I hope this fits under the once removed rule or something. I have a Beige G3, one of the originals. Runs fine. Spruced up a bit and running 315 Mhz with a 70Mhz bus speed.
The problem is this, and I believe has nothing to do with the upclocking. The machine has two HD's an IDE and a SCSI. OS 9.2.1 loaded on the IDE and OSX on the SCSI. Everything is fine, until I Zap the PRam. Then it only wants to boot in OSX. When, in X, I set the startup disc to the other drive with OS 9, it still boots to X on the SCSI drive. I have to boot with a Techtool CD, in it reset the startup drive to the IDE with OS 9 and it usually works. Any ideas why? Doug in Ohio -- 1st-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> 1st PowerMacs list info: <http://lowendmac.com/lists/1st-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> List archive: <http://mail.maclaunch.com/lists/1st-powermacs/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
