James R. Frysinger
Wed, 03 Feb 2010 07:32:54 -0800
The draft of the new edition of IEEE/ASTM SI 10 has entered the balloting process in IEEE and ASTM. It must be successful in both organizations' ballots. Once approved by both organizations, it will go to print, proofing, then release. This may take a few more months.
Jim Frysinger Chair, IEEE SCC 14 Vice Chair, IEEE/ASTM Joint Committee for Maintaining SI 10 Patrick Moore wrote:
Apparently the revision of ASTM SI-10 has not been published yet: <http://grouper.ieee.org/groups/si10/index.html>.------------------------------------------------------------------------ *From: *Patrick Moore <pmo...@asnt.org> *Date: *Thu, 16 Apr 2009 08:16:51 -0400 *To: *Publication - Mail <publication-m...@asnt.org> *Subject: *IEEE/ASTM SI-10See below for a link to an errata page for ASTM's SI standard which some of us use. The whole thing will be superseded by a new edition early next year.------ Forwarded Message From: "James R. Frysinger" <j...@metricmethods.com> Reply-To: <j...@metricmethods.com> Date: Wed, 15 Apr 2009 16:09:24 -0500 To: "U.S. Metric Association" <usma@colostate.edu> Subject: [USMA:44690] Re: IEEE/ASTM SI-10 John is correct on the date of the latest edition. It is indeed IEEE/ASTM SI 10-2002. Another link for purchase of SI 10 and an errata sheet for it is via the IEEE publications page at <http://ieee.org/web/publications/home/index.html>. A new edition is being developed in the revision process. Here is the status: -- Proposed Change Items (PCIs) have been submitted by members of the joint IEEE/ASTM committee, based on their thoughts and those of their colleagues. This process has been going on for about a year. -- A red-lined draft has been proposed to the committee, based on those PCIs. -- IEEE Standards Coordinating Committee 14 (SCC 14) will discuss this red-lined draft on the morning of April 23. I do not know if ASTM E43 (the SCC 14 counterpart) has met or when they will meet. Essentially, those two committees provide members to the joint IEEE/ASTM committee. -- The joint committee will meet after noon on April 23 to discuss the red-lined draft. -- Comments and decisions from this joint committee meeting will be incorporated into the red-lined draft on a consensus basis and a final draft will be constructed. -- That final draft will itself go through IEEE SCC 14 and ASTM E43 and then through the joint committee. If approved it will be put up for publication. If not, another draft will be needed. -- Once typeset, the galley proofs will need review and emendation. Once those are approved, the new edition of SI 10 will be published. I estimate that we will have a new edition of SI 10 out by the end of 2009 or, failing that, by the early part of 2010. Please do not ask me to send you a copy of the red-lined draft or the list of PCIs. Copyright assertions prohibit me from sending those out. Jim Frysinger Chair, IEEE SCC 14 Vice Chair, IEEE/ASTM Joint Committee for Maintaining SI 10 John M. Steele wrote:Latest edition is 2002. Here is a link to it at ANSI: http://webstore.ansi.org/RecordDetail.aspx?sku=SI10-2002That edition corresponds to 7th edition of SI Brochure. I understand itis currently being revised to latest edition of SI Brochure and NIST SP 330. I don't know the schedule, or the extent of revisions. .--- On *Wed, 4/15/09, Patrick Moore /<pmo...@asnt.org>/*<pmo...@asnt.org>/*> wrote:From: Patrick Moore <pmo...@asnt.org> Subject: [USMA:44687] IEEE/ASTM SI-10 To: "U.S. Metric Association" <usma@colostate.edu> Date: Wednesday, April 15, 2009, 11:29 AMWhat is the latest publication year/edition of IEEE/ASTM SI-10,"Standardfor the Use of the International System of Units (SI): The ModernMetricSystem"?It is difficult to find it in the ASTM catalog or website or theIEEE site:many documents reference it but the standard itself does not comeup, for meanyway. Thanks.-- James R. Frysinger 632 Stony Point Mountain Road Doyle, TN 38559-3030 (C) 931.212.0267 (H) 931.657.3107 (F) 931.657.3108 ------ End of Forwarded Message
-- James R. Frysinger 632 Stony Point Mountain Road Doyle, TN 38559-3030 (C) 931.212.0267 (H) 931.657.3107 (F) 931.657.3108