Hi :) because of troubles with Rosegarden for 64 Studio 2.1, I'll try to use Qtractor with 64 Studio 3.0. As long as 64 Studio 3.0 isn't released, I'll run Qtractor and Fluidsynth-DSSI under Suse 11.0, but there seems to be problems for Fluidsynth, because when running Qtractor and Qsynth, I also get much too often crashes.
It doesn't matter what I run, Rosegarden under 64 Studio or Suse, or Qtractor under Suse. It's not clear which application will make the systems unstable, but running jackd and Qsynth alone under Suse, let Qsynth crash. The used hardware, when I did the debugging: Mobo ASUS M2A-VM HDMI BIOS version 2201 On-board sound and HDMI are disabled, the HDMI card is removed The on-board ATI Radeon X1250-based graphics is controlled by the VESA driver CPU AMD Athlon BE-2350 Sound card TERRATEC EWX 24/96 Swissonic USB MIDI device, 1 input, 1 output RAM 1024 MB + 1024 MB - Framebuffer 128 MB What I did before debugging and when I debugged, also the versions of the relevant applications and other relevant information for the Suse install: Note: When I made test or tried to make music, I used different versions for some software, different kernel-rt and BIOS versions. /etc/security/limits.conf @audio - rtprio 99 @audio - memlock unlimited @audio - nice -19 kernel-rt 2.6.25.18-0.2-x86_64 from openSUSE-11.0-Updates alsa 1.0.16-39.1-x86_64 from repo-oss alsa-firmware 1.0.16-24.1-noarch from repo-oss jack 0.109.2-36.1-x86_64 from repo-oss, before the debugging I downgraded to jack 0.109.2-0.pm.1-x86_64 from http://ftp.skynet.be/pub/packman/suse/11.0/ some days ago the BIOS version was 2101, while fluidsynth and libfluidsynth1 were 1.0.8-50.1-x86_64 from repo-oss actually fluidsynth and libfluidsynth1 are 1.0.8-0.pm.1-x86_64 from http://ftp.skynet.be/pub/packman/suse/11.0/ qsynth 0.3.3-0.pm.1-x86_64 from http://ftp.skynet.be/pub/packman/suse/11.0/ This applications didn't run, when I debugged: fluidsynth-dssi 0.9.1-188.1-x86_64 from repo-oss qtractor 0.2.2-0.pm.1-x86_64 from http://ftp.skynet.be/pub/packman/suse/11.0/ I turned on the monitor and the computer. I booted Suse 11.0 and started a KDE3 session. I run KPowersave, CPU Frequency Policy: Performance. I run Konsole. I run su, 2 times ntpdate, Ctrl+D for exit. I run Thunderbird and created a new messages for this report. I run Firefox. I run hwinfo --help and hwinfo --memory. I run Konqueror file browser. I run uname -r. I run YaST2 GUI, resp. just Package Manager and Repository Manager. I closed Konqueror. I closed YaST2. I started the debugging with making a core file for Qsynth. Shell: [EMAIL PROTECTED]:~> ls ~/.config/rncbc.org QjackCtl.conf Qsynth.conf-BAK-01 Qtractor.conf [EMAIL PROTECTED]:~> jackd -R -p1024 -dalsa -r48000 -p256 -n2 -D -Chw:0 -Phw:0 jackd 0.109.2 Copyright 2001-2005 Paul Davis and others. jackd comes with ABSOLUTELY NO WARRANTY This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details JACK compiled with System V SHM support. loading driver .. apparent rate = 48000 creating alsa driver ... hw:0|hw:0|256|2|48000|0|0|nomon|swmeter|-|32bit control device hw:0 configuring for 48000Hz, period = 256 frames (5.3 ms), buffer = 2 periods ALSA: final selected sample format for capture: 32bit little-endian ALSA: use 2 periods for capture ALSA: final selected sample format for playback: 32bit little-endian ALSA: use 2 periods for playback I opened Shell No. 2 for Konsole and went on. [EMAIL PROTECTED]:~> ulimit -c 10240 [EMAIL PROTECTED]:~> ulimit -c 10240 [EMAIL PROTECTED]:~> ulimit -c 10240 [EMAIL PROTECTED]:~> qsynth -v Qsynth1 Setup... > Audio > changed Sample Rate to 48000 and Polyphony to 16 Soundfont > loaded /mnt/music_sata/mix_vol_1.sf2/PC51f.sf2 OK > Yes Added A New Engine, QSynth2 Audio > changed Sample Rate to 48000 and Polyphony to 16 Soundfont > loaded /mnt/music_sata/mix_vol_1.sf2/PC51f.sf2 OK Added A New Engine, QSynth3 Audio > changed Sample Rate to 48000 and Polyphony to 16 Soundfont > loaded /mnt/music_sata/mix_vol_1.sf2/PC51f.sf2 OK Added A New Engine, QSynth4 Audio > changed Sample Rate to 48000 and Polyphony to 16 Soundfont > loaded /mnt/music_sata/mix_vol_1.sf2/PC51f.sf2 OK Disabled Reverb and Chorus for Qsynth1. Disabled Reverb and Chorus for Qsynth2. Disabled Reverb and Chorus for Qsynth3. Disabled Reverb and Chorus for Qsynth4. Options... > enabled ~/qsynth.log > OK I got this new messages in Shell (No. 1): subgraph starting at qsynth timed out (subgraph_wait_fd=9, status = 0, state = Running) **** alsa_pcm: xrun of at least 1227621106974.720 msecs subgraph starting at Qsynth2 timed out (subgraph_wait_fd=9, status = 0, state = Triggered) **** alsa_pcm: xrun of at least 1227621106974.720 msecs subgraph starting at Qsynth2 timed out (subgraph_wait_fd=14, status = 0, state = Triggered) **** alsa_pcm: xrun of at least 1227621106974.720 msecs I guess this is ok, because of adding and editing engines for Qsynth. QSynth1 > Channels > Changed Ch 1 Bank 0 Prog 0 to Bank 128 Prog 25 > OK > (default) Save and closed this window QSynth2 > Setup... > Soundfonts > loaded /mnt/music_sata/mix_vol_1.sf2/Drums/Acoustic drum set.SF2, removed /mnt/music_sata/mix_vol_1.sf2/PC51f.sf2 OK > Yes QSynth1 > Setup... > MIDI > changed client ID to QSynth1 > Audio > chaged Sample Format to float OK > Yes QSynth2 > Setup... > Audio > changed Sample Format to float OK > Yes I was thinking of taking a look if the client names for Qsynth MIDI and Audio were fine, but before I could take care of this, QSynth crashed and jackd was killed. To the Shell (No. 1) messages was added: subgraph starting at Qsynth3 timed out (subgraph_wait_fd=14, status = 0, state = Triggered) **** alsa_pcm: xrun of at least 1227621106974.720 msecs **** alsa_pcm: xrun of at least 1227621106974.720 msecs subgraph starting at Qsynth2 timed out (subgraph_wait_fd=21, status = 0, state = Running) **** alsa_pcm: xrun of at least 1227621106974.720 msecs subgraph starting at qsynth timed out (subgraph_wait_fd=21, status = 0, state = Running) jackd watchdog: timeout - killing jackd [EMAIL PROTECTED]:~> To the Shell No. 2 messages was added: Killed [EMAIL PROTECTED]:~> I closed Shell No. 2 and continued with Shell (No. 1). [EMAIL PROTECTED]:~> cd ~/.config/rncbc.org [EMAIL PROTECTED]:~/.config/rncbc.org> ls QjackCtl.conf Qsynth.conf