--- Doug <[EMAIL PROTECTED]> wrote:
> I hope this fits under the once removed rule or
> something.
>
> I have a Beige G3, one of the originals. Runs fine.
> Spruced up a bit and
> running 315 Mhz with a 70Mhz bus speed.
>
> The problem is this, and I believe has nothing to do
> with the upclocking.
> The machine has two HD's an IDE and a SCSI. OS 9.2.1
> loaded on the IDE and
> OSX on the SCSI. Everything is fine, until I Zap the
> PRam. Then it only
> wants to boot in OSX. When, in X, I set the startup
> disc to the other drive
> with OS 9, it still boots to X on the SCSI drive. I
> have to boot with a
> Techtool CD, in it reset the startup drive to the
> IDE with OS 9 and it
> usually works.
>
> Any ideas why?
>
> Doug in Ohio
We used to have G3s at Art-Mold, I tried zapping the
PRam a couple of times and the system tried to set the
printer output through the modem. Figured whatever
good zapping the PRam did, it wasn't worth going
through the system and resetting things!
__________________________________
Do you Yahoo!?
Take Yahoo! Mail with you! Get it on your mobile phone.
http://mobile.yahoo.com/maildemo
--
1st-PowerMacs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives |
-- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
1st PowerMacs list info: <http://lowendmac.com/lists/1st-powermacs.shtml>
--> AOL users, remove "mailto:";
Send list messages to: <mailto:[EMAIL PROTECTED]>
To unsubscribe, email: <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
List archive: <http://mail.maclaunch.com/lists/1st-powermacs/>
---------------------------------------------------------------
>The Think Different Store
http://www.ThinkDifferentStore.com
---------------------------------------------------------------
