Tom:
Thank you for posting this info! I'll run up a copy of V11 and convert them. -- Douglas von Roeder 949-336-2902 On Wed, Aug 2, 2017 at 8:11 AM, Tom DeMeo via 4D_Tech <[email protected]> wrote: > Hi Doug, > > > I had a conversion with this problem going from v11 to v15. There were > numerous quick reports that were written in 2004 and were being used, but > not re-saved in v11. > > Quick Reports written in 2004 would open v11 but not v15. If they are > saved in v11, we found you can then open them in v15. I don’t know about > v12-14, but some or all of those might serve to bridge this gap too. > > We did not automate conversions because we had lots of users who stored > quick report files locally. We sent out notes to have them prep their > reports for the conversion. > > > > Tom DeMeo > ********************************************************************** > 4D Internet Users Group (4D iNUG) > FAQ: http://lists.4d.com/faqnug.html > Archive: http://lists.4d.com/archives.html > Options: http://lists.4d.com/mailman/options/4d_tech > Unsub: mailto:[email protected] > ********************************************************************** > ********************************************************************** 4D Internet Users Group (4D iNUG) FAQ: http://lists.4d.com/faqnug.html Archive: http://lists.4d.com/archives.html Options: http://lists.4d.com/mailman/options/4d_tech Unsub: mailto:[email protected] **********************************************************************
