> > Are you, by any chance, having trouble starting it up? > >In my experience, the 17-inch Multiscan (IINM), has to be connected through >the KVM switch to the CPU at boot-up to work. > >When mine isn't, [perhaps the CPU is connected to a smaller monitor] the >17-inch m/s won't even start. > > HTH, > >Paul >
Hi Paul; Haven't talked with ya in a long time. Thanks for the response. Its not giving me any 'start up' problem that I can identify 'as' a start up problem. I thought of that and made sure to do a cold start. I figured that if the switch box was not set on the active monitor, it might be unable to identify what resolution it needed...so that seemed a logical way to end up with black screen. >From Peter's description of the kvm being pass through, I'm guessing that is a possible way of having the black screen if the switch is set 'wrong', ...but I'll admit not understanding how the video works well enough to be sure. Don -- 1st-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> 1st PowerMacs list info: <http://lowendmac.com/lists/1st-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> List archive: <http://mail.maclaunch.com/lists/1st-powermacs/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
