This is a part of the log. If you need more than this please let me know. 2010-08-25 08:17:34 [6800] [5] INFO: mmsbox_mm1.c:659 <start_gprs> [mmsbox-mm1] [n/a] waiting for connection: 0, pid=7470 cpid=0, ifexited=1, exitstatus=5 cat: /var/run/ppp0.pid: No such file or directory 2010-08-25 08:17:39 [6800] [5] INFO: mmsbox_mm1.c:659 <start_gprs> [mmsbox-mm1] [n/a] waiting for connection: 1, pid=7470 cpid=0, ifexited=1, exitstatus=5 cat: /var/run/ppp0.pid: No such file or directory 2010-08-25 08:17:44 [6800] [5] INFO: mmsbox_mm1.c:659 <start_gprs> [mmsbox-mm1] [n/a] waiting for connection: 2, pid=7470 cpid=0, ifexited=1, exitstatus=5 chat: Aug 25 08:17:47 CONNECT 115200 Serial connection established. using channel 38 Using interface ppp0 Connect: ppp0 <--> /dev/ttyUSB0 sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x600b2141> <pcomp> <accomp>] rcvd [LCP ConfRej id=0x1 <magic 0x600b2141>] sent [LCP ConfReq id=0x2 <asyncmap 0x0> <pcomp> <accomp>] rcvd [LCP ConfAck id=0x2 <asyncmap 0x0> <pcomp> <accomp>] 2010-08-25 08:17:49 [6800] [5] INFO: mmsbox_mm1.c:379 <handle_mm1> [mmsbox-mm1] [n/a] start_gprs returned PID: 7470 2010-08-25 08:17:49 [6800] [5] DEBUG: WSP: Mapping `image/gif', WSP 1.2 to 0x001d. rcvd [LCP ConfReq id=0x1 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>] sent [LCP ConfAck id=0x1 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>] sent [PAP AuthReq id=0x1 user="65eideas" password=<hidden>] rcvd [PAP AuthAck id=0x1 "Welcome!"] Remote message: Welcome! PAP authentication succeeded sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15>] sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>] rcvd [IPCP ConfReq id=0x1 <addr 192.168.111.111>] sent [IPCP ConfAck id=0x1 <addr 192.168.111.111>] rcvd [LCP ProtRej id=0x26 80 fd 01 01 00 0c 1a 04 78 00 18 04 78 00] Protocol-Reject for 'Compression Control Protocol' (0x80fd) received rcvd [IPCP ConfNak id=0x1 <addr 10.237.205.147> <ms-dns1 165.21.83.88> <ms-dns3 165.21.100.88>] sent [IPCP ConfReq id=0x2 <addr 10.237.205.147> <ms-dns1 165.21.83.88> <ms-dns3 165.21.100.88>] rcvd [IPCP ConfAck id=0x2 <addr 10.237.205.147> <ms-dns1 165.21.83.88> <ms-dns3 165.21.100.88>] local IP address 10.237.205.147 remote IP address 192.168.111.111 primary DNS address 165.21.83.88 secondary DNS address 165.21.100.88 *Script /etc/ppp/ip-up started (pid 7498)* *Script /etc/ppp/ip-up finished (pid 7498), status = 0x1 2010-08-25 08:20:58 [6800] [5] ERROR: mmsbox_mm1.c:628 <fetch_content> [mmsbox-mm1] [n/a] failed to fetch/post content: couldn't connect to host* 2010-08-25 08:20:58 [6800] [5] DEBUG: Octet string at 0xb4c0ba68: 2010-08-25 08:20:58 [6800] [5] DEBUG: len: 0 2010-08-25 08:20:58 [6800] [5] DEBUG: size: 0 2010-08-25 08:20:58 [6800] [5] DEBUG: immutable: 0 2010-08-25 08:20:58 [6800] [5] DEBUG: Octet string dump ends. *2010-08-25 08:20:58 [6800] [5] ERROR: mmsbox_mm1.c:499 <handle_mm1> [mmsbox-mm1] [n/a] Sending failed: (none), (none)!