I am getting this message: "The database cannot be published" when
opening 4D and 4D Server v15.3 on a Mac.
I read the following KB articles:
See:http://kb.4d.com/assetid=76962
And:http://kb.4d.com/assetid=77334
And: http://kb.4d.com/assetid=76029
When I checked to see if port 443 was being used, it did not appear to be. If
I change the port to something other than 443, e.g. 440... then it works. I'm
wondering why 443 is being blocked. When I did some research, I read I should
only use 443 for security reasons.
Here is the result when using the following command in the console: sudo lsof
-i -P | grep '4D'
4D\x20Ser 25055 Ken 52u IPv6 0xe7ac4cd1073bf1d9 0t0 TCP
*:19812 (LISTEN)
4D\x20Ser 25055 Ken 53u IPv6 0xe7ac4cd1073bf619 0t0 TCP
*:19814 (LISTEN)
4D\x20Ser 25055 Ken 54u IPv6 0xe7ac4cd10e1573d9 0t0 TCP
*:19813 (LISTEN)
4D\x20Ser 25055 Ken 55u IPv4 0xe7ac4cd108bdc941 0t0 UDP
*:19813
4D\x20Ser 25055 Ken 56u IPv6 0xe7ac4cd1073bfa59 0t0 TCP
*:440 (CLOSED)
Any thoughts regarding why port 443 might not be working -- or if there is
another acceptable port to use would be very much appreciated.
Thanks,
Ken
**********************************************************************
4D Internet Users Group (4D iNUG)
FAQ: http://lists.4d.com/faqnug.html
Archive: http://lists.4d.com/archives.html
Options: http://lists.4d.com/mailman/options/4d_tech
Unsub: mailto:[email protected]
**********************************************************************
