pamark wrote: > Hi, > > Thanks all. Scsi probe or disk utility will not see the drive. I tried termination > with the 535 but it didn't seem to make a difference. I will > have to try it with the 6100. I will also try the ID number but I don't think that > is the problem. It is set to ID 2. Isn't the CD set to ID3 > by default ? and it is the external device on the 6100. > Thanks to all that answered. I will let you know. > > Happy Holidays, > Pam
It is always possible that the ID selector switch has become disconnect inside the case. The 6100 only has one SCSI bus and it is shared by all internal and external devices therefore you cannot have duplicate IDs even if one is inside and the other is outside. SCSI probe will tell you the IDs of the internal HD and CD. Is the external drive spinning up? David -- 1st-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> 1st PowerMacs list info: <http://lowendmac.com/lists/1st-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> List archive: <http://mail.maclaunch.com/lists/1st-powermacs/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