* 2010-08-25 08:20:58 [6800] [5] INFO: mmsbox_mm1.c:524 <handle_mm1> [mmsbox-mm1] [n/a] GPRS turned off returned: 0 2010-08-25 08:20:58 [6800] [20] INFO: mmsbox_mm1.c:345 <send_msg> [mmsbox-mm1] [n/a] sent message, type=m-send-req, result=(none) 2010-08-25 08:20:58 [6800] [20] INFO: bearerbox.c:1519 <sendMsg> [MM7] [n/a] Retry later MMSBox Outgoing Queue MMS Send: From +xxxxxxxxx/TYPE=PLMN, to xxxxxxxxxx/TYPE=PLMN, msgsize=5517: msgid=[N/A] Terminating on signal 15 Connect time 3.2 minutes. *Sent 300 bytes, received 676 bytes.* Script /etc/ppp/ip-down started (pid 7507) sent [LCP TermReq id=0x3 "User request"] Script /etc/ppp/ip-down finished (pid 7507), status = 0xff rcvd [LCP TermAck id=0x3 "User request"] Connection terminated.
On 25 August 2010 00:36, Emmanuel CHANSON <emmanuelchan...@gmail.com> wrote: > You can reach your MMS-C as you successfully open a telnet connection on > port 8080 so this is something else. > > Try to remove the smil part and send just a text? > > > $url=$path."?username=$username&password=$password&to=xxxxxxxxxx&subject=MBUNI&text=test"; > > Other thing > Try to check your logs to see if the fetch error happens before ppp0 > connection is up? > Maybe Mbuni try to send the MMS before the ppp0 connection and/or routing > is done in order to reach MMS-C. > > Check also that /var/run/ppp0-mbuni.pid is correclty removed after each > connection close. > Try to delete it by hand before a test if it was present. > > Mbuni wait until the ppp0-mbuni.pid file is created (by ip-up script) and > then will send MMS. > > Post your full logs in case of problem. > > > Emmanuel > > 2010/8/25 Michel TOKO <tokomic...@gmail.com> > >> telnet 165.21.42.84 8080 >> Trying 165.21.42.84... >> Connected to 165.21.42.84 (165.21.42.84). >> Escape character is '^]'. >> >> >> posting the mms, i run a php script : >> >> >> $url=$path."?username=$username&password=$password&to=xxxxxxxxxx&subject=MBUNI&smil=$smil"; >> >> where $path= http://xxx.xxx.xxx.xxx:10001/cgi-bin/sendmms and $smil is a >> simple smil file contaning a gif image >> >> thanks >> >> >> On 24 August 2010 23:59, Emmanuel CHANSON <emmanuelchan...@gmail.com>wrote: >> >>> Yes it should be ok >>> >>> Try to reach your MMS-C using *"telnet 165.21.42.84 8080"* when ppp0 is >>> up and rounting is done. >>> Or do this test with mbuni stop and launch ppd by hand *'pppd call >>> mobile-auth'* >>> >>> If you succeed then maybe you post a bad MMS. What is the command you run >>> to post a MMS to Mbuni ? >>> >>> Emmanuel >>> >>> 2010/8/25 Michel TOKO <tokomic...@gmail.com> >>> >>>> sorry, >>>> >>>> >>>> netstat -rn >>>> Kernel IP routing table >>>> Destination Gateway Genmask Flags MSS Window irtt >>>> Iface >>>> 192.168.111.111 0.0.0.0 255.255.255.255 UH 0 0 0 >>>> ppp0 >>>> 165.21.42.84 0.0.0.0 255.255.255.255 UH 0 0 0 >>>> ppp0 >>>> xxx.xxx.xxx.xxx 0.0.0.0 255.255.255.248 U 0 0 >>>> 0 eth0 >>>> 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 >>>> eth0 >>>> 0.0.0.0 xxx.xxx.xxx.xxx 0.0.0.0 UG 0 0 >>>> 0 eth0 >>>> >>>> is it normal ? >>>> >>>> >>>> On 24 August 2010 23:38, Michel TOKO <tokomic...