The nsslapd-cache-autosize was set to 0. We apply our own values.
To keep us afloat we have been forced to enable
nsslapd-cache-autosize. However, our performance has degraded in
response times and feel we are not able to better allocate/customize
the cache settings as they relate to each database.
System: Virtual Machine
8-CPU
64GB RAM (of which 35G is free)
Two databases in the slapd instance:
userRoot = 21G
groupRoot = 1.8G
When we try to allocate anything above 50% for
nsslapd-cache-autosize, the service fails to start stating values
cannot exceed 100.
When we disable nsslapd-cache-autosize, and punch in our numbers:
nsslapd-cache-autosize = 0
nsslapd-dbcachesize = 1073741824
nsslapd-cachememsize = 2147483648 (groupRoot) and 23622320128 (userRoot)
Service overwrites our settings and sets both databases to
2147483648. While that is ok for groupRoot, it is not for userRoot.
Based on this information, is there a way/recommendation to:
1. To force these values we enter to "stick"
Paul M. Whitney, RHCSA, CISSP
Chesapeake IT Consulting, Inc.
2680 Tobacco Rd
Chesapeake Beach, MD 20732
Work: 443-492-2872
Cell: 410.493.9448
Email: paul.whit...@chesapeake-it.com
<mailto:paul.whit...@chesapeake-it.com>
*CONFIDENTIALITY NOTICE*
The information contained in this facsimile or electronic message is
confidential information intended for the use of the individual or
entity named above. If the reader of this message is not the
intended recipient, or an employee or agent responsible for
delivering this facsimile message to the intended recipient, you are
hereby notified that any dissemination, or copying of this
communication is strictly prohibited. If this message contains
non-public personal information about any consumer or customer of
the sender or intended recipient, you are further prohibited under
penalty of law from using or disclosing the information to any third
party by provisions of the federal Gramm-Leach-Bliley Act. If you
have received this facsimile or electronic message in error, please
immediately notify us by telephone and return or destroy the
original message to assure that it is not read, copied, or
distributed by others.
------------------------------------------------------------------------
*From:* William Brown <wbr...@suse.de>
*Sent:* Tuesday, January 15, 2019 7:22:18 PM
*To:* 389-users@lists.fedoraproject.org
*Cc:* Paul Whitney
*Subject:* Re: [389-users] Problem with userRoot cache
> On 16 Jan 2019, at 06:49, Mark Reynolds <mreyno...@redhat.com> wrote:
>
> What version were you previously on?
>
> Sounds like an issue with autocache sizing. The errors log might
give more info about why its being reset.
>
> Also check if "nsslapd-cache-autosize" is set under
"cn=config,cn=ldbm database,cn=plugins,cn=config". If it is, set it
to zero to stop the autosizing.
Certainly is sounds like autosizing is still enabled here and is
just resetting your values on you.
>
>
> On 1/15/19 3:42 PM, Paul Whitney wrote:
>> We recently updated to 389-ds-base-1.3.8.4-18. I am not sure I
can attribute this issue to this update since we are now just
discovering it. But setting the nsslapd-cachememsize is reverting
to a default value of 2GB. I have attempted to restore the value
through the console and restarting the instance. I have also tried
by stopping instance and manually editing the dse.ldif file. In
both cases, the value is replaced with 2GB value.
>>
>> Any suggestions?
>>
>> Paul M. Whitney
>> RHCSA, VCP, CISSP, Security+
>> Chesapeake IT Consulting, Inc.
>> 2680 Tobacco Rd
>> Chesapeake Beach, MD 20732
>>
>> Work: 443-492-2872
>> Cell: 410.493.9448
>> Email: paul.whit...@chesapeake-it.com
>> CONFIDENTIALITY NOTICE
>> The information contained in this facsimile or electronic message
is confidential information intended for the use of the individual
or entity named above. If the reader of this message is not the
intended recipient, or an employee or agent responsible for
delivering this facsimile message to the intended recipient, you are
hereby notified that any dissemination, or copying of this
communication is strictly prohibited. If this message contains
non-public personal information about any consumer or customer of
the sender or intended recipient, you are further prohibited under
penalty of law from using or disclosing the information to any third
party by provisions of the federal Gramm-Leach-Bliley Act. If you
have received this facsimile or electronic message in error, please
immediately notify us by telephone and return or destroy the
original message to assure that it is not read, copied, or
distributed by others.
>>
>>
>>
>> _______________________________________________
>> 389-users mailing list --
>> 389-users@lists.fedoraproject.org
>>
>> To unsubscribe send an email to
>> 389-users-le...@lists.fedoraproject.org
>>
>> Fedora Code of Conduct:
>> https://getfedora.org/code-of-conduct.html
>>
>> List Guidelines:
>> https://fedoraproject.org/wiki/Mailing_list_guidelines
>>
>> List Archives:
>>
https://lists.fedoraproject.org/archives/list/389-users@lists.fedoraproject.org
> _______________________________________________
> 389-users mailing list -- 389-users@lists.fedoraproject.org
> To unsubscribe send an email to
389-users-le...@lists.fedoraproject.org
> Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html
> List Guidelines:
https://fedoraproject.org/wiki/Mailing_list_guidelines
<https://fedoraproject.org/wiki/Mailing_list_guidelines>
> List Archives:
https://lists.fedoraproject.org/archives/list/389-users@lists.fedoraproject.org
—
Sincerely,
William Brown
Software Engineer, 389 Directory Server
SUSE Labs
_______________________________________________
389-users mailing list --389-users@lists.fedoraproject.org
To unsubscribe send an email to389-users-le...@lists.fedoraproject.org
Fedora Code of Conduct:https://getfedora.org/code-of-conduct.html
List Guidelines:https://fedoraproject.org/wiki/Mailing_list_guidelines
List
Archives:https://lists.fedoraproject.org/archives/list/389-users@lists.fedoraproject.org