>oh, still wasn't able to get the jackhammer to work on my 8100/80. it did >work on my 8100/100, but due to the lower bus speed on the 8100/100 the 300 >MHz G3 is now a 266, SIGH.......
Works on my 9150/80 and 9150/120, so I suspect it will work on your 8100 (both speeds). The 9150 mobo is actually an 8100 mobo on steroids. Get the FWB firmware, which is actually contained within the control panel for the card. With that control panel, you can force loading of the latest F/W at will. I've use the Jackhammer alone and with G3 cards from 220/110 and 240/120 (both 512 KB cache) to 300/150 and 320/160 (both 1024 KB cache). Note that the 320/160 card actually has a 350 MHz copper G3 chip. (The 333 MHz copper G3s will easily go to 350 MHz in Beige G3s, and my guess is that 350 MHz copper G3 can go to 400 MHz). Has anyone overclocked these NewerTech PDS-type G3 cards? -- 1st-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> 1st PowerMacs list info: <http://lowendmac.com/lists/1st-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> List archive: <http://mail.maclaunch.com/lists/1st-powermacs/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