@gmail.com> wrote: >>>> >>>>> Emmanuel, resultat du netstat, >>>>> netstat -rn >>>>> Kernel IP routing table >>>>> Destination Gateway Genmask Flags MSS Window >>>>> irtt Iface >>>>> 192.168.111.111 0.0.0.0 255.255.255.255 UH 0 0 >>>>> 0 ppp0 >>>>> 165.21.42.84 0.0.0.0 255.255.255.255 UH 0 0 >>>>> 0 ppp0 >>>>> xxx.xxx.xxx.xxx 0.0.0.0 255.255.255.248 U 0 0 >>>>> 0 eth0 >>>>> 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 >>>>> 0 eth0 >>>>> 0.0.0.0 xxx.xxx.xxx.xxx 0.0.0.0 UG 0 0 >>>>> 0 eth0 >>>>> >>>>> un problème ici ? >>>>> >>>>> >>>>> >>>>> On 24 August 2010 23:33, Michel TOKO <tokomic...@gmail.com> wrote: >>>>> >>>>>> Yes i did. >>>>>> >>>>>> *port=8080;mmsc-url= >>>>>> http://xxx.xxx.xxx.xxx:10021/mmsc;proxy=165.21.42.84:8080;msisdn=100"; >>>>>> * >>>>>> >>>>>> >>>>>> On 24 August 2010 23:24, Emmanuel CHANSON >>>>>> <emmanuelchan...@gmail.com>wrote: >>>>>> >>>>>>> Michel, >>>>>>> >>>>>>> >>>>>>> *in my config file the mmsc proxy is set as suggested. >>>>>>> ** >>>>>>> mmsc-url= >>>>>>> http://xxx.xxxxxxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"; >>>>>>> * >>>>>>> Did you replace these values by your config used in your provider >>>>>>> network ? >>>>>>> ie: your mmsc ip address & your mmsc port ? and mms url ? >>>>>>> >>>>>>> You have to. >>>>>>> >>>>>>> Otherwise second solution below with routing. >>>>>>> >>>>>>> Emmanuel >>>>>>> >>>>>>> 2010/8/25 Michel TOKO <tokomic...@gmail.com> >>>>>>> >>>>>>> Thanks Emmanuel, >>>>>>>> >>>>>>>> in my config file the mmsc proxy is set as suggested. >>>>>>>> * >>>>>>>> mmsc-url= >>>>>>>> http://xxx.xxxxxxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"; >>>>>>>> >>>>>>>> May be i've to check your second advice >>>>>>>> >>>>>>>> * >>>>>>>> maybe you can not reach your mms-c cause of some routing not >>>>>>>> configured, check your routing table after ppp0 is up and you can try >>>>>>>> to >>>>>>>> "telnet mms-c_ip mmsc_port" to see if you reach it. >>>>>>>> >>>>>>>> If not then you have to add a route to reach it, by hand first to >>>>>>>> test, then inside /etc/ppp/ip-up. >>>>>>>> >>>>>>>> Will get back to you very soon. >>>>>>>> >>>>>>>> Thanks >>>>>>>> >>>>>>>> >>>>>>>> On 24 August 2010 22:27, Emmanuel CHANSON < >>>>>>>> emmanuelchan...