I am planning to make a cable modem router out of a 1st powermac. Since first I thought of a 6100 due to its compactness. Someone suggested even earlier model. I have a IIsi, a IIvx and a Performa 475. The latter is of my great interest since it is a 68040 (LC), it sports a LC PDS card with RJ45 ethernet port and is even more compact than 6100. I do have a 7.5.3 on it but have thought of installing debian 68k linux. Before reminding me to post this on another list here are my questions:
I think I need two ethernet ports on the machine - one that will connect directly to the cable modem with a fixed ip and another that will be connected to a switch and feed the LAN with it. How do I get two ethernet ports on any machine that sports only one expansion slot? Of all pre-PCI machines only the IIvx has several NuBus slots. Could an appletalk-ethernet hardware bridge be of use? Is there perhaps a NuBus ethernet card that sports two separate interfaces?
Regards, Boris
-- 1st-PowerMacs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
1st PowerMacs list info: <http://lowendmac.com/lists/1st-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> List archive: <http://mail.maclaunch.com/lists/1st-powermacs/>
---------------------------------------------------------------
The Think Different Store
http://www.ThinkDifferentStore.com ---------------------------------------------------------------
