On Tue, Jul 10, 2007 at 03:15:52PM +1000, Paul Ripke wrote: > Hi, > > What is the current status of support for the NVIDIA GeForce 6150 LE? > I've manually pulled up the support in the 'nv' driver to XFree86 > 4.5.0 under NetBSD 4.0_BETA2 on i386. Prior to pulling up the > support, it would configure using the vesa driver. My monitor is a > 1680x1050 native LCD, which obviously isn't a valid VESA mode. > Running with the pulled-up 'nv' support, it fails to get DDC info, > and with a manually configured 1680x1050 modeline, looks pretty > horrible - bad aliasing effects and quite wavy. > > I also tried Knoppix 5.1.1 which runs some Xorg version... looks fine > with 'nv' running 1280x1024, but monitor gets an 'out of range' > forcing it to 1680x1050 with the same modeline as above. > > I'm now building from CVS tag xf-4_6_99_27 and will give that a go, > although I can't see any relevant changes. > > FYI: my current start log with the pulled up changes can be found > here: > ftp://stix.id.au/pub/tmp/XFree86-nv.log
Following up on my own email: I've built XFree86 4.6.99.27 from CVS and get the same behaviour. Log when using the vesa driver: ftp://stix.id.au/pub/tmp/XFree86-4.6.99.27-vesa.log Log when using the nv driver: ftp://stix.id.au/pub/tmp/XFree86-4.6.99.27-nv.log Photo of screen running 1680x1050 with the nv driver: ftp://stix.id.au/pub/tmp/1680x1050.jpg The config used for the nv driver: ftp://stix.id.au/pub/tmp/XF86Config An additional data point is that when running with the nv driver and the 1680x1050 modeline, the LCD monitor reports [EMAIL PROTECTED], so something is very screwy. Any ideas? Thanks, -- Paul Ripke _______________________________________________ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