@gmail.com> wrote: >>>>>>>> >>>>>>>>> Hello Michel, >>>>>>>>> >>>>>>>>> >>>>>>>>> *...... >>>>>>>>> **2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:628 >>>>>>>>> <fetch_content> [mmsbox-mm1] [n/a] failed to fetch/post content: >>>>>>>>> couldn't >>>>>>>>> connect to host >>>>>>>>> 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string at 0xb600f748: >>>>>>>>> 2010-08-25 05:00:01 [5301] [5] DEBUG: len: 0 >>>>>>>>> 2010-08-25 05:00:01 [5301] [5] DEBUG: size: 0 >>>>>>>>> 2010-08-25 05:00:01 [5301] [5] DEBUG: immutable: 0 >>>>>>>>> 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string dump ends. >>>>>>>>> 2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:499 >>>>>>>>> <handle_mm1> [mmsbox-mm1] [n/a] Sending failed: (none), (none)! >>>>>>>>> 2010-08-25 05:00:01 [5301] [5] INFO: mmsbox_mm1.c:524 <handle_mm1> >>>>>>>>> [mmsbox-mm1] [n/a] GPRS turned off returned: 0 >>>>>>>>> ......* >>>>>>>>> >>>>>>>>> I think Mbuni can not reach your MMS-C (provider), so try to see if >>>>>>>>> your MMS-C proxy address and port is correct inside mmsbox.conf: >>>>>>>>> >>>>>>>>> In my case: >>>>>>>>> >>>>>>>>> *custom-settings = "gprs-on=pppd call mobile-auth;gprs-pid=cat >>>>>>>>> /var/run/ppp0-mbuni.pid|head -1;port=3130;mmsc-url= >>>>>>>>> http://xxx.xxxxxxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"* >>>>>>>>> >>>>>>>>> this part: >>>>>>>>> >>>>>>>>> *mmsc-url= >>>>>>>>> http://xxx.xxxxxxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"; >>>>>>>>> >>>>>>>>> * >>>>>>>>> I think your problem may be here.* >>>>>>>>> >>>>>>>>> **Or * >>>>>>>>> maybe you can not reach your mms-c cause of some routing not >>>>>>>>> configured, check your routing table after ppp0 is up and you can try >>>>>>>>> to >>>>>>>>> "telnet mms-c_ip mmsc_port" to see if you reach it. >>>>>>>>> >>>>>>>>> If not then you have to add a route to reach it, by hand first to >>>>>>>>> test, then inside /etc/ppp/ip-up. >>>>>>>>> >>>>>>>>> Regards, >>>>>>>>> >>>>>>>>> Emmanuel >>>>>>>>> >>>>>>>>> 2010/8/24 Michel TOKO <tokomic...@gmail.com> >>>>>>>>> >>>>>>>>>> HI Emmanuel, ppp connection is ok using your config but still >>>>>>>>>> getting : >>>>>>>>>> >>>>>>>>>> ...... >>>>>>>>>> *2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:628 >>>>>>>>>> <fetch_content> [mmsbox-mm1] [n/a] failed to fetch/post content: >>>>>>>>>> couldn't >>>>>>>>>> connect to host >>>>>>>>>> 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string at 0xb600f748: >>>>>>>>>> 2010-08-25 05:00:01 [5301] [5] DEBUG: len: 0 >>>>>>>>>> 2010-08-25 05:00:01 [5301] [5] DEBUG: size: 0 >>>>>>>>>> 2010-08-25 05:00:01 [5301] [5] DEBUG: immutable: 0 >>>>>>>>>> 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string dump ends. >>>>>>>>>> 2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:499 >>>>>>>>>> <handle_mm1> [mmsbox-mm1] [n/a] Sending failed: (none), (none)! >>>>>>>>>> 2010-08-25 05:00:01 [5301] [5] INFO: mmsbox_mm1.c:524 <handle_mm1> >>>>>>>>>> [mmsbox-mm1] [n/a] GPRS turned off returned: 0* >>>>>>>>>> ...... >>>>>>>>>> >>>>>>>>>> Please did use solve this issue? >>>>>>>>>> >>>>>>>>>> tail -f /var/log/messages >>>>>>>>>> * >>>>>>>>>> ...... >>>>>>>>>> Aug 25 04:56:49 localhost pppd[5547]: Serial connection >>>>>>>>>> established. >>>>>>>>>> Aug 25 04:56:49 localhost pppd[5547]: Using interface