Qsynth.conf-BAK-01 Qtractor.conf [EMAIL PROTECTED]:~/.config/rncbc.org> cp Qsynth.conf Qsynth.conf-BAK-02 [EMAIL PROTECTED]:~/.config/rncbc.org> ls QjackCtl.conf Qsynth.conf Qsynth.conf-BAK-01 Qsynth.conf-BAK-02 Qtractor.conf I opened Konqueror file browser. In the users home there is a file qtractor.log, but it includes no messages for today and there also is no core file. Without a core file, I can't go on with gdb, I only can add the latest Qsynth.conf. I started at ntpdate atom.uhr.de 25 Nov 14:56:17 and finished at ntpdate ntp.favey.ch 25 Nov 19:14:05. Cheers, Ralf
[Presets] DefPreset=(default) [SoundFonts] SoundFont1=/mnt/music_sata/mix_vol_1.sf2/PC51f.sf2 BankOffset1=0 [Settings] DisplayName=Qsynth1 MidiIn=true MidiDriver=alsa_seq MidiDevice= MidiChannels=16 AlsaName=Qsynth1 AudioDriver=jack AudioDevice= JackName=qsynth JackAutoConnect=true JackMulti=false AudioChannels=1 AudioGroups=1 AudioBufSize=64 AudioBufCount=2 SampleFormat=float SampleRate=48000 Polyphony=16 ReverbActive=false ReverbRoom=0.200000002980232 ReverbDamp=0 ReverbWidth=0.5 ReverbLevel=0.899999976158142 ChorusActive=false ChorusNr=3 ChorusLevel=2 ChorusSpeed=0.300000011920929 ChorusDepth=8 ChorusType=0 LadspaActive=false Gain=1 Server=false MidiDump=false Verbose=true [History] MessagesLogPathComboBox\Item1=~/qsynth.log [Geometry] qsynthChannelsForm\x=0 qsynthChannelsForm\y=0 qsynthChannelsForm\width=373 qsynthChannelsForm\height=240 qsynthChannelsForm\visible=false [Preset] Chan1=0:128:25 Chan2=1:0:1 Chan3=2:0:2 Chan4=3:0:3 Chan5=4:0:4 Chan6=5:0:5 Chan7=6:0:6 Chan8=7:0:7 Chan9=8:0:8 Chan10=9:128:0 Chan11=10:0:10 Chan12=11:0:11 Chan13=12:0:12 Chan14=13:0:13 Chan15=14:0:14 Chan16=15:0:15 [Engine] Qsynth2\Presets\DefPreset=(default) Qsynth2\SoundFonts\SoundFont1=/mnt/music_sata/mix_vol_1.sf2/Drums/Acoustic drum set.SF2 Qsynth2\SoundFonts\BankOffset1=0 Qsynth2\Settings\DisplayName=Qsynth2 Qsynth2\Settings\MidiIn=true Qsynth2\Settings\MidiDriver=alsa_seq Qsynth2\Settings\MidiDevice= Qsynth2\Settings\MidiChannels=16 Qsynth2\Settings\AlsaName=Qsynth2 Qsynth2\Settings\AudioDriver=jack Qsynth2\Settings\AudioDevice= Qsynth2\Settings\JackName=Qsynth2 Qsynth2\Settings\JackAutoConnect=true Qsynth2\Settings\JackMulti=false Qsynth2\Settings\AudioChannels=1 Qsynth2\Settings\AudioGroups=1 Qsynth2\Settings\AudioBufSize=64 Qsynth2\Settings\AudioBufCount=2 Qsynth2\Settings\SampleFormat=float Qsynth2\Settings\SampleRate=48000 Qsynth2\Settings\Polyphony=16 Qsynth2\Settings\ReverbActive=false Qsynth2\Settings\ReverbRoom=0.200000002980232 Qsynth2\Settings\ReverbDamp=0 Qsynth2\Settings\ReverbWidth=0.5 Qsynth2\Settings\ReverbLevel=0.899999976158142 Qsynth2\Settings\ChorusActive=false Qsynth2\Settings\ChorusNr=3 Qsynth2\Settings\ChorusLevel=2 Qsynth2\Settings\ChorusSpeed=0.300000011920929 Qsynth2\Settings\ChorusDepth=8 Qsynth2\Settings\ChorusType=0 Qsynth2\Settings\LadspaActive=false Qsynth2\Settings\Gain=1 Qsynth2\Settings\Server=false Qsynth2\Settings\MidiDump=false Qsynth2\Settings\Verbose=false
_______________________________________________ 64studio-users mailing list [email protected] http://lists.64studio.com/mailman/listinfo/64studio-users
