Hi Keith, Considering this issue. Last week I had to repair a v16 datafile. In the MSC, right after the repair I ran a verification. The verification was done on the old datafile. The repaired datafile was still in the subfolder '...repairing...' instead of on the original location as I would expect. I did not test yet, but I guess the files are switched when the MSC is closed and not when the repair (compact) is finished. And the extra verify disturbed this procedure.
Did you do something similar when compacting? Kind regards, Koen > Op 1 dec. 2018, om 21:41 heeft Keith Goebel via 4D_Tech > <[email protected]> het volgende geschreven: > > Using v17HF3 I have found that, after compacting on Win7, the data files are > in the opposite place they are supposed to be (i.e. the compacted one is in > the “old” folder and the old one is now the current one). -------------------- Compass bvba Koen Van Hooreweghe Kloosterstraat 65 9910 Knesselare Belgium tel +32 495 511.653 ********************************************************************** 4D Internet Users Group (4D iNUG) Archive: http://lists.4d.com/archives.html Options: https://lists.4d.com/mailman/options/4d_tech Unsub: mailto:[email protected] **********************************************************************
