i should just try increasing the job threads with --job-threads shame on me
On Fri, 2017-03-17 at 21:30 +0000, Roland Otta wrote: forgot to mention the version we are using: we are using 3.0.7 - so i guess we should have incremental repairs by default. it also prints out incremental:true when starting a repair INFO [Thread-7281] 2017-03-17 09:40:32,059 RepairRunnable.java:125 - Starting repair command #7, repairing keyspace xxx with repair options (parallelism: parallel, primary range: false, incremental: true, job threads: 1, ColumnFamilies: [], dataCenters: [ProdDC2], hosts: [], # of ranges: 1758) 3.0.7 is also the reason why we are not using reaper ... as far as i could figure out it's not compatible with 3.0+ On Fri, 2017-03-17 at 22:13 +0100, benjamin roth wrote: It depends a lot ... - Repairs can be very slow, yes! (And unreliable, due to timeouts, outages, whatever) - You can use incremental repairs to speed things up for regular repairs - You can use "reaper" to schedule repairs and run them sliced, automated, failsafe The time repairs actually may vary a lot depending on how much data has to be streamed or how inconsistent your cluster is. 50mbit/s is really a bit low! The actual performance depends on so many factors like your CPU, RAM, HD/SSD, concurrency settings, load of the "old nodes" of the cluster. This is a quite individual problem you have to track down individually. 2017-03-17 22:07 GMT+01:00 Roland Otta <roland.o...@willhaben.at<mailto:roland.o...@willhaben.at>>: hello, we are quite inexperienced with cassandra at the moment and are playing around with a new cluster we built up for getting familiar with cassandra and its possibilites. while getting familiar with that topic we recognized that repairs in our cluster take a long time. To get an idea of our current setup here are some numbers: our cluster currently consists of 4 nodes (replication factor 3). these nodes are all on dedicated physical hardware in our own datacenter. all of the nodes have 32 cores @2,9Ghz 64 GB ram 2 ssds (raid0) 900 GB each for data 1 seperate hdd for OS + commitlogs current dataset: approx 530 GB per node 21 tables (biggest one has more than 200 GB / node) i already tried setting compactionthroughput + streamingthroughput to unlimited for testing purposes ... but that did not change anything. when checking system resources i cannot see any bottleneck (cpus are pretty idle and we have no iowaits). when issuing a repair via nodetool repair -local on a node the repair takes longer than a day. is this normal or could we normally expect a faster repair? i also recognized that initalizing of new nodes in the datacenter was really slow (approx 50 mbit/s). also here i expected a much better performance - could those 2 problems be somehow related? br// roland
