Alan, If you are running the databases on different servers each with their own IP address you should not need to change the ports at all. In this case, if both are set with the default ports then they will both be visible under available.
If you are running two or more servers on the same server/ip address then you must change one of the databases to broadcast on different ports. The server with the changed ports will not be visible under available to a client that has not itself been customised. Instead you would need to click on the server that is available then go to the custom tab change the name and add the port number to the end of the IP address with a colon at the start such as “:19001” Regards, Dougie ________________________________________________________ telekinetix Limited- J. Douglas Cryer Phone : 01234 761759 Mobile : 07973 675 218 2nd Floor Broadway House, 4-6 The Broadway, Bedford MK40 2TE Email : [email protected] <mailto:[email protected]> Web : http://www.telekinetix.com <http://www.telekinetix.com/> ________________________________________________________ ********************************************************************** 4D Internet Users Group (4D iNUG) FAQ: http://lists.4d.com/faqnug.html Archive: http://lists.4d.com/archives.html Options: http://lists.4d.com/mailman/options/4d_tech Unsub: mailto:[email protected] **********************************************************************
