Of course! Surprisingly on this one, the wiki is actually reasonably up to date, and also has links to the vendors guides!
https://wiki.57north.org.uk/doku.php?id=projects:3d_printer#how_to_3d_print_an_stl Because of the filament being a bit old, it absolutely needs to be replaced beforehand https://wiki.57north.org.uk/doku.php?id=projects:3d_printer#replacing_the_3d_filament Alternatively, you may just wish to replace it with a different colour, as you might not want a lime green box! I recommend bringing the STL on a USB stick, the internet at the moment is questionable at best! I can be around to assist, if you wish. I'll probably add some more detail to the wiki at some point. Alternatively, I can just do it if you'd rather! -- Hibby MM0RFN On Thu, 10 Dec 2020, at 10:23 AM, Tony Travis wrote: > Hi, > > Can anyone make one of these for me or show me how to do it myself on > the 3D-printer at the Hackspace? > > Thanks, > > Tony. > > _______________________________________________ > 57north-discuss mailing list > [email protected] > http://lists.57north.co/listinfo/57north-discuss > > > *Attachments:* > * Spring Roll.stl
_______________________________________________ 57north-discuss mailing list [email protected] http://lists.57north.co/listinfo/57north-discuss
