My MaxPower G3 is designed to replace the angle bracket that mounts a video card perpendicular to the processor direct card in a 61xx. The G3 card plugs into the motherboard and the video card plugs into the G3 card and lies flat under the hood when you reattach it. You might want to check your accelerator card and see if it features such a socket along one of the sides at the top.
cw -- > From: Boris Herman <[EMAIL PROTECTED]> > Reply-To: "1st PowerMacs" <[EMAIL PROTECTED]> > Date: Tue, 21 Oct 2003 21:53:41 +0200 > To: "1st PowerMacs" <[EMAIL PROTECTED]> > Subject: 6100 G3 and HPV/AV > > Hi list, > > is there a way to use a CPU upgrade AND a HPV or AV video card in a > 6100? I am currently using a HPV video card in the 6100/66 but would > hate going back to motherboard video if I installed a G3 upgrade... > > Regards, > Boris -- 1st-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> 1st PowerMacs list info: <http://lowendmac.com/lists/1st-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> List archive: <http://mail.maclaunch.com/lists/1st-powermacs/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
