Trevor Zylstra
On Dec 2, 2003, at 1:30 PM, Jim Page wrote:
got a weird one here, was wondering if anyone can recreate and/or confirm
- PowerMac 8100/80, MACOS 8.6, 264M, seagate ST39216N - 9 Gig 50 pin drive
- using Hard Disk Toolkit 2.0 to initialize 9G disk as a 9G partition and
then boot
problem: - 8100/80 refuses to boot from 9G disk with good Sys folder
other info:
- 8100/100 boots fine from the 9G with HDT driver
- 8100/80 boots fine with <2G partition with HDT driver
- tried several 8100/80 system boards, all refuse to boot with >2G
partitions
- also tried HDT 4.5, same problem
- 8100/100 has a slower bus speed, so it clocks down my 300Mhz G3 to 266,
ARGHH
- contacted FWB support, no help, they say use <2G partitions
- double - ARGHH !!!!
was wondering if anyone can confirm that their 8100/80 can't boot from a >
2G HDT partition
extra credit.... - to see if an 8100/110 can boot from a > 2G HDT partition
TIA,
jim
-- 1st-PowerMacs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
1st PowerMacs list info: <http://lowendmac.com/lists/1st-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> List archive: <http://mail.maclaunch.com/lists/1st-powermacs/>
---------------------------------------------------------------
The Think Different Store
http://www.ThinkDifferentStore.com ---------------------------------------------------------------