ppp0 >>>>>>>>>> Aug 25 04:56:49 localhost pppd[5547]: Connect: ppp0 <--> >>>>>>>>>> /dev/ttyUSB0 >>>>>>>>>> Aug 25 04:56:53 localhost pppd[5547]: Remote message: Welcome! >>>>>>>>>> Aug 25 04:56:53 localhost pppd[5547]: PAP authentication succeeded >>>>>>>>>> Aug 25 04:56:53 localhost pppd[5547]: local IP address >>>>>>>>>> 10.236.24.83 >>>>>>>>>> Aug 25 04:56:53 localhost pppd[5547]: remote IP address >>>>>>>>>> 192.168.111.111 >>>>>>>>>> Aug 25 04:56:53 localhost pppd[5547]: primary DNS address >>>>>>>>>> 165.21.83.88 >>>>>>>>>> Aug 25 04:56:53 localhost pppd[5547]: secondary DNS address >>>>>>>>>> 165.21.100.88 >>>>>>>>>> Aug 25 05:00:01 localhost pppd[5547]: Terminating on signal 15 >>>>>>>>>> Aug 25 05:00:01 localhost pppd[5547]: Connect time 3.2 minutes. >>>>>>>>>> Aug 25 05:00:01 localhost pppd[5547]: Sent 300 bytes, received 0 >>>>>>>>>> bytes. >>>>>>>>>> .....* >>>>>>>>>> >>>>>>>>>> Thanks >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On 24 August 2010 20:54, Emmanuel CHANSON < >>>>>>>>>> emmanuelchan...@gmail.com> wrote: >>>>>>>>>> >>>>>>>>>>> Thanks to Piotr who help me with pppd >>>>>>>>>>> >>>>>>>>>>> BR >>>>>>>>>>> >>>>>>>>>>> Emmanuel >>>>>>>>>>> >>>>>>>>>>> 2010/8/24 Michel TOKO <tokomic...@gmail.com> >>>>>>>>>>> >>>>>>>>>>> Thanks Emmanuel will get back to you. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Merci! >>>>>>>>>>>> >>>>>>>>>>>> On 24 August 2010 09:45, Emmanuel CHANSON < >>>>>>>>>>>> emmanuelchan...@gmail.com> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> Nokia 6230 config with Mbuni latest CVS: >>>>>>>>>>>>> >>>>>>>>>>>>> /etc/mbuni/mmsbox.conf: >>>>>>>>>>>>> ------------------------------------- >>>>>>>>>>>>> ... >>>>>>>>>>>>> # Sample conf for MMSBox using a modem (MM1) >>>>>>>>>>>>> group = mmsc >>>>>>>>>>>>> #id = modem >>>>>>>>>>>>> id = nokiaphone >>>>>>>>>>>>> type = custom >>>>>>>>>>>>> custom-settings = "gprs-on=pppd call mobile-auth;gprs-pid=cat >>>>>>>>>>>>> /var/run/ppp0-mbuni.pid|head -1;port=3130;mmsc-url= >>>>>>>>>>>>> http://xxx.xxxxxxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100 >>>>>>>>>>>>> " >>>>>>>>>>>>> mmsc-library = /usr/local/mbuni/lib/libmmsbox_mm1.so >>>>>>>>>>>>> ... >>>>>>>>>>>>> >>>>>>>>>>>>> /etc/ppp/peers/mobile-auth: >>>>>>>>>>>>> ---------------------------------------- >>>>>>>>>>>>> file /etc/ppp/peers/options-mobile >>>>>>>>>>>>> user "<your_login>" >>>>>>>>>>>>> password "<your_password>" >>>>>>>>>>>>> connect "/usr/sbin/chat -v -t15 -f >>>>>>>>>>>>> /etc/ppp/chatscripts/mobile-modem.chat" >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> /etc/ppp/peers/options-mobile: >>>>>>>>>>>>> -------------------------------------------- >>>>>>>>>>>>> ttyACM0 >>>>>>>>>>>>> 115200 >>>>>>>>>>>>> lock >>>>>>>>>>>>> crtscts >>>>>>>>>>>>> modem >>>>>>>>>>>>> passive >>>>>>>>>>>>> novj >>>>>>>>>>>>> nodefaultroute >>>>>>>>>>>>> nodetach >>>>>>>>>>>>> noipdefault >>>>>>>>>>>>> usepeerdns >>>>>>>>>>>>> noauth >>>>>>>>>>>>> hide-password >>>>>>>>>>>>> persist >>>>>>>>>>>>> holdoff 10 >>>>>>>>>>>>> maxfail 0 >>>>>>>>>>>>> debug >>>>>>>>>>>>> >>>>>>>>>>>>> /etc/ppp/chatscripts/mobile-modem.chat: >>>>>>>>>>>>> ----------------------------------------------------------- >>>>>>>>>>>>> ABORT 'BUSY' >>>>>>>>>>>>> ABORT 'NO CARRIER' >>>>>>>>>>>>> ABORT 'VOICE' >>>>>>>>>>>>> ABORT 'NO DIALTONE' >>>>>>>>>>>>> ABORT 'NO DIAL TONE' >>>>>>>>>>>>> ABORT 'NO ANSWER' >>>>>>>>>>>>> ABORT 'DELAYED' >>>>>>>>>>>>> REPORT CONNECT >>>>>>>>>>>>> TIMEOUT 6 >>>>>>>>>>>>> '' 'ATQ0' >>>>>>>>>>>>> 'OK-AT-OK' 'ATZ' >>>>>>>>>>>>> TIMEOUT 3 >>>>>>>>>>>>> 'OK' @/etc/ppp/chatscripts/pin.NONE >>>>>>>>>>>>> 'OK-AT-OK' 'ATI' >>>>>>>>>>>>> 'OK' 'ATZ' >>>>>>>>>>>>> 'OK' @/etc/ppp/chatscripts/mode.NONE >>>>>>>>>>>>> 'OK-AT-OK' @/etc/ppp/chatscripts/apn >>>>>>>>>>>>> 'OK' 'ATDT*99***1#' >>>>>>>>>>>>> TIMEOUT 30 >>>>>>>>>>>>> CONNECT '' >>>>>>>>>>>>> >>>>>>>>>>>>> /etc/ppp/chatscripts/mode.NONE: >>>>>>>>>>>>> ------------------------------------------------- >>>>>>>>>>>>> AT >>>>>>>>>>>>> >>>>>>>>>>>>> /etc/ppp/chatscripts/pin.NONE: >>>>>>>>>>>>> --------------------------------------------- >>>>>>>>>>>>> AT >>>>>>>>>>>>> >>>>>>>>>>>>> /etc/ppp/chatscripts/apn: >>>>>>>>>>>>> ------------------------------------ >>>>>>>>>>>>> AT+CGDCONT=1,"IP","<your_mms_apn>" >>>>>>>>>>>>> >>>>>>>>>>>>> You need 2 additionnal scripts to be launched when modem got >>>>>>>>>>>>> the connection: >>>>>>>>>>>>> >>>>>>>>>>>>> /etc/ppp/ip-up: >>>>>>>>>>>>> -------------------- >>>>>>>>>>>>> #!/bin/sh >>>>>>>>>>>>> IFNAME="$1" >>>>>>>>>>>>> LOCAL_IP="$4" >>>>>>>>>>>>> REMOTE_IP="$5" >>>>>>>>>>>>> IPPARAM="$6" >>>>>>>>>>>>> MMS_PROXY="192.168.39.201" >>>>>>>>>>>>> /sbin/ip route add to 192.168.39.201 dev ppp0 >>>>>>>>>>>>> # routing has been set up, so: >>>>>>>>>>>>> ln -sf /var/run/ppp0.pid /var/run/ppp0-mbuni.pid >>>>>>>>>>>>> >>>>>>>>>>>>> /etc/ppp/ip-down: >>>>>>>>>>>>> ------------------------- >>>>>>>>>>>>> # remove pid file >>>>>>>>>>>>> rm -rf /var/run/ppp0-mbuni.pid >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Regards, >>>>>>>>>>>>> >>>>>>>>>>>>> Emmanuel >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> 2010/8/24 patrick meye <patrick_m...@yahoo.fr> >>>>>>>>>>>>> >>>>>>>>>>>>>> Hi Emmanuel, >>>>>>>>>>>>>> >>>>>>>>>>>>>> I need config files using Nokia 6230,can you send it to me >>>>>>>>>>>>>> please?? >>>>>>>>>>>>>> >>>>>>>>>>>>>> Regards. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Patrick >>>>>>>>>>>>>> >>>>>>>>>>>>>> ------------------------------ >>>>>>>>>>>>>> *De :* Emmanuel CHANSON <emmanuelchan...@gmail.com> >>>>>>>>>>>>>> *À :* users@mbuni.org >>>>>>>>>>>>>> *Envoyé le :* Mar 24 août 2010, 0h 59min 12s >>>>>>>>>>>>>> *Objet :* [Users] Mbuni & Huawei E220 >>>>>>>>>>>>>> >>>>>>>>>>>>>> Does anyone has already configured a Huawei E220 with Mbuni >>>>>>>>>>>>>> and pppd ? >>>>>>>>>>>>>> >>>>>>>>>>>>>> I am looking for any config with E220. