I have a problem with my old 7100/80
I fired it up to check what RAM it had installed on Friday night and it worked great. I established it had 104MB so I took it apart and pulled 2 16MB SIMMs and replaced them with 32MB units. It didn't boot - just gave a black screen after the chime. I thought it was the RAM, pulled the new modules and replaced the 16MB ones. Still a black screen. I pulled the power and the PRAM battery and let it sit for a day, then tried again with just 2 32MB units that were in it all the time. Nothing. Still a black screen.
I've pulled the Jackhammer card and the hard disk off. No result. I am using a HPV card, which I could pull, but I don't see what use that would do. It all worked fine until I did this RAM swap...
-- Mark Benson
AIM - SilValleyPirate MSN - [EMAIL PROTECTED] Visit FlatPackMacs online: <http://fpm.68kmac.com> Visit my Homepage: <http://homepage.mac.com/markbenson>
"Never send a human to do a machine's job."
-The Matrix
-- 1st-PowerMacs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
1st PowerMacs list info: <http://lowendmac.com/lists/1st-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> List archive: <http://mail.maclaunch.com/lists/1st-powermacs/>
---------------------------------------------------------------
The Think Different Store
http://www.ThinkDifferentStore.com ---------------------------------------------------------------
