Lutz, The six components not loaded were internal to 4D. 4D would not launch because of the 2019 compatibility mode not enabled. It never got to “running”, where it would be able to open an 4D structure.
Yes, I tested the nightly build of v17R5.239769, and it would NOT run 4D on that WS2019, without compatibility mode enabled. David Ringsmuth From: Epperlein, Lutz (agendo) via 4D_Tech Sent: Wednesday, July 31, 2019 2:27 AM To: 4D iNug Technical Cc: Epperlein, Lutz (agendo) Subject: AW: can't load internal 4D component Hi David, a question regarding this compatibility mode: Did you try it with 4D v17R5 too? In your first posting you only mentioned v17R4. The Software requirements document (https://download.4d.com/Documents/Products_Documentation/LastVersions/Line_17R5/VIntl/4D_v17_R5_SystemRequirements_EN.pdf) by 4D states 4D v17R5 is supported by Windows Server Systems in the range of Windows Server 2012 – Windows Server 2019. It would be at least disappointing if it we have to switch such a compatibility setting on. This means more or less 4D is even not compatible with Windows server 2019. Or is your component the cause of the trouble? Regards Lutz -----Ursprüngliche Nachricht----- Von: 4D_Tech [mailto:[email protected]] Im Auftrag von David Ringsmuth via 4D_Tech Gesendet: Dienstag, 30. Juli 2019 21:09 Betreff: RE: can't load internal 4D component FYI: This case is solved! Windows Server 2019 may require a compatibility mode enabled to allow 4D to run. When it was enables, the 4D sofware began running correctly. David Ringsmuth ********************************************************************** 4D Internet Users Group (4D iNUG) Archive: http://lists.4d.com/archives.html Options: https://lists.4d.com/mailman/options/4d_tech Unsub: mailto:[email protected] ********************************************************************** ********************************************************************** 4D Internet Users Group (4D iNUG) Archive: http://lists.4d.com/archives.html Options: https://lists.4d.com/mailman/options/4d_tech Unsub: mailto:[email protected] **********************************************************************
