on 2/17/04 3:30 PM, Chip Matteson wrote: >Next Question: I am running an iBook 500 with OS X. Can I set-up the 7100/66 >as a printer hub through Ethernet to print to a Personal Laser Writer 320 >from the iBook through the 7100? Should I just set-up the 320 with a direct >Ethernet link to the iBook? Should I email the doc I want to print to the >7100 and print from there?
Run the LocalTalk Bridge (or LaserWriter Bridge) on the 7100. That will make your LocalTalk laser printer available as an AppleTalk printer on the ethernet network. You will then be able to print directly from applications on any networked Mac. Since the 320 is Postscript Level 2 it should be compatible with OS X. But the memory in that model is extremely limited, so you will want to use only the built-in fonts. -- 1st-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> 1st PowerMacs list info: <http://lowendmac.com/lists/1st-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> List archive: <http://mail.maclaunch.com/lists/1st-powermacs/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
