Hi all. In the v16 Conversion doc, I noticed the following instruction. I see it was the same from at least 4D v13, and it has caused me no problems so far, but I'd like to make sure there are no problems in the future...
The SET PRINT OPTION command is used to modify, by programming, the value of a print option. Each option defined using this command is applied to the entire database and for the duration of the session as long as no other command that modifies print parameters (PRINT SETTINGS, PRINT SELECTION without the > parameter, etc.) is called... What does this actually mean? - does "entire database" mean all printing for the current process or all printing for all processes? (I assume the latter) - does "duration of the session" mean until the user quits or until the process finishes? (I assume it is "user quits”) Let's say that I have 2 processes, each doing a report that takes a while and they both set the same Print Option but with different values at the start of their process, does the above mean that the latest of the processes will over-rule the Print Option set in the first process? I assume that if the reports are inside a print job (except for page orientation) , their settings will not be affected, but what if they are not in a Print Job or the page orientation is changed in the second process? I have not tested it as experience has taught me that current behaviour can change if the docs say something and the actual behaviour is something else and the engineers decide to fix it - so I would prefer to clearly understand the docs and how to prevent a clash between processes. Thanks for any clarity you can offer me. Cheers, Keith ********************************************************************** 4D Internet Users Group (4D iNUG) FAQ: http://lists.4d.com/faqnug.html Archive: http://lists.4d.com/archives.html Options: http://lists.4d.com/mailman/options/4d_tech Unsub: mailto:[email protected] **********************************************************************

