----- Original Message -----
From: "Clark Martin" <[EMAIL PROTECTED]>
To: "1st PowerMacs" <[EMAIL PROTECTED]>
Sent: Sunday, March 28, 2004 9:17 AM
Subject: Re: Performa 6200CD power-up problem


> At 7:53 PM -0800 3/27/04, [EMAIL PROTECTED] wrote:
>
>
> Check the voltage from the disk drive power connect for +5 and +12
>

OK, testing power supply output is the next step.

>
> It may be starting up and then shutting down which would still
> produce the click.
>
> The fuse body is ceramic.  Try doing a resistance check on the fuse,
> it should read 0 ohms.
>
> Many components in the power supply can fail with no visible sign.
>

What would cause it to start up, and then shut down?  A faulty circuit
somewhere on the power supply board?

A ceramic fuse body... That makes more sense.

> That's the Cuda button.  It is something of a Super PRAM Zap.
>

How is it used?  Is what I did the correct procedure: hold it down for
about 30 seconds?

>
> It is quite reasonable to test a new battery, one never knows how
> long they may have sat on a shelf.  Also try testing it a few days
> after putting it in the computer.  If there is a fault in the PRAM
> circuitry it could drain the battery down.
>

OK.

>
> The next step in testing would be to find another logic board and/or
> power supply to test with.  I recently bought a used Beige G3 which
> wouldn't start up.  I was able to test it with another identical
> model and it turned out to be the logic board.

Unfortunately, I am not going to spend a lot of money to get this thing
fixed.  I get older PowerMacs and vintage/compact Macs free from school
systems and universities in western Washington.  I just happened to come
across a 6200 that otherwise looks to be in *PRISTINE* condition that I
thought would make a good testing machine for my sister's web development.
As I get these things for free, I am not looking to put a lot of money
into them to get them running.  The new 4.5 volt alkaline battery itself
already ran me $18.50 (the an expensive damn battery) and a new power
supply or logic board would be along the same lines, after shipping
charges. If not more.  That's easily $40 or more right there when I could
spend less than half that to simply buy a whole new *even faster* Mac.
And as I get them for free, there is no need to spend money on a new
system at all.

All the systems I get from schools and whatnot have all been claimed to
*work* up until the time they got rid of them (gave them to me), which is
why this situation puzzles me.  I have acquired nearly 100 Mac's of
different vintages (though none newer than a first generation PowerMac) in
this manner, and this is the *only one* I have had any problems with to
date.  Philip Storz suggested that the power supplies are very volatile on
these, and can be rendered useless simply from a move of locations.  In
this situation, this scenario sounds the most feasible since the machine
was claimed to work before I got hold of it.

Anyway, I will take the voltometer to the disk drive power connector next
to make sure the power supply is doing what it's supposed to.  If it looks
like the power supply is bad, I will try to get a hold of one through a
trade (I have an entire room full of older Macintosh parts) rather than
buying one.  If it looks like the logic board is at fault, I will attempt
to do the same for that.  If nobody is interested in trading either of
these for something I've got, well.... I've got a PowerMac 6360 on the way
that I will donate to my sister, instead, and simply part-out the 6200.
Though I had *hoped* to be able to keep the 6360 for my own collection.

Thanks,
  Nat


------------
Nat Hall
[EMAIL PROTECTED]
------------

-- 
1st-PowerMacs is sponsored by <http://lowendmac.com/> and...

 Small Dog Electronics    http://www.smalldog.com | Refurbished Drives |
 -- Sonnet & PowerLogix Upgrades - start at $169  |  & CDRWs on Sale!  |

      Support Low End Mac <http://lowendmac.com/lists/support.html>

1st PowerMacs list info: <http://lowendmac.com/lists/1st-powermacs.shtml>
  --> AOL users, remove "mailto:";
Send list messages to:   <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:   <mailto:[EMAIL PROTECTED]>
For digest mode, email:  <mailto:[EMAIL PROTECTED]>
Subscription questions:  <mailto:[EMAIL PROTECTED]>
List archive:            <http://mail.maclaunch.com/lists/1st-powermacs/>


---------------------------------------------------------------
>The Think Different Store
http://www.ThinkDifferentStore.com
---------------------------------------------------------------

Reply via email to