----- Original Message ----- From: <[EMAIL PROTECTED]> To: "1st PowerMacs" <[EMAIL PROTECTED]> Sent: Thursday, January 15, 2004 6:07 AM Subject: Imagewriters
> Thanks to all who have tried to help me with this problem. So far, I am > still dead in the water. I have: > > run the printer self test successfully > made sure the ribbon is good > checked the DIP switches to make sure they're set right > checked whether or not it is an appletalk setting > made sure the cables are good > made sure the cover is closed > selected "Imagewriter" in the chooser > checked to make sure the correct port is selected > checked 'page setup' to make sure the printer is correct > made sure the "Select" light is on on the printer and would like them to work! :) > > Thanks in advance! > Peggy Gould If you're running the ImageWriter as a networked printer, it needs the card. Just run it as the ImageWriter without the network cabled-icon, and with the serial cable connected, and be sure you have the cable in the printer socket and that it is set as being connected to the printer socket in the chooser. Jeff G. -- 1st-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> 1st PowerMacs list info: <http://lowendmac.com/lists/1st-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> List archive: <http://mail.maclaunch.com/lists/1st-powermacs/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