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Note: I use actually a Nokia 6230 that work well if anybody >>>>>>>>>>>>>> needs config files. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Regards, >>>>>>>>>>>>>> >>>>>>>>>>>>>> -- >>>>>>>>>>>>>> Emmanuel >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>> Users mailing list >>>>>>>>>>>>> Users@mbuni.org >>>>>>>>>>>>> http://lists.mbuni.org/mailman/listinfo/users >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>> Users mailing list >>>>>>>>>>>> Users@mbuni.org >>>>>>>>>>>> http://lists.mbuni.org/mailman/listinfo/users >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> Emmanuel >>>>>>>>>>> >>>>>>>>>>> CHANSON Emmanuel >>>>>>>>>>> Mobile Nouvelle-Calédonie: +687.77.35.02 >>>>>>>>>>> Mobile France: +33 (0) 6.68.03.89.56 >>>>>>>>>>> @email : emmanuelchan...@gmail.com >>>>>>>>>>> >>>>>>>>>>> _______________________________________________ >>>>>>>>>>> Users mailing list >>>>>>>>>>> Users@mbuni.org >>>>>>>>>>> http://lists.mbuni.org/mailman/listinfo/users >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> _______________________________________________ >>>>>>>>>> Users mailing list >>>>>>>>>> Users@mbuni.org >>>>>>>>>> http://lists.mbuni.org/mailman/listinfo/users >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> _______________________________________________ >>>>>>>>> Users mailing list >>>>>>>>> Users@mbuni.org >>>>>>>>> http://lists.mbuni.org/mailman/listinfo/users >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> Users mailing list >>>>>>>> Users@mbuni.org >>>>>>>> http://lists.mbuni.org/mailman/listinfo/users >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> Emmanuel >>>>>>> >>>>>>> CHANSON Emmanuel >>>>>>> Mobile Nouvelle-Calédonie: +687.77.35.02 >>>>>>> Mobile France: +33 (0) 6.68.03.89.56 >>>>>>> @email : emmanuelchan...@gmail.com >>>>>>> >>>>>>> _______________________________________________ >>>>>>> Users mailing list >>>>>>> Users@mbuni.org >>>>>>> http://lists.mbuni.org/mailman/listinfo/users >>>>>>> >>>>>>> >>>> >>>> >>>> -- >>>> >>>> _______________________________________________ >>>> Users mailing list >>>> Users@mbuni.org >>>> http://lists.mbuni.org/mailman/listinfo/users >>>> >>>> >>> _______________________________________________ >>> Users mailing list >>> Users@mbuni.org >>> http://lists.mbuni.org/mailman/listinfo/users >>> >>> >> _______________________________________________ >> Users mailing list >> Users@mbuni.org >> http://lists.mbuni.org/mailman/listinfo/users >> >> > > _______________________________________________ > Users mailing list > Users@mbuni.org > http://lists.mbuni.org/mailman/listinfo/users > >
_______________________________________________ Users mailing list Users@mbuni.org http://lists.mbuni.org/mailman/listinfo/users
